基于井口涌水量变化类型判断岩溶含水层厚度

针对含水相对均匀的溶洞-裂隙水含水岩组,为判断岩溶含水层厚度,通过对空气潜孔锤钻进工艺施工钻孔井口涌水量变化进行分析,结果发现:利用该工艺施工的钻孔井口涌水量一般会出现稳定型、降低型和增长型三种变化类型;井口涌水量变化类型反映了岩溶含水层是空间尺度上发育的垂向地下水系统,具有分层特征,其厚度与碳酸盐岩岩溶化程度的不均一性耦合,体现了碳酸盐岩岩体内不同空隙的发育规模、密度及其相互间的联系程度;明确了地下水埋深状况以及含水层的构成条件。故采用空气潜孔锤钻进工艺施工的钻孔,在非干孔情形下,可以利用井口涌水量的变化类型判断岩溶含水层厚度。     

Assessment of the maximum allowed acid deposition load at current stage in China

Soil acidification caused by acid deposition has been significant in some forests in southern China. We present an approach for assessing the current stage maximum allowed load (SML) of acid deposition for terrestrial system in the country. The main idea was that soil base cation exchange as a finite buffer to acidity was included in the soil acidity mass balance calculation at current acidification stage. We calculated the SML for five forests in southern China. The usual critical loads for the same forests were also calculated by the steady state mass balance model for comparison. The results showed that the SML is a more tolerant limit than the critical load for the forests with soils not acidified seriously at current stage. However, the SML become a more stringent limit to acid deposition when the forest soils have acidified seriously to very low base cation saturation. In this case the SML assessment is beneficial for the soils recovering from a serious acidified state. Based on a national scale database, the SML mapping for non-agricultural soil system in China was carried out.     

An analysis of the likely success of policy actions under uncertainty: Recovery from acidification across Great Britain

In the context of wider debates about the role of uncertainty in environmental science and the development of environmental policy, we use a Generalised Likelihood Uncertainty Estimate (GLUE) approach to address the uncertainty in both acid deposition model predictions and in the sensitivity of the soils to assess the likely success of policy actions to reduce acid deposition damage across Great Britain. A subset of 11, 699 acid deposition model runs that adequately represented observed deposition data were used to provide acid deposition distributions for 2005 and 2020, following a substantial reduction in SO₂ and NO_x emissions. Uncertain critical loads data for soils were then combined with these deposition data to derive estimates of the accumulated exceedance (AE) of critical loads for 2005 and 2020. For the more sensitive soils, the differences in accumulated exceedance between 2005 and 2020 were such that we could be sure that they were significant and a meaningful environmental improvement would result. For the least sensitive soils, critical loads were largely met by 2020, hence uncertainties in the differences in accumulated exceedance were of little policy relevance. Our approach of combining estimates of uncertainty in both a pollution model and an effects model, shows that even taking these combined uncertainties into account, policy-makers can be sure that the substantial planned reduction in acidic emissions will reduce critical loads exceedances. The use of accumulated exceedance as a relative measure of environmental protection provides additional information to policy makers in tackling this ‘wicked problem’.     

填埋场垃圾堆体平面压实工程试验研究

原生垃圾密度很小，为提高填埋垃圾堆体密实度、延长填埋场使用寿命，对填埋垃圾进行压实处理很重要。本文通过现场工程试验对影咱填埋垃圾堆体平面压实效果的主要因素进行了系统研究。实验结果表明：为取得最佳的垃圾堆体平面压实效果，最佳垃圾摊铺厚度在0.5m—0.7m之间，最佳机械行程次数为3次，增加碾压次数有利于提高垃圾堆体密实度，垃圾最佳含水率在30％——50％之间。     

“The commons” as a dynamic variable in understanding strategic alliances of scale: A groundwater case study in Pajaro Valley,California

Groundwater, a critical resource in many parts of the world, is often characterized as a common pool resource (Brozovic et al., 2006). Multiple individuals utilize groundwater from a basin, and each person has the capacity to reduce the quantity or quality available to others. We turn to a case study of the Pajaro Groundwater Basin in Central California to re-envision the characterization of “commons.” While providing a useful frame from which to analyze groundwater depletion in the Pajaro, we find Common Pool Resource (CPR) theory to be imprecise in its approach to a geographic scale. The notion of the “commons” is central to CPR studies, but there is wide divergence in what the “commons” constitutes, both spatially and socially (Laerhoven and Ostrom, 2007). Rather than propose a normative definition for the “commons,” we suggest that the “commons” as a geographic category is socially constructed and dynamically active over time, akin to the analytic of scale as developed within the fields of political ecology and geography. This move from situating the “commons” as a fixed and discrete geographic area to that which is constantly changing and relational helps us to better understand the ways in which water users collaborate and communicate around shared groundwater sources.     

微波在废树脂中的穿透厚度研究

通过对不同功率微波在不同规格钢桶中对不同含水率的树脂中的穿透厚度的研究可知,微波在树脂中的穿透厚度主要与树脂自身含水率有关,与钢桶的规格尺寸也有一定的关系,而微波功率的影响则可基本忽略不计;对于含水率50％左右的树脂,微波在12L钢桶中的穿透厚度是130 mm;在200L钢桶中的穿透厚度是70mm.该研究成果对微波干燥工艺的具体参数的选取和扩大规模台架装置的设计研究等有重要意义.     

滁州地区覆盖层厚度对场地地震动参数的影响

以滁州地区近百个钻孔资料为原型建立土层模型,采用一维频域等效线性化波动方法进行了土层地震反应分析,重点分析了覆盖层厚度对场地地震动参数的影响。研究结果表明,随着覆盖层厚度的增加,地表峰值加速度及土层放大系数逐渐增大,当覆盖层厚度超过一定值时,地表峰值加速度及土层放大系数呈逐渐缓慢减小的趋势;而反应谱特征周期总体上随着覆盖层厚度的增加而逐渐增大。     

曲面零件在拉深过程中内皱时刻及影响因素

进一步推导了曲面零件悬空区上的应力分布及临界失稳公式。然后通过计算机编程 ,求解了临界失稳方程 ,得到了拉深系数、相对锥顶半径、相对圆角半径、材料相对厚度与临界失稳时刻间的关系曲线 ,并对曲线变化的规律进行了分析。     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

Smoldering combustion of dust layer on hot surface

The critical temperature as well as the critical flux for ignition of a dust layer of cornflour and a mixture of wheatflour and cornflour (80% wheatflour+20% cornflour) on a hot plate have been determined. The moulded sample was cylindrical in shape and of different heights and diameters. The particle size of dusts ranged between 63 μm to 150 μm. The temperature–time histories for self-heating without ignition and with ignition are offered, showing the critical boundaries between them. Also the times to ignition for each dust, showing the effect of sample size on their values, are determined. Certain experimental correlations which relate to times to ignition, as well as the critical temperature for ignition and thermal and geometrical dimensions of sample are presented.