应用水滑石实时合成分离模拟核素钕

应用水滑石实时合成的方法从高放废液中分离模拟放射性核素钕,通过酸碱滴定、单因素试验及X-射线衍射(XRD)研究确定了最佳分离条件,用红外光谱(FT-IR)、扫描电镜(SEM)、透射电镜(TEM)等对合成的含钕水滑石的结构、形貌进行了分析. 结果表明:模拟放射性核素钕的最佳分离条件,初始ρ(Nd3+)为150 mg/L,pH为10,n(Mg)/［n(Al)+n(Nd)］为3,在该条件下5次平行试验钕的去除率平均值为96.40%,并且钕嵌入到了水滑石的晶格中,合成的含钕水滑石形貌大多为层状六边形;含钕水滑石煅烧产物主要为尖晶石,煅烧产物中未见氧化钕相,表明嵌入到水滑石晶格中的钕在煅烧后仍存在于尖晶石的晶体结构中.      

Validation of liquid nitrogen vaporisation rate by small scale experiments and analysis of the conductive heat flux from the concrete

The vaporisation of a liquid nitrogen pool spilled on concrete ground was investigated in small scale field experiments. The pool vaporisation rate and the heat transfer from the concrete ground were measured using a balance and a set of embedded heat flux sensors and thermocouples. The ability to predict the concrete's thermal properties based on these measurements was investigated. This work showed that a simple, one-dimensional theoretical model, assuming heat conduction through a semi-infinite ground with ideal contact between the cryogenic liquid and the ground, commonly used to describe the heat transfer from a ground to the LNG, can be used to match the observed vaporisation rate. Though estimated parameters, thermal conductivity and thermal diffusivity, do not necessary represent real values. Although the observed vaporization rate follows a linear trend, and thus can be well represented by the model, the overall model prediction seems to be overestimated. The temperature profile inside the concrete is slightly over-predicted at the beginning and under-predicted at later stage of the spill. This might be an effect of the dependence of the concrete's thermal properties on the temperature or may indicate an incorrect modelling and a varying temperature of the ground surface.     

高效液相色谱-质谱联用法测定饮用水中的五氯苯酚

建立了高效液相色谱-质谱联用法检测饮用水中五氯苯酚（PCP）。选用ZORBAXXDB-C18柱（50mm×2．1mm,3．5μm）为分析柱,流动相为V（甲醇）：V（纯水）=88：12,流量为200μL·min-1;质谱条件选用气动辅助电喷雾离子源（ESI）,检测方式为负离子多离子反应检测（MRM）;PCP标准曲线线形范围为0．1～100μg·L-1;方法加标回收率达到90％以上;相对标准偏差为2-31％-2．92％（n=5）;方法检测低限为0．1μg·L-1。结果表明该方法快速、简便、准确、灵敏、特异,适用于饮用水中PCP残留的测定。     

Effects of carrying handles,postures, materials and distances on carrying capability

This study recruited 14 industrial workers to examine the effects of carrying handles, postures, materials and distances on maximum acceptable weights of carrying (MAWC), and resulting heart rate and body rating of perceived exertion (RPE) for a 20 min intensive carrying task. This study showed that MAWC of carrying with bar handles, carrying with hands-and-body posture, solid materials and 4?m distance were significantly higher than that of carrying with groove handles, carrying with hands posture, liquid materials and 8?m distance, respectively. The resulting heart rates while carrying MAWCs of groove handles, hands-and-body carrying posture, solid materials and 4?m distance were lower than the resulting heart rates while carrying MAWCs of bar handles, hands carrying posture, liquid materials and 8?m distance, respectively. Most pair levels of independent variables resulted in similar body's RPEs except for the pair levels of carrying distance.     

Biorefinery study of availability of agriculture residues and wastes for integrated biorefineries in Brazil

Brazil has a great potential for use renewable raw materials in biorefineries. It is one of the largest producers of agricultural and animal commodities, which produce large amounts of residues and wastes. These agricultural residues and animal waste can be effectively transformed to energy and other products in systems similar to a ethanol refinery where an integrated process involves conversion for biomass into fuel, energy and chemicals, integrated in the context of a biorefinery. The objective of this work is the determination of the actual availability of main agricultural residues and animal wastes generated in Brazil and of their generation potential index and their prospects for 2020. The results indicate that the sugarcane has the highest agronomic availability, reaching 157 million tons of fresh material and an estimated reuse potential of 19.6 million tons (dry basis), followed by soybeans, rice, maize, orange, wheat, cotton, cassava and tobacco.     

羧化CTS微球对共存有机污染物的吸附研究

采用反相悬浮法制备交联羧甲基化壳聚糖微球,并用高效液相色谱法-紫外检测研究了改性壳聚糖微球对共存有机污染物的吸附。试验了吸附时间、溶液pH值、有机物的浓度等因素对水中共存有机污染物吸附的影响。结果表明,在有机物浓度相近的情况下,羧化改性壳聚糖微球对水中2,4-二硝基酚的去除量最大。     

Simulation studies of ammonia removal from water in a membrane contactor under liquid–liquid extraction mode

Simulation studies were carried out, in an unsteady state, for the removal of ammonia from water via a membrane contactor. The contactor had an aqueous solution of NH₃ in the lumen and sulphuric acid in the shell side. The model equations were developed considering radial and axial diffusion and convection in the lumen. The partial differential equations were converted by the finite difference technique into a series of stiff ordinary differential equations w.r.t. time and solved using MATLAB. Excellent agreement was observed between the simulation results and experimental data (from the literature) for a contactor of 75 fibres. Excellent agreement was also observed between the simulation results and laboratory-generated data from a contactor containing 10,200 fibres. Our model is more suitable than the plug-flow model for designing the operation of the membrane contactor. The plug-flow model over-predicts the fractional removal of ammonia and was observed to be limited when designing longer contactors.     

植物激素对平菇菌丝生长及酶活性的影响

采用固体平板和液体摇瓶培养方法,研究了赤霉素、2,4-D、吲哚乙酸和萘乙酸4种激素对平菇-126菌丝生长及酶活性的影响。结果表明,吲哚乙酸虽然能提高发酵液胞外蛋白的含量和过氧化物酶活性,但对菌丝的生长起抑制作用,这与吲哚乙酸能引起平菇菌丝裂解和细胞膜渗漏有关;萘乙酸、低浓度2,4-D能促进菌丝的伸长;萘乙酸、赤霉素在低浓度下也能促进菌丝的分枝,对菌丝的生长整体上起促进作用。除吲哚乙酸外,其他3种激素对平菇菌丝生长影响都有两重性：低浓度下能促进菌丝的生长,浓度过高则会对菌丝生长产生毒害作用。     

基于.NET Framework和Direct3D技术实现危险性液体储罐泄漏过程的三维仿真

由于windows操作系统的大面积使用,使得基于windows操作系统的Direct3D技术在游戏开发和三维仿真方面日益重要,已经成为事实上的3D标准,基于.NET Framework的3D技术的开发也是未来一个趋势,本文研究建立了描述危险性液体储罐泄漏过程的数值模型,基于.NETFramework,运用Direct3D技术开发了动态模拟软件,不仅实现了泄漏过程的三维动态效果,提高仿真的逼真程度,而且可以获取泄漏速率、泄漏量、液面高度和时间的关系。实例分析结果表明,本文所建立的数值模型和仿真方法是可行的,模拟仿真结果为危险性液体储罐泄漏事故后果定量风险评价和事故应急救援提供理论依据和基础数据,也可以应用于科研方面,进一步研究液体储罐泄漏机理,节省研究时人力物力和时间的消耗。     

关于GB18218-2009标准中易燃气体临界量分析

分析了我国重大危险源辨识标准的修订工作及评价方法的研究状况。新标准明确监管对象为危险化学品,并通过设立危险化学品类别及其临界量的方式拓展了监管范围。我国采用的重大危险源评价方法着重关注危险物质的种类和数量,以物质的固有危险性作为评判依据,更符合我国危险化学品现状。利用蒸气云爆炸及沸腾液体扩展蒸气爆炸两类事故模型对GB18218-2009中临界量的易燃气体可能的致害范围进行模拟分析。研究认为,危险化学品重大危险源的辨识是在物质固有危险性的基础上,综合考虑了事故发生频率、次要危险性、化学反应活性及对环境影响等诸多因素。