Effect of Hydrogen Peroxide on Industrial Waste Water Effluents: A Case Study of Warri Refining and Petrochemical Industry

This paper assessed the composition of waste water effluent generated by a Petrochemical industry and a treatment system developed to improve the quality of the discharge water. Parameters as pH, COD, TSS chloride and lead ions were analysed and treated comparatively using hydrogen peroxide. At pH 8.0 post treatment analysis showed a COD – 96 mg/l TSS – 48 mg/l Cl – 798.75 mg/l and Pb²⁺ – 2 mg/l for treatment D where 40 g/l of alum was used on 30% solution of H₂O₂ compared to systems A-C. Process treatment included activated clay with sodium ion resin which at pH 6.8 had COD – 52 mg/l, TSS – 10 mg/l, Cl – 510 mg/l and Pb²⁺ – 0.070 mg/l. This system has an overall efficiency of 79.0% TSS, 45.83% COD, 97.5% Pb²⁺ and 36.1% Cl reduction. Characteristics obtained for the study has a higher efficiency compared with FEPA and WHO standard for similar industrial water treatment.     

Assessment and optimisation of VOC mass transfer enhancement by advanced oxidation process in a compact wet scrubber

Dimethyl disulphide (DMDS) removal was investigated in a compact scrubber (hydraulic residence time ≈20 ms), composed of a wire mesh packing structure where liquid and gas flow at co-current and high gas superficial velocity (>12 m s⁻¹). In order to regenerate the scrubbing liquid and to maintain a driving force in the scrubber, ozone and hydrogen peroxide were added to water since they allow the generation of nonselective and highly reactive species, hydroxyl radicals HO. Three ways of reagent distribution were tested. The influence of several parameters (liquid flow rate(s), ozone flow rate, pH and reagent concentrations) was investigated. The best configuration was obtained when ozone is transferred in the scrubbing liquid before introduction at the top of the scrubber simultaneously with the hydrogen peroxide solution, allowing to generate hydroxyl radical in the scrubber. With this configuration, DMDS removal could be increased from 16% with water to 34% at the same gas and liquid flow rates in the scrubber showing the potentiality of advanced oxidation process.     

一起双氧水储罐爆炸事故的原因调查

错将水玻璃加到双氧水中,致使双氧水储罐爆炸,炸飞的罐体挂断供电线路,全厂断电停产23 h,经济损失100多万元,无人员伤亡.     

过氧化氢氧化-全自动石墨消解仪消解-阳极溶出伏安法测定海水中总铬

采用全自动石墨消解仪加热、在碱性条件下用过氧化氢氧化海水中的三价铬,优化了极谱法测定条件,方法检出限为0.20μg/L,加标回收率为82.8%~105%,相对标准偏差5%,且对有证标准样品测试的结果符合准确度要求。方法具有选择性好、灵敏度高、准确等特点,适用于海水中总铬的测定。     

Oral administration of potassium bromate, a major water disinfection by-product, induces oxidative stress and impairs the antioxidant power of rat blood

Potassium bromate (KBrO₃) is a widely used food additive, a water disinfection by-product and a known nephrotoxic agent. The effect of KBrO₃ on rat blood, especially on the anti-oxidant defense system, was studied in this work. Animals were given a single oral dose of KBrO₃ (100 mg/kg body weight) and sacrificed 12, 24, 48, 96 and 168 h after this treatment. Blood was collected from the animals and separated into plasma and erythrocytes. KBrO₃ administration resulted in increased lipid peroxidation, protein oxidation, hydrogen peroxide levels and decreased the reduced glutathione content indicating the induction of oxidative stress in blood. Methemoglobin levels and methemoglobin reductase activity were significantly increased while the total anti-oxidant power was greatly reduced upon KBrO₃ treatment. Nitric oxide levels were enhanced while vitamin C concentration decreased in KBrO₃ treated animals. The activities of major anti-oxidant enzymes were also altered upon KBrO₃ treatment. The maximum changes in all these parameters were 48 h after the administration of KBrO₃ and then recovery took place. These results show for the first time that KBrO₃ induces oxidative stress in blood and impairs the anti-oxidant defense system. Thus impairment in the anti-oxidant power and alterations in the activities of major anti-oxidant enzymes may play an important role in mediating the toxic effects of KBrO₃ in the rat blood. The study of such biochemical events in blood will help elucidate the molecular mechanism of action of KBrO₃ and also for devising methods to overcome its toxic effects.     

Synergistic increase in cell lethality by dieldrin and H2O2 in rat thymocytes: Effect of dieldrin on the cells exposed to oxidative stress

Dieldrin, one of persistent pesticides, is highly resistant to biotic and abiotic degradation. It is accumulated in organisms. Recent studies suggest that dieldrin exerts a potent cytotoxic action on cells exposed to oxidative stress. In this study, the effect of dieldrin on rat thymocytes exposed to hydrogen peroxide (H₂O₂)-induced oxidative stress was examined. Dieldrin at 5 μM and H₂O₂ at 300 μM slightly increased cell lethality from a control value of 5.4 ± 0.5% (mean ± standard deviation of four experiments) to 7.8 ± 1.3% and 9.0 ± 0.3%, respectively. Simultaneous application of dieldrin and H₂O₂ significantly increased cell lethality to 46.2 ± 1.8%. The synergistic increase in cell lethality was dependent on dieldrin concentration (0.3–5 μM) but not on H₂O₂ concentration (30–300 μM). Dieldrin accelerated H₂O₂-induced cell death, which was estimated with the help of annexin V-FITC and propidium iodide. Presence of either dieldrin or H₂O₂ decreased the cellular content of nonprotein thiol and increased intracellular Zn²⁺ concentration. The combination of dieldrin and H₂O₂ further pronounced these effects. TPEN, a chelator of intracellular Zn²⁺, significantly attenuated the synergistic increase in cell lethality induced by dieldrin and H₂O₂. It is, therefore, suggested that dieldrin augments the cytotoxicity of H₂O₂ in a Zn²⁺-dependent manner.     

改性活性炭对石煤提钒废水中低浓度NH3-N和V等的吸附

为研究石煤提钒离交尾水的深度处理技术,利用质量分数为1%、5%和10%的过氧化氢溶液对ZWY15型活性炭进行改性,得到3种改性活性炭即1%AC、5%AC和10%AC;探讨其对该废水中低浓度的NH3-N、V等的吸附效果。实验结果表明:AC或改性AC的加入可使废水的碱度升高,随着吸附时间及吸附剂投加量的增加,升高幅度增大,且不同改性AC对废水碱度提高的幅度不同;相较于未改性活性炭,过氧化氢改性活性炭对V的吸附效果明显提高,去除率最大可提高30%,对NH3-N的去除率提升约11%;当投加量为60 g/L时,10%AC可使废水中V的浓度降低至1.88 mg/L,此时废水中Cr、Cd和Zn的浓度分别降低至0.006、0.010和0.036 mg/L,均低于《钒工业污染物排放标准》(GB26452-2011)所规定的排放限值。     

碳纳米管电极原位产生过氧化氢及其对亚甲基蓝脱色效果

将碳纳米管固定化制成多孔疏水性导电薄膜构建电化学阴极还原体系,实现过氧化氢在阴极的原位产生。电极特性研究表明,电极在较宽的电压范围内均具有较好的活性。考察了阴极电位、电极成分、氧气流量和电解质浓度对过氧化氢原位产生的影响,在优化条件下经过120min后过氧化氢达到66．17mg／L,并探讨过氧化氢原位产生的机理。在此基础上考察原位过氧化氢氧化工艺下对亚甲基蓝的脱色效果,并分析其脱色机理。     

催化湿式过氧化法处理蒽醌-2-磺酸钠废水

以过渡金属Cu为主活性组分,通过加入第2活性组分Mn和稀土元素Ce,研制出适用于催化湿式过氧化法(CWPO)处理含高浓度蒽醌-2-磺酸钠有机废水的复合催化剂。考察了活性组分配比对催化剂的催化活性和稳定性的影响,并利用SEM和XRD表征手段,研究了掺杂Ce对催化剂表面微观结构的影响。结果表明,当Cu、Mn和Ce的质量比为-时,催化剂的催化性能最佳,在100 min内,废水COD的去除率能达到95.3%;掺杂Ce能有效提高活性组分在催化剂表面的分散程度从而改善催化剂的催化活性,并能有效抑制Cu的溶出。通过LC-MS分析该催化剂催化氧化蒽醌-2-磺酸钠降解过程中的代谢产物,推断出了催化氧化降解蒽醌-2-磺酸钠的途径。     

Cu-SBA-15催化湿式过氧化氢氧化水溶液中罗丹明B

采用水热晶化法合成了不同含铜量的Cu-SBA-15介孔分子筛,并且用XRD、N2吸附、TEM以及UV-vis对所合成的样品进行表征。以Cu-SBA-15为催化剂,H2O2为氧化剂,催化湿式过氧化水溶液中的罗丹明B,主要考察H2O2浓度、催化剂用量、处理温度、初始pH等因素对罗丹明B氧化效果的影响。结果表明,在同样的处理条件下罗丹明的脱色率明显高于TOC去除率,处理温度、初始pH对罗丹明B的脱色与氧化有重要影响。在罗丹明B初始浓度100 mg/L,H2O2初始浓度1.8 g/L,催化剂量0.3 g/L,温度60℃,pH为7.0,处理时间100 min时,罗丹明B的脱色率为98.6%,TOC去除率为62.8%。