Processing of whey from dairy industry waste

An investigation carried out in 11 dairies in Serbia has shows that 78.75 % of whey, a by-product of cheese industry, is emitted into river systems, thus contributing to the organic pollution of the environment. This pollution can be avoided by processing of whey into food and pharmaceuticals. It is shown that low-temperature regime of whey concentration and fractionation, based on vacuum concentration and diafiltration, preserves whey proteins undenaturated, as proved by differential scanning calorimetry method. Functional native whey proteins based food products, with potentially high immunomodulatory activity, are obtained.     

辐射热流作用下树叶样品的燃烧特征研究

研究植物叶样在外部热辐射和值班火源作用下的燃烧现象特征并探索其成因和物理及化学本质。采用锥形量热仪开展实验,热辐射强度分别设定为35kW m-2、55kW m-2、70kW m-2和85kW m-2。实验样品为针阔叶树种共13种,其含水率在45%至79%间变化。实验表明,样品表现出不同的着火模式,有的为明火,有的则为阴燃,取决于树种和设定的辐射强度。样品出现有焰燃烧现象的最低热释放速率峰值(PHRR)在22.3kW m-2至35.6kW m-2之间,反映了形成气相火焰所需最低挥发分质量流率。气相产物CO2产生速率的峰值与PHRR呈高度线性性,表明了不同样品间气相燃烧或固相表面氧化(阴燃燃烧)反应的相似性。进一步分析表明,出现的独特热释放速率尖锐峰形是样品分层特性以及树叶的物理属性和热物性共同作用的结果。具有热薄特性的样品表层,在实验初期是接受外部辐射热的主体,其热解的产物是形成气相火焰的物质来源;在其转变为焦炭层后,对辐射热流向内层的渗透具有阻挡作用。建立起来的认识对于评估分层样品的燃烧性有一定的指导意义。     

SC110型汽车半轴齿轮的冷摆辗成形

简介PXW-200型冷摆辗机的结构与原理.概述冷摆辗SC110半轴齿轮的工艺设计及工艺参数,模具结构和制造.     

过氧乙酸溶液的热爆炸分析

为有效预防生产、储运和使用中过氧乙酸引发的火灾爆炸事故,采用绝热加速量热仪模拟了15%和10%浓度的过氧乙酸溶液的热爆炸过程,得到了两种浓度的PAA溶液的热分解温度、压力、温升速率随时间变化的关系曲线,并用速率常数法分别计算了反应级数n、表观活化能Ea和指前因子A。经过绝热修正,得到最危险状态下的温度和压力等相关热危险参数,并基于Semenov热爆炸理论推算了三种包装条件下两种样品的不可逆温度和自加速分解温度。结果表明,15%PAA和10%PAA溶液热分解反应级数均为一级,表观活化能分别为1044kJ·mol-1和1032kJ·mol-1;绝热条件下初始放热温度分别为429℃和293℃;自加速分解温度受反应系统到达最大反应速率的时间、物料存储规模及散热条件的影响,建议PAA应储存在通风背阴处且单个包装容积应控制在25L以下。     

基于CONE和MCC的典型电缆燃烧性能研究

采用锥形量热仪和微燃烧量热仪对四类不同护套材料的八种电缆样品进行燃烧性能分析,研究结果表明：电缆燃烧热释放过程不仅与护套、绝缘的材料密切相关,也与电缆结构密不可分;对于护套材料相同而大小或结构不同的电缆点燃时间和到达第一个峰值的时间以及第一个峰值最大热释放速率基本一致;聚烯烃无机阻燃材料电缆能够有效降低热释放速率峰值,CO2、CO释放量也明显低于橡胶电缆、普通PVC电缆和阻燃PVC电缆;微燃烧量热仪和锥形量热仪实验数据存在一定的相关性,微燃烧量热仪实验数据可以对电缆锥形量热仪实验的第一燃烧阶段燃烧行为进行预测。     

矿用钢丝绳芯阻燃胶带与坑木燃烧特性的实验研究

介绍了锥形量热仪的基本原理和测试方法,在辐射能量35kW/m2的条件下对煤矿井下使用的钢丝绳阻燃胶带和两种木材的燃烧特性进行了实验研究,得到了3种材料的燃烧特征参数。实验结果表明:在产生的CO、释放的热量、生成的烟雾量方面,落叶松均少于果松,因此,落叶松的火灾危害性较小。钢丝绳芯阻燃胶带在产生的CO、释放的热量、生成的烟雾等方面明显大于两种木材,其火灾危害性比远远大于木材,因此,对钢丝绳芯阻燃胶带火灾应给予足够的重视。     

硝酸及氯离子对高温硝酸铵水溶液热危险性的影响研究

国内外学者对硝酸铵的危险性进行了大量的研究,而对其水溶液的危险性至今开展不多。笔者采用差示扫描量热仪(DSC)及全自动反应量热仪(RC1e)对高温状态下的硝酸铵水溶液的热分解危险性、杂质离子对其稳定性的影响进行了研究。纯硝酸铵和90%硝酸铵水溶液的DSC实验表明,90%硝酸铵溶液和分析纯硝酸铵具有相似的热爆炸危险;90%硝酸铵水溶液在140~180℃之间的RC1e试验表明:硝酸或氯离子单独存在时,对硝酸铵分解都有不同程度的抑制作用,而同时存在时则大大降低体系的热稳定性。该结果对保障硝酸铵在生产、使用过程中的安全具有重要的参考价值。     

Numerical simulation of the thermal inertia of an adiabatic reaction calorimeter in reaction thermal safety process

Obtaining accurate thermal risk assessment parameters of chemical processes and substance properties is essential for improving the safety of chemical production and substance use and storage, and the adiabatic reaction calorimeter (ARC) has been employed by many researchers for this purpose. However, with the improvement and upgrading of the instrument, an examination of the factors that affect its detection accuracy is warranted. A simplified reaction model of the adiabatic thermal decomposition of tert-butyl peroxyacetate was constructed using computational fluid dynamics in which the adiabatic thermal decomposition kinetic model and fluid-solid coupling model were combined to simulate heat transfer. To verify the reliability of the parameters of the numerical calculation model, the effects of the sample cell's material, wall thickness, and mass were investigated in relation to the thermal inertia of the ARC. The results indicated that the thermal inertia of the system was lowest when the sample cell was composed of titanium. When the sample pool's composition is determined, the thermal inertia of the system can be reduced to a certain extent through an approximate increase in the sample mass. Finally, an analysis of the heat flow cloud diagram of the wall of sample pools made from different materials revealed that the thermal conductivity of titanium was high; this information can assist in controlling the adiabatic process.     

Reaction hazard and mechanism study of H2O2 oxidation of 2-butanol to methyl ethyl ketone using DSC,Phi-TEC II and GC-MS

Methyl ethyl ketone (MEK) oxidation via H₂O₂ with tungsten-based polyoxometalate catalysts has gained much attention with an ever-growing body of knowledge focusing on the development of environmentally benign processes in chemical industry. In this study, two calorimetry techniques, differential scanning calorimetry (DSC) and Phi-TEC II adiabatic calorimetry, were employed to analyze the thermal hazards associated with the 2-butanol oxidation reaction system. Hydrogen peroxide was the oxidant and a tungsten-based polyoxometalate as the catalyst. Gas chromatography-mass spectrometry was used for identification of the organic products. Important thermal kinetic data were obtained including “onset” temperature, heat of reaction, adiabatic temperature rise and self-heat rate. From DSC results, three exothermic peaks were detected with a total heat generation of approximately 1.26 kJ/g sufficiently to induce a thermal runaway. Possible reaction pathway for three stages were proposed based on both DSC and GC-MS results. One exotherm was detected by Phi-TEC II calorimeter and the pressure versus temperature profile together with the DSC and GC-MS data demonstrate the complexity of 2-butanol reaction system under both thermal screening and adiabatic conditions.     

紫外差示分光光光度法直接测定废水中苯胺

苯胺在不同酸度溶液中具有不同的结构和紫外吸收光谱.以苯胺的酸溶液为参比液,以等浓度的苯胺水溶液为测定液,在280nm处测定苯胺含量.结果表明,当苯胺浓度为1～100mg/L时,吸光度与浓度之间存在良好的线性关系,据此建立了紫外差示分光光度法.该法不需分离可直接测定工业废水中苯胺含量,简便快速,回收率高于96.7％.