横向风对浮力扩散火焰的振荡影响研究

火焰振荡频率是火灾科学研究领域的一个重要基本参数,对横向风下火焰振荡频率的研究可以为火灾图像探测的参数设置提供理论依据。针对浮力扩散火焰(0.6×10~(-5)弗洛德数Fr2×10~(-2),10~2理查德森数Ri10~5),本研究将横向风条件下火焰结构假设为倾斜的柱状,通过对燃烧产生的浮力和横向风产生的拖曳力进行动力学分析,得出横向风条件下火焰振荡频率表达公式。结合实验结果得出,火焰振荡频率的理论值和实验值均随拖曳系数的增大(即外界风速的增加)而增大,但实验值的上升趋势较理论值平缓.这是因为公式忽略了风速对火焰温度和系数K的影响。     

燃气加热炉火焰视频监控系统设计

为了持续监测燃气工业加热炉燃烧状况,保障锅炉运行安全,根据燃气火焰的特点,利用数字图像处理技术,设计了相应的燃气加热炉火焰视频监控系统。通过图像预处理、火焰特征提取、火焰特征分析三个步骤,可实现对炉膛火焰燃烧状态进行实时判定,包括火焰燃烧或熄灭、燃烧是否充分、是否稳定。仿真实验结果表明,该系统能准确地从监控视频中检测和识别火焰燃烧状态,并能将燃烧特征量和特征分析结果存储到数据库以供事后查询。     

芳纶在阻燃防护服中的应用及检测

本文介绍了间位芳纶和对位芳纶的性能,并对利用其性能制作的阻燃防护服进行了检测。     

芳纶1313纤维的特点及其在个体防护服装领域的应用

对芳纶1313纤维的发展历程、性能特点、生产加工、产品应用等各个方面进行了详细的阐述。芳纶1313纤维是一种性能优异的阻燃耐热纤维,在安全生产领域有着广阔的应用前景。自问世以来历经半个多世纪的发展,其在安全生产领域的应用价值已经得到广泛的认可。由于芳纶1313纤维具备一系列的突出优点,同时也存在某些缺陷,因此建议扬长避短,充分发挥这种纤维的种种优点,同时通过纤维改性、改进和优化生产工艺等方法,充分发挥其在安全生产领域的应用,使之产生应有的社会效益和经济效益。     

超高效液相色谱-串联质谱法测定污水中14种有机磷酸酯阻燃剂

建立了超高效液相色谱-串联质谱(UPLC-MS/MS)联用法同时测定污水中14种有机磷酸酯阻燃剂(OPEs)的分析方法.样品采集后,经GF/C膜过滤,HLB固相萃取小柱净化后进样分析.以BEH C18色谱柱为分离柱,乙腈和水混合液为流动相(0.2 mL min-1)梯度洗脱,15 min内可完成14种OPEs的分离.在电喷雾正离子模式下,采用多反应监测模式(MRM)进行质谱测定.在加标浓度为1.0μg·L-1时,14种OPEs在污水处理厂进水和出水中的回收率分别为52.1%—119%、43.6%—114%,相对标准偏差(RSD)分别为1.2%—16.2%、0.4%—9.2%,方法的检出限(LOD)在0.3—6.0 ng·L-1间.方法精密度好,准确度高,可满足同时对污水样品中的14种OPEs进行定性及定量分析的要求.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Determination of cobalt by air-assisted liquid–liquid microextraction

Abstract

A rapid and selective technique for extraction, preconcentration and determination of trace amounts of cobalt in water and pharmaceutical samples by air-assisted liquid–liquid microextraction combined with flame atomic absorption spectrometry is proposed. 1-Nitroso-2-naphthol is used as a complexing agent and 1-octanol as an extraction solvent. Parameters relevant for analytical effectivity, i.e. pH of sample solution, concentration of complexing agent, volume of extraction solvent, and number of extraction cycles are optimized using a Box–Behnken design. At optimum conditions, a dynamic linear range of 5–600?µg L^?1 is obtained, with a limit of detection of 1.2?µg L^?1. The method is used for determination of Co(II) in environmental water and pharmaceutical samples.     

Hazardous halogenated substances formed during combustion processes

The results of the emissions from combustion processes and/or from fire accidents show the risk to man and his environment and thus the need for strict legislation and critical analysis of unwanted compounds. These substances or their thermolysis products are often due to incomplete combustion or may result from the interaction of various substances.

In the following we report the formation of octachlorostyrene (OCS) and of high‐toxic substances such as polybrominated dioxins (PBrDD's), dibenzofurans (PBrDF's) by the combustion.

In order to determine a possible source of the non‐manufactured compound OCS, we conducted several model experiments in a combustion chamber at various temperatures from 400 °C to 800 °C. The thermolysis of chlorinated solvents like chloroform or of chlorinated aromatice like pentachlorobenzene produced—among other chlorinated substances—OCS as one of the major products.

Analogous combustion experiments with polyester plastics containing decabromodiphenylether as flame retardant and antimony trioxide as Synergist led to PBrDD's and PBrDF's. Here antimony trioxide seems to play an important role because in absence of this oxide, PBrDD's and PBrDF's were not found in our experimental conditions.     

溴代阻燃剂在土壤中的迁移转化研究进展

BFRs（溴代阻燃剂）是一种重要的持久性有机污染物,各种传统和新型的BFRs（PBDEs、TBBPA、DBDPE、BTBPE等）在全球环境中被广泛检出,其持久性、生物蓄积性以及对环境和人类健康的潜在毒性引起了人们的极大关注.在归纳和总结国内外关于BFRs在土壤中的迁移转化行为规律研究动态的基础上,重点讨论了吸附/解吸、光降解的机理和影响因素以及厌氧、好氧微生物降解和植物代谢的特点和降解途径.结果表明:吸附/解吸是BFRs在土壤中迁移转化的关键过程,土壤有机质含量和pH是影响其在土壤中迁移的主要影响因素.光解、微生物降解是BFRs在土壤中的主要转化途径,光解是表层土壤中BFRs的主要转化过程,逐步脱溴产生低溴化产物,溴化程度、土壤有机质和矿物质会直接影响其光解速率;厌氧脱溴和好氧微生物降解是BFRs在深层土壤中的主要降解过程,溴化程度与微生物降解密切相关.土壤中BFRs被植物吸收的过程中可能被代谢为低溴化产物,在食物链中积累,危害人体健康.尽管多年来在BFRs方面的研究取得了进展,但对这类污染物的环境行为和归趋的全面了解仍然很难,随着越来越多的新型BFRs被作为传统BFRs的替代品推向市场,建议对这些新兴替代化学品在土壤介质中的迁移转化过程,特别是生物降解进行更多的调查.      

温拌阻燃沥青混合料阻燃效果评价

通过氧指数、质量损失率及路用性能试验,研究EC130温拌剂、FRMAX型阻燃剂对沥青混合料阻燃效果的影响。试验结果显示,相比普通沥青混合料,阻燃沥青混合料、温拌阻燃沥青混合料氧指数分别增加23.3%、25.6%,质量损失率减小28.0%、32.0%,残留动稳定度增加14.0%、16.1%,残留最大弯拉应变增加14.1%、17.1%,冻融劈裂强度比增加5.3%、9.0%。相比普通沥青路面,阻燃沥青路面、温拌阻燃沥青路面发生火灾时能够减少34.0%、41.1%的毒害气体生成,并减少路面修补所需的混合料质量。其次得出普通沥青路面、阻燃沥青路面及温拌阻燃沥青路面的质量损失率、残留动稳定度、残留最大弯拉应变、残留冻融劈裂强度比与燃烧时间的关系模型。结果表明:阻燃剂对沥青混合料的阻燃效果显著;温拌剂有助于阻燃剂更好地发挥阻燃作用,降低火灾对道路的破坏,降低隧道火灾发生时有害气体的生成,提升隧道安全性。