Endpoint ‘floating leaves’ of <Emphasis Type="Italic">Potamogeton natans</Emphasis>: A new method to evaluate the development of macrophytes in pond mesocosms

Goal, Scope and Background One of the advantages of long-term mesocosm experiments as compared to short-term standard toxicity tests in the laboratory is the potential for detecting secondary effects due to the interaction of species and recovery with biomass of macrophytes being an important endpoint. However, generating biomass data by harvesting is often laborious, time-consuming, costly and restricted to the end of the experiment. Moreover, valuable information may get lost, in particular in single application studies, since maximal primary effects and secondary effects or recovery occur per se at different times. Potamogeton natans was used as an example in order to test whether number and area of floating leaves can be reliably measured and be used as intermediate and final endpoints in mesocosm effect studies. Methods Digital photos, which were taken of the water surface in the course of an indoor pond mesocosm study on herbicide effects, were subjected to image analysis. The results were compared to wet weight and ash-free dry weight of Potamogeton at the end of the herbicide study. Results and Discussion Both number and area of floating leaves indicated the same herbicide effects as wet weight and ash-free dry weight of Potamogeton. Error introduced by the different work steps is small and can be further minimised by a number of method improvements. Recommendations and Perspectives In indoor mesocosm studies, errors due to the perspective adjustment may be circumvented by taking the photos perpendicular to the water surface. Correction for lens aberration, identical light conditions and the use of fluorescence images are considered promising. Field applications are proposed.     

Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.     

我国废钢加工装备发展现状与展望

以绿色经济和循环经济的重大需求为背景,系统阐述了废钢加工装备的现状与发展,详细介绍了废钢加工装备的种类与用途,分析并总结了废钢加工装备的应用现状,指出了废钢加工装备以及废钢加工行业的发展方向。     

FCR多级接触氧化系统处理乳品工业废水的研究

为提高乳品工业废水生物处理的去污脱氮能力,以新型螺旋状纤维填料作为载体,采用多级氧化槽内不同种类微生物形成的食物链系统（food chain reactor）,详细考察了不同水力停留时间COD、TN、NH^＋₄-N、TP等的去除率及其去除机理,并对污泥减量化效果进行了初步探讨.结果表明,当进水COD为842～1 843 　mg/L、TN为36.3～92.2 　mg/L、NH^＋₄-N为30.1～52.1 　mg/L,HRT=6　h时,系统COD的平均去除率达到93.3%;TN和NH⁺₄-N的去除效果显著,其平均去除率分别达到73.3%和80.7%,出水COD、TN、NH⁺₄-N平均值分别为79.4　mg/L、9.6 　mg/L、6.1　mg/L,均低于《污水综合排放标准》（GB 8978-2002）的一级标准.该系统不仅具有较高的去污脱氮效果,而且产生的剩余污泥量极少,其污泥产率的平均值为7.7%.该系统运行费用低,操作管理方便,长期运行稳定,可应用于城市污水、中高浓度有机废水（如餐厅污水、食品工业废水）等的处理.     

某木材加工企业安全评价中的危险因素辨识

木材加工生产中危险有害因素较多,发生人员伤害事故的风险比较高. 用安全系统的理论和方法,以某木材加工企业生产过程为研究对象,通过危险有害因素辨识,对造成人员伤害的危险事件发生的可能性和导致伤害后果的严重程度进行了分析,为提出相应的安全对策措施提供了依据.     

复合污染状态下尾矿区有害化学品的迁移研究

用混合尾矿浆及尾矿渣淋溶柱,研究选矿药剂在尾矿渣及尾矿废水中的静态分布及其淋溶作用,结果表明:①选矿药剂对整个尾矿区都污染,即使是水溶性好的药剂,它们在尾矿渣中的静态分布也占有相当的比例,油溶性好的药剂多存在于尾矿渣中,尾矿污染为多种药剂的复合污染,各种药剂在尾矿渣及尾矿废水中的总浓度成倍加大;②用尾矿渣淋溶柱测得单一药剂的淋溶值:25号黑药>MIBC> CN->二号油>乙基黄药>丁基黄药>Y-89黄药.但多种药剂复合污染时,药剂的淋溶距离明显加大,其中CN-和Y-89黄药加大近一倍.复合药剂污染加大药剂的残留期,也加大它们向地下水及其它水源迁移的几率.     

肉类加工废水生物脱氮工艺的工程应用

采用ABRSBR组合工艺开展了大量现场模拟试验及动力学理论研究,最终获得了进一步提高肉类加工废水脱氮效率的措施途径。通过对已建成、正调试、正设计3种情况下肉类加工废水脱氮工艺的研究,表明此脱氮工艺具有良好的工程应用价值。     

图象法确定底泥颗粒物的表面分形维数(Ds)

研究了不同标度下底泥颗粒物的表面分形特征.结果表明,底泥颗粒的表面在几个nm到几个μm之间一般都具有多重分形特征,而且在不同的标度范围内表面分形维数(Ds)具有一定的差异,在100-102量级之间,随图象分辨率的增大,相应的Ds一般呈变小的趋势.SEM图象计算出的Ds为2.32-2.42,AFM图象计算出的Ds为2.00-2.46,它们是是纯粹几何意义上的表面粗糙特征的描述.     

豆制品加工废水处理工程设计分析

豆制品加工废水有机物和悬浮物浓度较高,水量及水质波动大,且容易发酸发臭。浙江某豆制品生产企业采用化学沉淀+SBR生化工艺对废水进行处理,出水水质达到《污水综合排放标准》GB8978-1996三级标准。该工艺操作简便,运行稳定,处理效率高,适合中小规模豆制品企业废水的处理。