不锈钢纤维毡改性材料的制备及在微生物燃料电池中的应用

为制备一种导电性高、生物相容性良好且耐腐蚀的阳极材料,提高微生物燃料电池(MFC)的产电性能,以不锈钢纤维毡(SSFF)为基底,采用水热反应法制备了还原氧化石墨烯/不锈钢纤维毡(RGO/SSFF),并进一步采用粉体烧结法将纳米二氧化钛(TiO₂)负载至RGO/SSFF,制备了二氧化钛/还原氧化石墨烯/不锈钢纤维毡(TiO₂/RGO/SSFF),将SSFF(对照)、RGO/SSFF和TiO₂/RGO/SSFF分别作为MFC的阳极(对应的MFC分别命名为MFC-CK、MFC-RG和MFC-TRG)以探究改性材料对MFC去除水体中耗氧有机物和产电性能的影响。结果表明：与SSFF相比,RGO/SSFF和TiO₂/RGO/SSFF具有更大的电容(Q为413.9 mF和446.9 mF),更小的界面转移电阻(R_ct为19.65 Ω和18.16 Ω),更高的交换电流密度(i₀为1.56×10⁻⁵ mA和2.07×10⁻⁴ mA);MFC-TRG对水体COD去除速率最高可达929.62 mg·(L·d)⁻¹;MFC-RG和MFC-TRG稳定输出电压分别为245 mV和280 mV,比MFC-CK提高了88.5%和115.4%;MFC-RG和MFC-TRG的功率密度输出分别为 337.50 mW·m⁻²和472.03 mW·m⁻²,比MFC-CK提高了163.9%和233.9%。由此可知,改性后的RGO/SSFF和TiO₂/RGO/SSFF阳极成功提高了MFC的产电性能。该研究结果可为后续MFC阳极改性研究提供参考。     

钢铁企业节水评价指标体系的构建

针对中国钢铁行业尚未建立节水评价指标体系的现状,在广泛查阅资料的基础上,遵循科学合理性、目标导向性、实用性和可比性的原则,构建了钢铁企业节水评价指标体系。指标体系的建立使钢铁企业的节水成效具有横向和纵向可比性,有利于调动企业的节水积极性,促进节水技术的发展和推广,为钢铁企业开展节水工作指明目标和方向。     

Pulmonary Functions of Welders in Gas Transmission Pipelines in Iran

This study evaluated the influence of welding on pulmonary functions in welders. Spirometry tests were performed before and after work shift in 91 welders and 25 clerks (control group). We examined forced vital capacity (FVC), forced expiratory volume in 1 s (FEV1), FEV1/FVC ratio and forced expiratory flow 25%-75% (FEF 25–75). Significant differences were found for FVC and FEV1/FVC between welders and the control group in pre- and post-shift measurements (p < .001). In welders, smoking and nonsmoking habit had no significant effects on any pulmonary indices before or after shift. Work experience and fume concentrations also had no significant effects on the majority of spirometric indices (p > .05). Most welders had at least 1 of the respiratory symptoms. Significant differences were found between pre- and post-shift indices (as percentage of predicted values calculated with spirometer) and between the welders engaged in some welding tasks and the control group before work shift. This study documented work-related changes in pulmonary functions in the welders and marked drops in these functions without symptoms in some welders.     

钢桁架-钢筋混凝土管柱结构风参数试验研究

结构下部空旷,上部挡风墙承担的风荷载对结构下部产生较大作用。我国规范没有对该类结构及其顶部透气性A型架的风参数作具体规定。为解决工程设计中风参数取值问题,进行了刚性模型风洞试验研究,得到了不同工况下挡风墙、A型架、管柱的体型系数及挡风墙的阵风系数,分析了风机、周围建筑物、风向角对相关风参数的影响,给出了相关参数的建议值。并将试验结果与数值模拟计算结果进行了对比分析,结果表明,二者吻合较好,研究结果为工程设计提供了基础资料,可供同类工程参考。     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

钢铁行业节能技术潜力与成本分析—以长三角地区为例

钢铁行业是能源消耗和碳排放的重点行业,节能减排是钢铁行业绿色低碳转型发展的有效途径,节能技术是钢铁行业提高能源效率、降低碳排放和减少空气污染的关键。运用节能供给曲线方法对长三角地区钢铁行业技术节能成本进行评价,并对2030年长三角地区钢铁行业技术节能潜力进行评估。结果表明：钢铁行业28项技术在2030年预计为长三角地区累计节能875.74 PJ,约为2020年长三角地区钢铁行业总能耗的34%;考虑不同收益项时的技术节能成本存在差异,当不考虑任何收益时技术的节能成本最高,当将协同效益纳入考虑后,技术的节能成本降到较低水平;贴现率、温室气体或污染物交易价格等因素会对技术的节能成本产生影响,贴现率越高意味着资金成本越高,技术的节能成本也相应越高;温室气体或污染物价格上升会增加技术节能的收益,从而降低技术的节能成本。

     

连续式磁性颗粒去除器在轧钢废水处理中的应用

连续式磁性颗粒去除器，是利用稀土永磁Ｎｄ－Ｆｅ－Ｂ为材质，处理含磁性颗粒废水的装置，其主要结构由动力传递，磁块组合体，磁条移动，设备本体，进出口流道及分离部件等组成，该文阐述了永磁分离机理，并通过磁性悬浮颗粒的理论驱进速度和最小捕获粒径的求解，探讨了提高砒生粒去除器捕 方法，实践证明，该装置用于冶金轧钢废水处理中，能代替传统的轧钢废水三级处理工艺，节约投资成本７０％，占地减少８５％，运行费用亦大幅     

锈蚀钢结构连接节点抗震性能研究进展

基于材料与连接构件层面,总结了近年来国内外既有试验研究及理论分析成果,主要包括腐蚀后的标准试件的单调拉伸、滞回性能退化分析,以及梁柱节点、框架结构的抗震性能研究,并给出了相应的力学性能退化模型,通过进行总结及对比分析后,为复杂环境下工程钢结构给出研究方向,同时也对我国工程结构的设计方法提供理论指导和参考依据。     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

钢在自然环境中的大气腐蚀研究进展

回顾了近年来钢在自然环境中的大气暴露腐蚀试验和腐蚀行为预测的研究。重点介绍了钢的腐蚀失重规律、环境因素和钢的化学成分对钢的大气腐蚀影响以及锈层分析的研究;此外,还介绍了幂函数预测模型、灰色模型和神经网络预测模型的研究进展。