我国典型钢铁工业城市夏季臭氧污染来源解析研究

邯郸与其周边城市相比,臭氧(O3)污染最为严重.基于观测数据分析夏季邯郸O3浓度的时空特征,结果显示:观测期间邯郸O3超标天数比率为86.7％,各区县O3浓度分布存在差异,高温、低湿和偏南贴地气团传输是此次O3连续污染的主要成因.继而,以CAMx-OSAT模型模拟方法进行O3来源解析,溯源分析显示:邯郸O3污染具有明显...     

武钢循环冷却水钢管腐蚀的原因及其对策

针对武钢循环冷却水系统部分钢管腐蚀,造成管管漏水,严重影响正常生产的问题.探讨了钢管产生腐蚀的原因及其对策.近2年,通过实施减缓循环冷却水钢管腐蚀的对策,取得了明显的效果.     

紫下大桥安全检测与评价方法研究

钢桥因具有跨径大、承载能力强、施工工期短等特点,被世界各国广泛采用,但在使用过程中,由于重载甚至超载车辆的反复作用、自然灾害的侵袭及交通事故等人为因素的作用,经常造成桥梁损伤和局部破坏,导致桥梁承载能力和耐久性的降低,甚至影响到运营的安全。本文建立了钢拱桥的健康检测和安全评价方法,采用防腐涂层厚度测定、结合强度测定、无损探伤和动静载荷试验等手段对紫下大桥健康状况进行了检测,采用不确定层次分析法对大桥进行了安全评价,提出了处理意见和措施,为既有钢拱桥的健康检测、评价和维护积累了有益的资料。     

电焊熔珠对棉布和聚氨酯泡沫的引燃能力研究

研究了加载电压对电焊熔珠数目和粒径分布的影响,在模拟装置上实验了电焊对棉布、聚氨酯泡沫和纸张的引燃性能.结果表明,随着加载电压升高,电焊熔珠的数目逐渐减少,熔珠粒径逐渐增大,引燃能力逐渐增强.固体材料性质对电焊熔珠引燃能力也有很大影响,表面粗糙,易蓄热材料容易被点燃.电焊熔珠引燃棉布、聚氨酯泡沫和纸张的临界电压为37.5V、40V和45V.     

钢铁企业开放空间煤气扩散规律研究

研究目的是探索钢铁企业开放空间煤气泄漏的扩散规律和影响范围。采用matlab模拟煤气泄漏后CO的浓度分布和扩散距离规律。通过建立煤气泄漏扩散数学模型,对其影响煤气气扩散的主要因素进行了分析、探讨了煤气毒性范围的划分,并以某钢铁企业为实例进行数值模拟和计算。模拟结果显示,大气稳定度、风速对煤气泄漏扩散的浓度影响起着非常重要的作用。大气稳定度和风速会显著改变有害气体的扩散状态。在风速和泄漏增大时,煤气在开放空间扩散距离大,影响范围广,应合理布置煤气监控点,预防煤气中毒。     

Treatment of tannery wastewater by electrocoagulation

Treatment of tannery wastewater by electrocoagulation with low cell current(≤1A)and soluble electrodes(mild steel electrodes and aluminum electrodes)was studied.Compared with aluminum electrodes,mild steel electrodes were more effective for the removal of sulfide,with a removal efficiency of over 90%.But during the treatment process,black color precipitate typical to iron(Ⅱ)sulfides was produced.While aluminum electrodes were effective to eliminate the colority of the effluent,the removal efficiency of sulfide was lower than 12%.The mechanisms of the removal of chemical oxygen demand,ammonia,total organic carbon,sulfide and colority with the two soluble electrodes(mild steel and aluminum electrodes)were discussed in detail.In order to exert the predominance of diffenent types of electrodes,the tannery wastewater was treated using mild steel electrodes first followed by the filter and finally by the aluminum electrodes,the elimination rates of chemical oxygen demand,ammonia,total organic carbon,sulfide and colority were 68.0%,43.1%,55.1%,96.7% and 84.3%,respectively,with the initial concentrations 2413.1 mg/L,223.4 mg/L,1000.4 mg/L,112.3 mg/L and 256 dilution times,respectively.The absorbance spectra and energy consumption during electrocoagulation process were also discussed.     

Corrosion and polarization behavior of carbon steel in MEA-based CO2 capture process

This work reveals levels of corrosion rate and polarization behavior of carbon steel immersed in aqueous solutions of monoethanolamine (MEA) used in the absorption-based carbon dioxide (CO₂) capture process for greenhouse gas reduction from industrial flue gas streams. Such information was obtained from electrochemical-based corrosion experiments under a wide range of the CO₂ capture process conditions. The corrosion of carbon steel was evaluated in respect to process parameters including partial pressure of oxygen (O₂), CO₂ loading in solution, solution velocity, solution temperature, MEA concentration and metal surface condition. Results show that the aqueous MEA solution containing CO₂ provides a favorable condition for the corrosion of carbon steel to proceed. Corrosion rate is increased by all tested process parameters. These parametric effects were explained by the electrochemical kinetic data obtained from polarization curves and by the thermodynamic data obtained from Pourbaix diagram.     

膜法脱盐技术在钢铁企业污水回用中的应用分析

钢铁企业综合污水处理厂的出水脱盐处理回用具有重要意义,本文对国内一些钢铁企业采用的膜法脱盐技术的优缺点进行了分析,并提出了改进方案。     

钢铁厂废酸对印染前处理废水的混凝沉淀实验

棉纺织印染前处理废水水质成分复杂,污染物含量极高,是印染厂污水处理难以达标的重要原因。实验针对常州某印染厂棉纺织印染前处理车间废水水质特性,选取钢铁厂废酸作为混凝剂对棉纺织印染前处理废水进行了混凝试验研究。得出废酸的最佳投加量为30mL/L;混凝最佳搅拌方式为：以300rpm速度快速搅拌2min,以40rpm搅拌10min;助凝剂阳离子型聚丙烯酰胺（CPAM）以投加4mg/L为宜;最佳沉淀时间为20min。     

油气输送焊管残余应力测试与安全评价方法研究

针对油气输送焊管残余应力测试与评估技术难题,采用机械切割应力释放法对不同成型工艺和状态焊管的残余应力进行了测试分析对比,结果表明:UOE焊管的残余应力分布水平较低;ERW焊管次之;SSAW焊管的残余应力分布范围较广,有高有低。不同管型和成型工艺及水压试验状态具有明显不同的残余应力分布特征,在进行焊管安全评价时必须区别对待。根据残余应力实测结果提出了焊管安全评价时残余应力的取值建议。研究结果对管道设计、安全分析与评价、焊管残余应力的改善、控制及焊管合理选用具有重要工程意义。