钢渣热焖技术分析与应用实践

综合分析了珠海中冶环保建筑材料有限公司50万t/a钢渣生产线所采用的熔融钢渣辊压-有压自解技术的特点,及其在2014年的主要技术和经济指标。结果表明,熔融钢渣辊压-有压热闷自解处理技术具有适应性强、处理时间短、尾渣稳定性好等特点,是实现钢渣高价值资源化利用的新技术,具有广阔的发展前景。     

钢管混凝土柱温度场简化计算方法

钢管混凝土柱是建筑承重结构的重要组成部分,其耐火极限研究尤为重要。温度场计算作为抗火研究的基础,在保证精确度的前提下要做到简单实用,为高效的抗火设计提供有利条件。通过有限元软件ABAQUS模拟构件温度场,分析80种不同工况下圆、方形构件温度场分布特点,并考虑钢管厚度、截面尺寸等因素,提出了钢管及混凝土温度简化计算公式。通过试验数据、模拟数据对公式进行调校验证,结果表明计算精度满足工程设计要求。     

钢铁行业不同二氧化碳排放核算方法比较及实例分析

系统梳理了政府间气候专门委员会(IPCC)及我国国家和地方层面(上海市、天津市)的钢铁行业碳核算方法,分析了方法特点、核算边界及排放因子的选择,并进行了实例分析。结果表明,IPCC核算方法较其他3种核算方法差异较大,而国家和地方层面方法学相差不大。IPCC核算方法主要用于国家层面温室气体排放清单计算,给出的排放因子具有全球普适性,但针对性和精确性较差;其他3种核算方法均为开展碳排放权交易服务,核算方法与核算边界相似,但对于排放因子与工业生产过程计算,因考虑到方法学的普适性,国家方法学较为全面,两地方方法学则更多考虑到当地钢铁行业的特点,碳核算具有区域特色,针对性较强。碳排放因子的选取是钢铁行业碳核算的重要影响因素,建议进一步细化碳排放因子,提高核算精确度。     

Refining mercury emission estimations to the atmosphere from iron and steel production

正Due to its long-range transport in the atmosphere,mercury is a pollutant of global concern with health risks to humans and ecosystems worldwide(Li et al.,2012;Lindqvist et al.,1991;Liu et al.,2012a;Tang et al.,2016;Wang et al.,2015;Shao et al.,2016).Atmospheric mercury,mainly from emission from various natural and anthropogenic sources and     

我国钢铁工业一次颗粒物排放量估算

针对我国钢铁工业生产工艺以及颗粒物控制技术的分类,建立了一个细化到排放节点的自下而上的颗粒物排放模型.结合我国钢铁工业各地区活动水平以及颗粒物控制技术分布的历史变化趋势分析,利用此模型计算了2006—2012年我国钢铁工业一次颗粒物的排放系数和排放量.模型计算结果显示,2006年以来,我国钢铁工业颗粒物控制水平不断提高,PM_(2.5)、PM_(2.5)~10和PM10的排放系数分别降低了21.2%、19.3%和19.0%.钢铁工业一次颗粒物排放量在2006—2011年间持续增长,2011年TSP排放量为602×104t,PM10排放量为200×104t,PM_(2.5)排放量为124×104t;2012年排放量出现下降,TSP排放量为561×104t,PM10排放量为187×104t,PM_(2.5)排放量为116×104t.2012年我国钢铁工业一次PM_(2.5)排放量中的有组织排放占39.5%,无组织排放占60.5%;除加严有组织源管控之外,减少颗粒物无组织排放,对于钢铁工业颗粒物排放控制也非常重要.我国钢铁工业颗粒物排放量分布不均衡,河北、山东、江苏、辽宁、山西5个省的排放超过全国总排放的50%.     

钢铁行业烧结烟气脱硫技术现状和发展趋势

钢铁行业烧结过程产生的二氧化硫占钢铁企业产生二氧化硫总量的一半以上,理应作为钢铁企业二氧化硫控制的重点。我国已建设多个烧结脱硫示范工程,并取得了良好的脱硫效果。在分析烧结烟气特点前提下,阐述了目前国内采用的几种脱硫工艺的优缺点,比较了密相干塔烟气脱硫、石灰乳脱硫、石灰石-石膏法脱硫、氨法脱硫、循环流化床脱硫、活性炭脱硫、双碱法脱硫等方法的优点与缺点,为烧结烟气脱硫技术选择提供了参考。     

Double-electrode arc welding process: Principle,variants, control and developments

Double-electrode gas metal arc welding (DE-GMAW) is a novel welding process in which a second electrode, non-consumable or consumable, is added to bypass part of the wire current. The bypass current reduces the heat input in non-consumable DE-GMAW or increases the deposition rate in consumable DE-GMAW. The fixed correlation of the heat input with the deposition in conventional GMAW and its variants is thus changed and becomes controllable. At the University of Kentucky, DE-GMAW has been tested/developed by adding a plasma arc welding torch, a GTAW (gas tungsten arc welding) torch, a pair of GTAW torches, and a GMAW torch. Steels and aluminum alloys are welded and the system is powered by one or multiple power supplies with appropriate control methods. The metal transfer has been studied at the University of Kentucky and Shandong University resulting in the desirable spray transfer be obtained with less than 100 A base current for 1.2 mm diameter steel wire. At Lanzhou University of Technology, pulsed DE-GMAW has been successfully developed to join aluminum/magnesium to steel. At the Adaptive Intelligent Systems LLC, DE-GMAW principle has been applied to the submerged arc welding (SAW) and the embedded control systems needed for industrial applications have been developed. The DE-SAW resulted in 1/3 reduction in heat input for a shipbuilding application and the weld penetration depth was successfully feedback controlled. In addition, the bypass concept is extended to the GTAW resulting in the arcing-wire GTAW which adds a second arc established between the tungsten and filler to the existing gas tungsten arc. The DE-GMAW is extended to double-electrode arc welding (DE-AW) where the main electrode may not necessarily to be consumable. Recently, the Beijing University of Technology systematically studied the metal transfer in the arcing-wire GTAW and found that the desired metal transfer modes may always be obtained from the given wire feed speed by adjusting the wire current and wire position/orientation appropriately. A variety of DE-AW processes are thus available to suit for different applications, using existing arc welding equipment.     

高峰矿提升机用钢丝绳无损检测方法的研究

介绍了利用漏磁场原理检测钢丝绳断丝 ,磁桥回路测量钢丝绳磨损信号 ,并实现在一个传感器中对上述多种缺陷的综合检测。在信号处理方面 ,结合不同信号特征 ,设计了相应的电路和处理软件 ,实现了缺陷的定量检测     

Quantitative sustainability assessment of remanufacturing waste reinforcing steel

Construction is a major contributor to the solid waste stream globally and various recycling strategies are being evaluated to recover valuable resources. As a novel strategy, remanufacturing waste reinforcing steel bar (rebar) pieces from concrete waste to produce nails was applied on an industrial scale to prove the technical feasibility, where a group of alternatives were developed based on commercially available industrial machinery. The calculated economic and environmental feasibility values are sufficiently high for industrial application, and the most appropriate remanufacturing technological alternative was identified. The sustainability equation was solved to find the social feasibility and overall remanufacturing sustainability index. Rebar waste remanufacturing has a high triple-bottom-line sustainability index of 0.885. Based on the proposed process, small remanufacturing companies can be developed, thereby aiding employment and human development by earning profit of 1904–8880 USD/day. The findings of this study are beneficial to decision makers in government and industry and are globally relevant because concrete waste is ubiquitous worldwide.     

一种特殊电除尘器钢支架计算方法的讨论

以某工程为例,介绍了一种特殊电除尘器钢支架的结构形式,通过结构设计软件计算和有限元整体屈曲分析,证明采用传统的计算长度系数法进行立柱稳定计算,其结果偏不安全,建议采用整体屈曲分析计算.