Community structure and elevational diversity patterns of soil Acidobacteria

Acidobacteria is one of the most dominant and abundant phyla in soil,and was believed to have a wide range of metabolic and genetic functions. Relatively little is known about its community structure and elevational diversity patterns. We selected four elevation gradients from 1000 to 2800 m with typical vegetation types of the northern slope of Shennongjia Mountain in central China. The vegetation types were evergreen broadleaved forest,deciduous broadleaved forest,coniferous forest and sub-alpine shrubs. We analyzed the soil acidobacterial community composition,elevational patterns and the relationship between Acidobacteria subdivisions and soil enzyme activities by using the 16 S rRNA meta-sequencing technique and multivariate statistical analysis. The result found that 19 known subdivisions as well as an unclassified phylotype were presented in these forest sites,and Subdivision 6 has the highest number of detectable operational taxonomic units(OTUs). A significant single peak distribution pattern(P 0.05) between the OTU number and the elevation was observed. The Jaccard and Bray–Curtis index analysis showed that the soil Acidobacteria compositional similarity significantly decreased(P 0.01) with the increase in elevation distance. Mantel test analysis showed the most of the soil Acidobacteria subdivisions had the significant relationship(P 0.01) with different soil enzymes. Therefore,soil Acidobacteria may be involved in different ecosystem functions in global elemental cycles. Partial Mantel tests and CCA analysis showed that soil pH,soil temperature and plant diversity may be the key factors in shaping the soil Acidobacterial community structure.     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.     

储油罐区防火堤受力情况分析

利用ANSYS有限元分析软件,对防火堤受液态物质冲击时受力状况进行模拟,并对防火堤在冲击载荷下的受力情况进行了分析,指出防火堤在事故状态下的脆弱部分,对油库的安全设计、评价和日常维护具有参考价值。     

基于功能仿真的电子产品性能退化分析方法

目的研究基于功能仿真对电子产品长期工作过程中性能退化问题进行分析的方法。方法以DC-DC电源模块为对象,一种方式是直接对电源模块进行加速退化试验,并基于试验数据进行可靠性分析;另一种方式是对电源模块中性能退化关键元器件进行加速退化试验,并将试验数据模型注入到电源模块功能仿真模型中,进行性能退化仿真与可靠性分析,最终对两种分析结果进行对比,验证仿真分析技术的有效性。结果对比显示,加速退化试验分析得到的电源模块平均寿命为281 560 h,仿真分析得到的电源模块平均寿命为357 290 h。结论由于仿真分析方法只考虑了性能退化的关键元器件,结果偏乐观,但是偏差在合理的范围内,证明该方法对于性能退化可靠性分析是有效的,并且应用该方法更便于进行设计改进和迭代分析。     

L形和U形三维钝体结构绕流的数值模拟研究

采用大涡模型对L形和U形三维钝体建筑物的绕流特性和风压分布特性进行数值研究.考虑平均和脉动速度入口边界,在雷诺数为1.5×105～7×105条件下,对2种钝体的9种分析工况进行瞬态动力分析,并将计算结果与已有研究进行对比.研究表明,钝体绕流对周围流场影响的强弱程度依次为尾流区、屋顶区、来流区,影响大小随着流场与钝体之间...     

火源位置对L型管廊电缆火灾影响规律的数值模拟研究

选取某城市L型综合管廊电缆舱为研究对象,采用FDS数值模拟软件研究了不同火源位置对L型管廊电缆火灾温度纵向衰减规律、烟气浓度分布规律及烟气危害性的影响。研究结果表明,L型廊道构型影响了不同火源位置的管廊电缆火灾最高温度纵向衰减的连续性,基于热边界层理论提出了适用于L型管廊的二维平面最高温度纵向衰减模型。基于峰宽时间计算了L型管廊火灾的烟气总危害性参数,不同火源位置的烟气危害性总在靠近管廊节点位置处最低。这些结果可对综合管廊的消防设计与火灾防控提供参考。     

燃气爆炸作用下房屋裂缝开展的分形模拟

烯气爆炸灾害下房屋裂纹开展有的模式与受均布压力破坏时的相同,在参照实验所得混凝土裂缝的分形维数资源的基础上编制了相应的软件,利用分形插值的方法实现裂缝开展的模拟,模拟结果较好地反映了裂缝发展的真实情况,且较以往的模拟方法节约了大量存储空间。     

迎接地震观测技术的新变革

回顾了地震观测技术发展的三个阶段及其特点。简要总结了随着这几个阶段的技术进步南京基准地震台观测技术的重要变革 ,并从记录地震事件数量、大地震速报作用和推动某些研究的深入等方面评估了由于这些技术进步所带来的地震台效能的提高。对目前地震观测技术从模拟观测向数字观测的转折时期 ,地震台如何尽快过渡 ,充分发挥效能提出了初步对策。     

雷达关键部件对西北地区典型环境适应性的综合仿真研究

长期工作在西北地区大温差、多风砂和强紫外线等恶劣复杂环境下的雷达装备表面极易出现表面磨蚀或损坏。建立了雷达对西北地区综合环境适应性的仿真分析方法,以计算流体动力学(CFD)软件FLUENT为平台,对雷达典型部件在大温差、多风砂和强紫外线环境中的表面状态进行仿真模拟。仿真结果与雷达装备实际情况较为吻合,为进一步深入研究相关物理机理以及设计防护措施提供了理论依据。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.