Scenario derivation and consequence evaluation of dust explosion accident based on dynamic Bayesian network

In order to clarify the correlation between the evolution path of dust explosion accidents and emergency decision-making, and to accurately predict the disaster damage levels of various disaster bearing bodies. This paper extracts 56 key scenario elements from four aspects, namely state, answer, goal and environment, based on the analysis of typical dust explosion accident cases. At the same time, a general scenario evolution path of dust explosion accident is constructed. Using fuzzy number set theory and dynamic Bayes joint probability model, the accurate solution of scenario state probability was realized. With the help of accident cases and dynamic Bayes approach, the dust explosion consequence prediction index system and evaluation criteria were constructed, covering factors such as dust explosion intensity, casualties, direct economic losses, equipment damage, building damage, environmental damage and other factors. A polyethylene wax dust explosion accident in a city of China was used to verify the dust explosion accident scenario evolution model and consequences prediction model. The predicted results were in good agreement with the actual damage of various carriers of the accident, which indicated that the model could be used for dust explosion accident prediction and disaster loss prediction. The research results provided reference and technical support for the prediction of dust explosion accident evolution direction, emergency aid measures decision and deployment, disaster damage prediction and evaluation.     

Smoldering combustion of dust layer on hot surface

The critical temperature as well as the critical flux for ignition of a dust layer of cornflour and a mixture of wheatflour and cornflour (80% wheatflour+20% cornflour) on a hot plate have been determined. The moulded sample was cylindrical in shape and of different heights and diameters. The particle size of dusts ranged between 63 μm to 150 μm. The temperature–time histories for self-heating without ignition and with ignition are offered, showing the critical boundaries between them. Also the times to ignition for each dust, showing the effect of sample size on their values, are determined. Certain experimental correlations which relate to times to ignition, as well as the critical temperature for ignition and thermal and geometrical dimensions of sample are presented.     

Collecting representative dust samples: A comparison of various sampling methods in underground coal mines

Former methods used in the U.S. to assess hazardous and explosible coal dust date back to the 1950s. As mining technologies advanced, so too have the hazards. Given the results of the recent coal dust particle size survey and full-scale experimental mine explosion tests, the National Institute for Occupational Safety and Health (NIOSH) recommended a new minimum standard, in the absence of background methane, of 80% total incombustible content (TIC) be required in the intake airways of bituminous coal mines, replacing the previous 65% TIC requirement. Most important to monitoring and maintaining the 80% TIC is the ability to effectively collect and analyze representative dust samples that would likely disperse and participate in dust explosion propagation. Research has shown that dust suspended on elevated surfaces is usually finer, more reactive, and more readily dispersible while floor deposits of dust are generally coarser and more difficult to disperse given the same blast of air. The roof, rib, and floor portions of the dust samples were collected and analyzed for incombustible content separately and the results were compared to a band sample of the roof, rib, and floor components. Results indicate that the roof and rib dust samples should be kept separate from floor dust samples and considered individually for analyses. The various experimental collection methods are detailed along with preferred sampling approaches that improve the detectability of potentially hazardous accumulations of explosible dust.     

Flame propagation in lycopodium/air mixtures below atmospheric pressure

Industrial processes are often operated at conditions deviating from atmospheric conditions. Safety relevant parameters normally used for hazard evaluation and classification of combustible dusts are only valid within a very narrow range of pressure, temperature and gas composition. The development of dust explosions and flame propagation under reduced pressure conditions is poorly investigated. Standard laboratory equipment like the 20 l Siwek chamber does not allow investigations at very low pressures. Therefore an experimental device was developed for the investigations on flame propagation and ignition under reduced pressure conditions. Flame propagation was analysed by a video analysis system the actual flame speed was measured by optical sensors. Experiments were carried out with lycopodium at dust concentrations of 100 g/m³, 200 g/m³ and 300 g/m³. It was found that both flame shapes and flame speeds were quite different from those obtained at atmospheric pressure. Effects like buoyancy of hot gases during ignition and flame propagation are less strong than at atmospheric conditions. For the investigated dust concentrations the flame reaches speeds that are nearly an order of a magnitude higher than at ambient conditions.     

Evaluating the overall efficiency of a flameless venting device for dust explosions

Results from cornstarch explosion tests using a flameless venting device (mounted over a burst disc) on an 8 m³ vessel are presented and used to determine the overall efficiency of the device, which is defined as the ratio between its effective vent area and the nominal vent area. Because these devices are comprised of an arrestor element mounted over an impulsively-actuated venting device (such as a burst disc), the functional form of the overall efficiency is taken as the product of the area efficiency (i.e., the ratio between the effective vent area of the entire assembly to that of the venting device without the arrestor element) and the burst efficiency (i.e., the ratio of the effective vent area of the venting device without the arrestor element to the nominal vent area). The effective vent areas are calculated from measured overpressures using three different empirical correlations (FM Global 2001, NFPA 2007, and VDI 2002). Furthermore, due to significant variations in the effective reactivity from test to test, a correction factor proportional to the initial flame speed is applied when determining the area efficiency. In general, it was found that the FM Global and NFPA methodologies yield consistent results with less scatter than VDI 3673.     

Effect of admixture of solid inertant on fire hazard of dust layers oriented at varying degrees of inclination

Unlike metallic dust layers, the layer flammability levels (LFL) of non-metallic dust layers exhibit a wide range from Class 1 (No self-sustained combustion) to Class 6 (explosive combustion). However, determinations of layer flammability have not considered the effect of inclination angle, thereby potentially underestimating fire hazard of combustible dust layers in many industrial situations. In this research, inclined dust layers showed greater fire hazard than did horizontally oriented dust layers. For example, LFL of wood dust jumped from class 3 to class 5 when layers were positioned with an incline. Flame spread rate of PMMA dust layers increased from 1.8 to 3.6 mm/s when the angle of inclination increased from 0 to 40°. Even small amounts of solid inertant significantly decreased surface layer fires. The required amount of inertant to completely inert layer fires was far less than that for smoldering layer fires or dust explosions.     

基于CFD-DEM的旋风除尘器内气固流动特性研究

为了研究旋风除尘器内气固流动特性,采用CFD-DEM耦合算法研究不同入口气体速度下旋风除尘器内颗粒流态、静压、径向速度及轴向速度分布特征。结果表明:煤屑颗粒在离心力和径向曳力的作用下以螺旋颗粒条带靠近除尘器的壁面稳定向下移动,随着入口风速的增加煤屑颗粒条带变宽,条带与除尘器的第1次接触的拐点上移,螺距减小;除尘器内部压力轴向变化较小,径向变化较大,随着入口气体速度增加,除尘器壁面附近高压区范围和压力也随之增加,除尘器上方和下方的负压区变宽并朝轴向方向延伸;随入口气体速度增加,除尘器内径向速度和轴向速度逐渐增加,煤屑颗粒在除尘器中部聚集较多,煤屑停留时间变长,入口气体速度为15 m/s时,煤屑颗粒在除尘器内停留时间最长。     

Law of variation for low density polyethylene dust explosion with different inert gases

To reveal the effects of different inert gases on explosion characteristics during low density polyethylene (LDPE) dust explosion and optimize the explosion-proof process, eight N₂ (CO₂)/air mixed inerting conditions were experimentally studied. Typical inerting conditions with 12 L cylindrical explosive tank were used to study the characteristics on the flame propagation. The thermogravimetric analysis with related theories were used to further explain the mechanism and quantities in low density polyethylene (LDPE) dust explosion with different inert gases. The results showed that the reduction of O₂ concentration could effectively delay the progress of flame growth process and weaken the effect of dust combustion reaction. The flame growth process of condition (N₂/air (18% O₂)) was 2.05 times slower than that of the non-inert condition. The explosion strength was obviously reduced, and the characteristic parameters such as explosion pressure and flame propagation speed were also affected by the decrease of O₂ concentration. For LDPE powder, the smaller the median diameter, the greater the explosion intensity and the lower the limiting oxygen content (LOC). The LOC with CO₂ was usually higher than that with N₂ and the effect of CO₂ was significantly better than N₂ in inerting.     

Ignition temperatures of dust layers and bulk storages in hot environments

In many industrial installations, particulate solids (cereals, agri-food products, coal, plants, etc.) are stored or processed. Self-heating of these products, which can lead to fires and explosions, can occur in a variety of situations. Examples include large storage at room temperature, formation of a layer on a hot surface, layer deposited on a surface – insulating or conductive – in a hot environment or even storage of product exposed to heating on one side.The main parameters that determine the occurrence of self-heating are the size of the container, the temperature, the residence time and the characteristics of the product. Depending on the type of situation encountered and these implementation conditions, the analysis of self-heating risks must be based on specific models and/or parameters.This paper presents the different variants and combinations of the theoretical model from the theory of thermal runaway to represent self-heating, taking into account in particular the symmetry or asymmetry of heating, reagent consumption and boundary conditions. It also discusses their adaptation to the previous identified industrial situations.Nine products were chosen to be representative of those used in the different considered industrial situations. They were subjected to self-heating basket tests in isothermal ovens in order to determine the parameters for applying the described theoretical models. These results were compared with the results of self-heating tests in layers of different thicknesses in a hot environment, on an insulating or conductive plate, using a specially developed test protocol, as well as with the results of standardized tests of minimum ignition temperature in 5 mm layers.This led to the proposal of the most appropriate theoretical model to represent the self-heating phenomenon for each of the four identified industrial situations.This analysis can promote better design of industrial equipment and production conditions (temperatures, volumes or product flows …) in order to prevent fires and explosions.     

静电除尘在球团竖炉烟尘治理上的应用

介绍了球团竖炉烟尘治理的改造经验,总结了电除尘工程概况及效果。