燃煤电厂的除尘、脱硫、脱硝技术

综述了国内外燃煤电厂除尘、脱硫、脱硝技术与设备,及其我国的发展趋势。     

Particulate air pollution in Lanzhou China

Concentrations of total suspended particles (TSP) and PM(10) in Lanzhou China have been kept high for the past two decades. Data collected during the intensive observational period from October 1999 to April 2001 show high TSP and PM(10) concentrations. Starting from November, the PM(10) pollution intensifies, and reaches mid to high alert level of air pollution, continues until April next year, and is at low alert level in the summer. In the winter and spring, the TSP concentration is 2-10 times higher than the third-level criterion of air quality (severe pollution). Effects of intrinsic factors (sources of pollution) and remote preconditions (propagation of dust storms) for severe PM(10) and TSP pollution in Lanzhou are analyzed.     

Characterization and acid-mobilization study for typical iron-bearing clay mineral

In this study, iron speciation in five standard clay samples was characterized. Iron mobilization from these clays was then measured in acidic media. For comparison, a commercially available Arizona test dust (ATD) was also observed. The results showed that the free-Fe contents of clays were commonly lower than that of dust aerosols. The components of clays were dominant by the structural Fe held in the aluminosilicate lattice. The iron solubility of the clays were in the order of KGa-2?>?SWy-2?>?CCa-2?>?IMt-2?>?NAu-2. Based upon the Mössbauer spectrum and transmission electron microscopy (TEM) analysis, the Fe(II) fraction and the Fe/Si ratio of clay particles changed after dissolution, suggesting the total Fe solubility depended on the Fe atom states existing within the aluminosilicate lattice. The Fe in KGa-2 and SWy-2 was most likely substituted for alkaline elements as the interlayer ions held by ionic bonds in the aluminosilicate, which are more liable to dissolution. However, the Fe in NAu-2 was more likely to be bound by strong covalent bonds in aluminosilicate mineral, which is less soluble. The much highly soluble Fe in ATD was not only linked to the dissolution of an appreciable fraction of Fe(II), but also could be attributed to the fact that the Fe bonds in the clay fraction of ATD were mainly present as ionic bonds. The TEM images showed that reacted clay particles displayed less aggregate particles, with nanoparticle aggregates and the Fe/S-rich tiny particles attached to the remains.     

对沈阳市大气污染现状治理对策浅析

阐述了沈阳市大气污染现状、主要污染源、治理对策及存在问题．     

作业区环境对现场操作室内工业卫生指标影响的探讨

针对化肥厂作业区个别现场操作岗位作业环境条件较差，噪声、尘、毒超标，操作室内通风采光不理想这一现象；我们分别选择两组尘、毒、噪声、高温发生源的车间、岗位分别进行作业环境监测。甲组具有自然通风和机械通风设施，乙组无自然通风和机械通风设施；测定结果表明，通风采光的好坏对现场操作室内空气的温度、相对湿度、照明度以及尘毒浓度有明显影响；而对噪声影响较小     

Effects of road dust on the growth characteristics of Sophora japonica L. seedlings

Road dust is one of the most common pollutants and causes a series of negative effects on plant physiology. Dust's impacts on plants can be regarded as a combination of load,composition and grain size impacts on plants; however, there is a lack of integrated dust effect studies involving these three aspects. In our study, Sophora japonica seedlings were artificially dusted with road dust collected from the road surface of Beijing so that we could study the impacts of this dust on nitrogen/carbon allocation, biomass allocation and photosynthetic pigments from the three aspects of composition, load and grain size. The results showed that the growth characteristics of S. japonica seedlings were mostly influenced by dust composition and load. Leaf N, root–shoot ratio and chlorophyll a/b were significantly affected by dust composition and load; leaf C/N, shoot biomass, total chlorophyll and carotenoid were significantly affected by dust load; stem N and stem C/N were significantly affected by dust composition; while the dust grain size alone did not affect any of the growth characteristics. Road dust did influence the growth characteristics more extensively than loam. Therefore, a higher dust load could increase the differences between road dust and loam treatments. The elements in dust are well correlated to the shoot N, shoot C/N, and root–shoot ratio of S. japonica seedlings. This knowledge could benefit the management of urban green spaces.     

Dust ignition of pure and encapsulated paraffin phase change materials

In this study, the dependence of the flammable concentration on particle size is investigated for Phase Change Material (PCM) and Encapsulated Phase Change Material (EPCM) particles using a novel continuous particle dispersion apparatus into which a propane flame is introduced creating a test akin to the flash-point test for liquids. The results show that the threshold concentration is a strong function of particle size. For tested particles with size ranging from 290 μm to 750 μm, the threshold concentration is above the predictions based on an instantaneous heat transfer limit, and is approximately linear with the particle size, following a heat transfer limited ignition model. For sizes above ≈1 mm, the particles behave like the bulk material, and ignition is not observed for the concentrations tested. The results obtained here are important for the safe construction, handling, and operation of systems using PCM and other particles.     

Efficiency of triggered barriers in dust explosion suppression in galleries

The paper describes large-scale tests of triggered barriers of different design. Main stress was put on examining suitability of the flame detector developed in US Bureau of Mines to work as a trigger for the barriers. It was found that the detector works satisfactorily with the barriers of different design providing a suitable mean to suppress explosions in galleries, either in mines or in other industries.     

Evaluation of the explosibility of malt grain dust based on static electrification during pneumatic transportation

The possibility of dust explosions by static electricity in a malt grain silo was investigated. Two kinds of experimental equipment were applied. One was to supply electrostatic charge in order to investigate the charge build up characteristics. The other was to transport the malt grain pneumatically in order to investigate the frictional charge accumulation in the transportation system.

The particle charge of the pulverized malt grain was in the order of 10⁻¹⁴ C. The particle charge of the malt grain was in the order of 10⁻⁹ C and the pipe charge in the transport system was also in the order of 10⁻⁹ C. The charge accumulated on both the pulverized particle and the grain particle were small in view of the incendiary potentiality. However, attention must be paid when the particles are dumped into isolated space. There might be a charge accumulation that will lead to the ignition of the dust cloud.