钠盐量影响下DD6单晶高温合金的高温热腐蚀规律研究

目的 开展镍基单晶高温合金DD6在950 ℃下的热盐腐蚀试验(95%Na2SO4+5%NaCl)，探明涂盐量和涂盐方式(周期涂盐和单次涂盐)对DD6高温热腐蚀的影响规律和机理。方法 结合扫描电子显微镜、X射线能量色散谱、X射线衍射等设备，对不同涂盐量及涂盐方式下DD6的表面及横截面形貌进行观察分析，分析不同涂盐量和涂盐方式下DD6的高温热腐蚀机理。结果 DD6在950 ℃下主要发生碱性熔融热腐蚀，同时伴随氧化、硫化和氯化等过程。高温热腐蚀使得DD6合金表面生成的保护性氧化膜被熔融态的腐蚀介质破坏，导致O、S、Cl等外部元素通过氧化膜的缺陷进入DD6基体中，在合金的亚表面发生内氧化、内硫化以及内氯化反应，横截面上出现明显的腐蚀层，其主要由氧化物以及硫化物组成。随着热腐蚀的进行，DD6表面物质发生了剥蚀，沉积盐量的增加导致剥蚀现象越加严重，合金内部致密的组织结构也被破坏，横截面上出现了大量孔洞、裂纹等缺陷。在相同涂盐量下，周期涂盐法使得DD6的腐蚀程度高于单次涂盐法。结论 DD6高温热腐蚀行为与涂盐量及涂盐方式密切相关，相同涂盐方式下，涂盐量越大，DD6热腐蚀更加严重。涂盐量一定时，周期涂盐法使得DD6的热腐蚀剧烈程度大于单次涂盐法，且DD6在上述热腐蚀条件下均发生剥蚀破坏。     

卧式电除尘器电晕极优化实验研究

运用粉尘粒子荷电原理,对四种电晕极的主要技术性能进行了试验研究,探讨了卧式电除尘器的最佳极配形式。     

地矿部门坑道作业尘毒危害情况

对坑道中的尘毒进行了测试,并根据测试结果提出了一些建议。     

胶带输送机防尘治理综合改进措施

叙述了胶带输送机现有防尘罩的不足及改进措施。     

磨细粉煤灰自动装车除尘系统的研制

针对磨细粉煤灰由储料仓向罐式汽车内装料的作业特点,研制了自动化装车除尘系统,解决了装车过程中的粉尘污染问题,并实现了装车过程的自动化。     

Flame behaviors and pressure characteristics of vented dust explosions at elevated static activation overpressures

Dust explosion venting experiments were performed using a 20-L spherical chamber at elevated static activation overpressures larger than 1 bar. Lycopodium dust samples with mean diameter of 70 μm and electric igniters with 0.5 KJ ignition energy were used in the experiments. Explosion overpressures in the chamber and flame appearances near the vent were recorded simultaneously. The results indicated that the flame appeared as the under-expanded free jet with shock diamonds, when the overpressure in the chamber was larger than the critical pressure during the venting process. The flame appeared as the normal constant-pressure combustion when the pressure venting process finished. Three types of venting processes were concluded in the experiments: no secondary flame and no secondary explosion, secondary flame, secondary explosion. The occurrence of the secondary explosions near the vent was related to the vent diameter and the static activation overpressure. Larger diameters and lower static activation overpressures were beneficial to the occurrence of the secondary explosions. In current experiments, the secondary explosions only occurred at the following combinations of the vent diameter and the static activation overpressure: 40 mm and 1.2 bar, 60 mm and 1.2 bar, 60 mm and 1.8 bar.     

含多弱层复合边坡滑坡治理三维数值分析

白音华二号矿滑坡区边坡治理工程是针对稳定性差的南帮非工作帮和南排土场构成的复合边坡进行的。滑坡体受多层弱层控制,治理过程中易导致边坡失稳,所以治理工程采取分区开采的条采方案,充分利用边坡治理的三维效应来进行边坡的失稳破坏研究和稳定性分析。选取滑坡区的典型剖面作为研究对象,基于强度折减方法(SRM),应用有限差分FLAC3D软件,在两种开挖条件下,对含多弱层的复合边坡的稳定性规律和破坏机制进行了数值模拟分析,揭示了多弱层对复合边坡的失稳破坏及稳定性的影响。研究结果表明,治理工程中,弱层被揭露一定宽度,滑体沿煤底板弱层水平错动、竖直方向拉裂破坏;随弱层暴露宽度的增加,边坡稳定性明显降低,说明治理边坡具有三维效应;开挖至3-3煤层底板,开挖坡角20°,弱层暴露宽度为400m,边坡的稳定系数刚好达到安全储备系数1.1,建议矿方首选此方案,可以最大限度的回收煤炭资源。     

Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.     

济宁南部区域耕作层土壤有机碳密度及储量研究

济宁市南部区域是著名的国家商品粮、优质大蒜、优质稻米和有机蔬菜生产基地,由于土壤有机碳作为农田生态系统中土壤肥力的重要组成成分之一,在土壤改良、作物质量和产量提高等方面都有十分重要的作用,因此,对济宁南部区域耕作层土壤有机碳密度及储量的研究具有十分重要的意义。本文以济宁南部煤田地区作为典型区域,以耕作层土壤(0~20cm)为研究对象,采集了79件耕作层土壤样品,利用元素分析仪测定了土壤样品中有机碳含量。经统计分析发现,各类型土壤有机碳密度介于1.92~4.83kg/m2之间,有机碳密度的加权平均值为4.03kg/m2,高于中国表层土壤有机碳密度的平均值2.97kg/m2;通过壤质类型分类而估算的有机碳总储量为4.57×109 kg,通过土壤利用方式分类而估算的有机碳总储量为4.53×109 kg,二者基本吻合;济宁南部区域耕作层土壤有机碳富集程度受人类活动影响较大,耕作层土壤中氮含量与有机碳的线性相关系数为0.924 9;另外,有机碳富集程度与秸秆返田规模也有着一定的关联。研究结果不仅为研究区今后开展耕作层土壤环境质量评价提供依据,也为区域生态平衡研究奠定了基础。     

滁州地区覆盖层厚度对场地地震动参数的影响

以滁州地区近百个钻孔资料为原型建立土层模型,采用一维频域等效线性化波动方法进行了土层地震反应分析,重点分析了覆盖层厚度对场地地震动参数的影响。研究结果表明,随着覆盖层厚度的增加,地表峰值加速度及土层放大系数逐渐增大,当覆盖层厚度超过一定值时,地表峰值加速度及土层放大系数呈逐渐缓慢减小的趋势;而反应谱特征周期总体上随着覆盖层厚度的增加而逐渐增大。