密闭爆炸容器实验研究及数值模拟

实验研究了三种结构的爆炸容器在爆炸载荷下的响应情况；并通过二维多流体欧拉程序对二维爆炸场进行了数值模拟．在这个基础上用ＮＩＫＥ－２Ｄ对壳体的动态响应进行数值模拟。     

控制排气放空噪声的消声器之研究与应用

排气放空噪声是工业上常遇到的噪声源。本文介绍了根据喷注噪声发射理论研制成的小孔喷注与节流降压相复合的新型消声器，适用于高压气源排放，取得了较好的消声效果。鉴于喷注发射噪声的强度取决于喷注的驻压与喷口直径等参量，对节流降压层的设计与控制小孔喷注层的驻压大小，提出了新的见解，可供设计研究喷注消声器参考使用。     

岩溶地基土洞塌陷评价及处理

地下水(地表水)产生的渗透潜蚀作用、崩解作用等是土洞形成和发展的重要原因。对工程实例中的土洞,采用极限平衡法和压力拱分析法进行了稳定性判别。在土洞中充填砼,然后采用压力灌浆,灌浆所采用的水灰比为1∶1~1∶1.5,灌浆压力一般为0.15~0.30 MPa,地基处理效果好。     

爆炸波在饱和土介质中传播时压力变化规律的试验研究

介绍了在Φ900平面波加载器中进行的饱和土爆炸波传播试验,通过试验比较系统地研究了爆炸波在饱和土自由场中的传播规律及其在刚性边界上的反射问题。试验表明饱和土中的气体含量是控制波传播规律的主要因素,在深度方向上自由场应力峰值可能随深度增加,而在刚性边界上荷载反射系数可能>2。对饱和土与非饱和土中波传播规律的区别,在确定饱和土中结构的设计荷载时必须给予极大的关注。     

Optimization of the high-pressure, near-critical liquid-based microsortation of recyclable post-consumer plastics

High-pressure, near-critical liquids were used as float-sink separation media for the microsortation of polyolefin mixtures and PET/PVC mixtures. Near-critical carbon dioxide was used for the refinement of the polyolefins, and sulfur hexafluoride was used to separate post-consumer PVC from PET. Preliminary experiments indicated that there was no overlap in the density ranges of post-consumer HDPE, LDPE and PP containers. There was no overlap in the PET and PVC densities, with the exception of a single PVC packaging material with a density in the PET range. These initial results indicated that a float-sink separation was a viable means of microsortation. Separations of 91% LDPE (1/8′ beads)/9% PP (1/8′ chopped strands) resin mixtures and mixed post-consumer polyolefin flakes were then conducted in a laboratory-scale, 1-I batch apparatus. This apparatus not only permitted the observation of the separation, but also enabled the separated fractions to be removed from the high-pressure environment. The results indicated that LDPE purity of greater than 98.9% was obtained in 3 min or less if (a) the fluid density was 0.018 g/cm³ greater than the PP density and only 0.002 g/cm³ less than the LDPE density, thereby providing the greatest buoyancy force for the removal of the PP, (b) the fluid was recirculated upward through the bed of mixed plastics, facilitating the upward movement of the PP, and (c) the loading was kept at levels below 40% by volume. HDPE purity of 99% was also attained with clean, dry, post-consumer mixed plastic flakes. The loadings for these separations were very low, however, due to the difficulty in agitating the mixed bed of plastics using fluid recirculation. An economic analysis of these microsortation processes indicated that the value of the sorted plastics relative to the mixed feed must increase by approx. $0.08/lb for the CO₂-based separation and approx. $0.27/lb for the SF₆-based separation to justify the implementation of these high-pressure processes.     

China’s Import of Wastes and Its Implications

Abstract

The trade of wastes in the world has been increasing and China has become the largest importer of wastes. This paper examines the import trend of different wastes and finds out that the total import volume to China approved by the Chinese government keeps increasing and the illegal trade can not be banned despite repeated prohibitions; therefore, China is not only “a world factory”, but actually “a global garbage dump”. In order to well understand the implications of wastes import, this paper further analyzes the resource and environmental effects and risks of different wastes imports as well as the strong driving force of wastes imports. Based on these detailed analysis and solid data, policy recommendations are put forward to reduce the demand for raw materials, to further strengthen the inspection of and supervision over the international trade of the wastes that can be used as raw materials by using the life cycle analysis and risk analysis, to improve the environmental standards and strengthen the disposal capacity, to re-export the raw materials produced from the imported wastes, to develop the long-term planning for the import of wastes and to promote international cooperation.     

起重机在特殊工况下的静刚度与动刚度安全性分析

通过对一台桥式电磁起重机静刚度和动刚度的理论计算,以及对其主梁的探伤检查,分析了桥式起重机在特殊工况下的静刚度和动刚度,指出了在设计时应考虑的安全性问题。     

长江三角洲地区耕地质量变化的初步研究——以锡山市为例

长江三角洲地区耕地质量变化的监测是区土地可持续利用研究的重点领域。锡山市位于太湖平原北部，其耕地质量变化过程反映了长江三角洲腹地经济发展水平较高地区的耕地现状和发展趋势。本研究以锡山市为典型区，依据第二次土壤普查资料，多年土壤监测数据和有关耕地系统状态的统计数据，结合研究区耕地状况的调查分析，提出了支持压力－状态－响应模型的耕地质量评价指标体系，并据此指标体系分析了该区耕地质量变化趋势。结果表明，该区耕地系统的发展总体上是可控的、有序的、但是耕地系统产出能力的稳定性呈下降趋势，系统高水平投入的维持面临较大的压力。鉴于人口增加和耕地持续减少的态势在很长一段时间内难以逆转，耕地占补的质量差异因素，是该区能否实现耕地总量动态平衡的关键所在。     

RS-PSO-ELM下腐蚀管道失效压力预测

为提高腐蚀管道失效压力的预测精度并简化其计算过程,提出基于粗糙集(RS)和粒子群算法(PSO)融合极限学习机(ELM)的腐蚀管道失效压力预测模型。通过属性约简提取影响失效压力的关键因素,选用PSO优化ELM的输入权值和隐含层偏差,将归一化的核心指标数据代入计算。结果表明:该模型预测结果与实际值基本一致,与单一ELM模型相比,预测结果的均方差(MSE)降至0.255;与其他蚀管道失效压力评价模型相比,该模型预测结果的绝对误差平均值降至0.32。     

Propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation

The coupled fluid-structure-rupture model was developed to study the propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation. The dynamic rupture of pipe and propagation of blast wave were well coupled together in every timestep during the simulation. The numerical model was validated with experiments in terms of both typical rupture profiles and blast overpressures. Results reveal that crack branching of pipe can dramatically increase the rupture opening rate which controls the intensity and shape of the resultant blast wave. Due to the process of crack initiation and extension, the blast wave out of the pipe first forms and then is strengthened by the subsequent compression waves. This makes the maximum peak overpressure appears at a certain standoff distance above the rupture. Despite consuming some percentages of energy, the dynamic rupture of pipe generally presents positive effects (up to 2–3 times) on the blast wave intensity along the jetting direction due to the convergence effect of rupture opening on the release of internal high-pressure gas. Finally, through defining normalized overpressure and impulse based on the same hydrogen detonation in open spaces, the quantitative influences of pipe rupture on the blast wave intensity in cases of different detonation pressures and standoff distances are clarified.