动态转盘过滤器去除城市生活污水中的SS及有机污染物COD的研究

本文主要对动态转盘过滤器对城市污水中SS及有机污染物COD的去除率进行了研究。     

Finite element modeling of microstructural changes in dry and cryogenic machining of AZ31B magnesium alloy

Unsatisfactory corrosion resistance is one of the major disadvantages of magnesium alloys that impede their wide application. Microstructural changes, especially grain sizes, of Mg alloys have significant influence on their corrosion resistance. Cryogenic machining was reported to effectively induce grain refinement on Mg alloys and has a potential to improve their corrosion resistance. It is important to model these changes so that proper machining conditions can be found to enhance the corrosion rate of Mg alloys. In this paper, a preliminary study was conducted to model the microstructural changes of AZ31B Mg alloy during dry and cryogenic machining using the finite element (FE) method and a user subroutine based on the dynamic recrystallization (DRX) mechanism of Mg alloys. Good agreement in terms of grain size and affected layer thickness was found between experimental and predicted results. A numerical study was conducted using this model to investigate the influence of rake angle on microstructural changes after cryogenic machining.     

Genotypic, size and morphological diversity of virioplankton in a deep oligomesotrophic freshwater lake (Lac Pavin, France)

We examined changes in morphological and genomic diversities of viruses by means of transmission electronic microscopy and pulsed field gel electrophoresis(PFGE) over a nine-month period(April–December 2005) at four different depths in the oligomesotrophic Lac Pavin. We found that the majority of viruses in this lake belonged to the family of Siphoviridae or were untailed, with capsid sizes ranging from 30 to 60 nm, and exhibited genome sizes ranging from 15 to 45 kb. On average, 12 different genotypes dominated each of the PFGE fingerprints. The highest genomic viral richness was recorded in summer(mean = 14 bands per PFGE fingerprint) and in the epilimnion(mean = 13 bands per PFGE fingerprint). Among the physico-chemical and biological variables considered, the availability of the hosts appeared to be the main factor regulating the variations in the viral diversity.     

Dynamic material flow analysis of steel resources in Korea

Material flow analysis (MFA) is an evaluation technique that systematically identifies the flows and stocks of materials within predefined spatial and temporal boundaries. In this paper, the steel resources in Korea are investigated using dynamic MFA. Iron ore and steel scrap are added as raw material components during the production processes of steel, which is then used in a variety of product groups such as construction products, transportation equipment, machinery/metal products, electrical/electronic devices, and other products through fabrication and manufacturing processes. When such product groups are discarded, they are either recycled or landfilled. With consideration for the lifetimes of various product groups in conjunction with steel resource flows in Korea, dynamic MFA is conducted on the flows of steel stock change and annual scrap generation. By 2020, these two flows are expected to increase by as much as 40% and 30%, respectively, compared to 2008, with transportation equipment, in particular, envisaged to experience high growth. At the current recycling rate, however, it will be hard to meet future scrap demand. According to the scenario analysis, 100% of this future scrap demand can be supplied domestically if the recycling rate is increased to over 70% for all product groups, except construction products and transportation equipment, which already have high recycling rates. By 2020, the reduction in scrap importation costs is projected to offer a financial gain of 2.3 billion dollars.     

合金钢组合辙叉轨下刚度对其安全性影响评估

为研究轨下刚度对合金钢组合辙叉安全性能的影响规律,并选取合适的刚度值,用以指导生产设计,以12号单开道岔合金钢组合辙叉为研究对象,建立辙叉整体模型及叉心模型。基于有限单元法,分析不同轨下刚度对列车动荷载作用下辙叉的受力及变形的影响规律,且对叉心燕尾部位进行疲劳检算。结果表明,随轨下刚度增加,列车对钢轨的冲击荷载逐渐增大,钢轨所受内部拉应力及竖向变形逐渐减小。经比较,刚度值选择50 kN/mm为宜,此时,叉心燕尾处应力及疲劳检算结果显示辙叉可以满足安全使用要求。综合各安全性指标选取合适的合金钢组合辙叉轨下刚度,有助于保证辙叉自身强度和行车安全性,以改善其使用性能,延长使用寿命。     

Dynamic floodplain vegetation model development for the Kootenai River, USA

The Kootenai River floodplain in Idaho, USA, is nearly disconnected from its main channel due to levee construction and the operation of Libby Dam since 1972. The decreases in flood frequency and magnitude combined with the river modification have changed the physical processes and the dynamics of floodplain vegetation. This research describes the concept, methodologies and simulated results of the rule-based dynamic floodplain vegetation model "CASiMiR-vegetation" that is used to simulate the effect of hydrological alteration on vegetation dynamics. The vegetation dynamics are simulated based on existing theory but adapted to observed field data on the Kootenai River. The model simulates the changing vegetation patterns on an annual basis from an initial condition based on spatially distributed physical parameters such as shear stress, flood duration and height-over-base flow level. The model was calibrated and the robustness of the model was analyzed. The hydrodynamic (HD) models were used to simulate relevant physical processes representing historic, pre-dam, and post-dam conditions from different representative hydrographs. The general concept of the vegetation model is that a vegetation community will be recycled if the magnitude of a relevant physical parameter is greater than the threshold value for specific vegetation; otherwise, succession will take place toward maturation stage. The overall accuracy and agreement Kappa between simulated and field observed maps were low considering individual vegetation types in both calibration and validation areas. Overall accuracy (42% and 58%) and agreement between maps (0.18 and 0.27) increased notably when individual vegetation types were merged into vegetation phases in both calibration and validation areas, respectively. The area balance approach was used to analyze the proportion of area occupied by different vegetation phases in the simulated and observed map. The result showed the impact of the river modification and hydrological alteration on the floodplain vegetation. The spatially distributed vegetation model developed in this study is a step forward in modeling riparian vegetation succession and can be used for operational loss assessment, and river and floodplain restoration projects.     

Are two resources really better than one? Some unexpected results of the availability of substitutes

The possibility of exploiting multiple resources is usually regarded as positive from both the economic and the environmental point of view. However, resource switching may also lead to unsustainable growth and, ultimately, to an equilibrium condition which is worse than the one that could have been achieved with a single resource. We developed a dynamic model where users exploit multiple resources and have different levels of preference among them. In this setting, exploiting multiple resources leads to worse outcomes in both economic and ecological terms than the single resource case under a wide range of parameter configurations. Our arguments are illustrated using two empirical situations, namely oil drilling in the North Sea and whale hunting in the Antarctic.     

Dynamic model of Lake Chozas (León, NW Spain)—Decrease in eco-exergy from clear to turbid phase due to introduction of exotic crayfish

We developed a dynamic model of the phosphorus cycle in Lake Chozas, a small shallow water body in León (NW Spain). The calibrated model simulated seasonal dynamics of phosphorus concentrations in major components of the lake's ecological network before and after 1997, the year when an invasive allochthonous crustacean, the Louisiana red swamp crayfish (Procambarus clarkii), was introduced into the lake. The shift from clean to turbid phase, due to grazing by crayfish on submerged vegetation, caused a gradual decrease in eco-exergy, reflecting an increase in entropy, related to breakdown of ecosystem internal equilibria. This case study verifies the hypothesis of Marchi et al. (2010) that, after an initial relatively stable state, the allochthonous species may cause an increase in entropy indicating perturbation of the ecosystem.     

Interactions between cod, herring and sprat in the changing environment of the Baltic Sea: A dynamic model analysis

The interactions between cod (Gadus morhua), herring (Clupea harengus) and sprat (Sprattus sprattus) in the Central Baltic Sea were examined with a simple dynamic model, an alternative to more complicated and data-demanding multispecies and ecosystem models. The main aims of the study were to compare the effect of alternative structures on the model output and examine the control relationships in the fish assemblage under different environmental conditions. The effect of environmental conditions was modelled using a stock-recruitment equation for cod incorporating an environmental index. The model output was especially sensitive to the functional response in predation by cod on herring and sprat. The type II functional response led to a collapse of the clupeid stocks when cod was abundant, while the type III response produced more realistic stock dynamics. According to the simulations, an abundant cod stock was able to keep the sprat stock at a low level, while the herring stock was less affected and benefited from the decreased density of sprat. Simulation of different fishing scenarios indicated that reducing fishing mortality to the level currently advised by ICES would allow the recovery of the cod stock even in unfavourable environmental conditions.     

不同地震荷载对黄土动模量和阻尼比的影响

不同地震荷载对黄土的动力特性有着重要影响。本文利用微机与我们组装的DSD160型电磁式振动三轴仪组成的一个可对试样施加任意波轴向荷载的动三轴试验系统，对黄土在不同地震荷载下的动模量和阻尼比进行了对比试验研究，初步得到了不同地震荷载对一组黄土的动模量及阻尼比影响的一些结果。