车用高分子材料不同地区户外曝晒试验相关性研究

目的将3种高分子材料以及3种车用外饰材料分别投放在中国海南琼海和美国佛罗里达州2种典型湿热环境中进行户外曝晒试验,研究气候相似的2种地区的试验相关性。方法通过测试相同时间间隔下不同材料在2处试验场曝晒过程中的黄变程度,表征材料的老化现象。采用斯皮尔曼等级相关系数的统计方法,研究材料在2个地区相同时间节点的试验结果的相关性,并利用时间同轴的作图方法比较2个地区严酷度的差异。结果琼海与佛罗里达州2个地区在各个时间节点的相关系数接近于1,且在材料黄变方面呈现一定比例关系。结论琼海和佛罗里达州2个地区的试验结果呈现出较好的相关性,且严酷度比值约为琼海︰佛罗里达=1︰1.19。     

Review and future of active disassembly

Disassembly has been widely accepted as a disadvantageous end-of-life activity, but with increasing pressures from directives, such as waste on electrical and electronic equipment, and with increasing pressures to become sustainable disassembly is becoming necessary. Current disassembly methods, including both manual and automated disassembly, need improvements to meet this necessity. This paper will introduce the improvements needed and suggest through literature the validity of active disassembly (AD) to provide these improvements. Past and current research will also be considered to provide a future path for AD. This future path for AD will consider a collaborative effort to solve problems with materials, environmental triggers and costs seen with AD.     

有机阳离子型电荷杀菌材料研究现状及展望

细菌等致病微生物可通过空气、水、土壤、食物等途径在自然界中传播,易对人体造成诸如肺结核、淋病、鼠疫等健康风险。目前广泛使用的灭菌方式包括紫外线、臭氧、氯气、电荷等物理或化学方法,其中电荷杀菌因具有无组织毒性的优点被广泛使用。研究表明:有机阳离子型电荷杀菌材料相比传统的金属离子杀菌材料具有抗菌效能优异、不产生耐药性、生物安全性高等优点,其杀菌性能受分子大小、烷基链、反离子类型、电荷密度等因素影响。本文系统综述了目前有机阳离子型电荷杀菌材料的类型、结构特征、杀菌性能及影响因素,抗菌机理及应用现状,分析了其存在的问题和发展方向,为有机阳离子型电荷杀菌材料的后续研究和应用提供一定的借鉴和指导。     

石棉摩擦材料废弃物制吸附剂对染料的吸附研究

以石棉摩擦材料加工废弃物为材料制得的吸附剂,在色度５０００倍溶液中对阳离子黄Ｘ－５ＧＬ的静态吸附量为１５９．６８ｍｇ／ｇ,在色度５００倍的溶液中对阳离子艳蓝ＲＬ的静态吸附量为７９．６８ｍｇ／ｇ;对毛纺厂腈纶染缸废水的处理量可达２８０ｍｌ／ｇ,对活性染料亦有较好的吸附效果,吸附饱和吸附剂可通过后处理实现资源化。     

磁性核壳CoFe2O4@SiO2@PIL-AO复合材料的制备及其吸附U (VI)性能研究

通过化学合成法制备了磁性核壳CoFe₂O₄@SiO₂@PIL-AO复合材料,采用傅立叶变换红外光谱（FTIR）、扫描电镜（SEM）和X射线光电子能谱（XPS）对其进行了表征,研究了溶液pH、吸附时间、U （VI）初始浓度和温度等参数对U （VI）吸附性能的影响.实验结果表明：在c₀=0.2 mg·L^-1、pH=6.00±0.05、T=298.15 K、m=0.02 g和t=8 h的条件下,CoFe₂O₄@SiO₂@PIL-AO对U （VI）的吸附作用最强,吸附率达到了97.54%;CoFe₂O₄@SiO₂@PIL-AO吸附U （VI）是一个自发进行的吸热反应,U （VI）吸附动力学符合准二级动力学模型,吸附等温线符合Freundlich模型;CoFe₂O₄@SiO₂@PIL-AO复合材料具有良好的可循环使用性,循环使用5次后它对U （VI）的吸附容量没有明显下降,可重复使用.     

金属冶炼进口物料的固体废物鉴别方法

建立了金属冶炼进口物料的固体废物鉴别方法,并利用该方法对海关查扣的3种金属冶炼进口物料进行了固体废物鉴别。鉴别结果显示:物料1、2和3的自然属性分别为砷含量超标铜精矿、锰阳极泥、回转窑氧化锌,产生来源分别为有害物质超标的产品、污染控制设施产生的物质、有意识加工的目标产物;物料1和2属于我国禁止进口的固体废物,物料3不属于固体废物。本文建立的固体废物鉴别方法可行,可为金属冶炼进口物料的固体废物鉴别和监管提供参考。     

Axi-symmetric simulation of soil vapor extraction influenced by soil fracturing

Fracturing, either pneumatic or hydraulic, is a method to improve the performance of soil vapor extraction (SVE) in relatively low permeability soils (< 10(-5) cm/s). A two-dimensional model is presented to simulate trichloroethylene (TCE) soil vapor extraction modified by fracturing. Flow and transport is modeled using mobile macropore and micropore networks, which also have been identified in the literature as dual porosity, dual permeability, or heterogeneous flow models. In this model, fluids can flow in both the macropore and micropore networks. This represents a more general model compared to immobile micropore, mobile macropore models presented thus far in the literature for vapor flow and transport in two dimensions. The model considers pressure- and concentration-driven exchange between the macropore and micropore networks, concentration-driven exchange between the gas and sorbed phases within each network, and equilibrium exchange between the gas and water and a sorbed phase within each network. The parameters employed in an example simulation are based on field measurements made at a fractured site. Considered in the simulations were the influence of the volume percentage of fractures, the length of fractures, the relative location of the water table, and the influence of pulsed pumping. For these simulations, internetwork concentration-driven exchange most significantly affected mass removal. The volume percentage of fractures more significantly influence flow and mass removal than the length of fractures. The depth of the water table below the contamination plume only significantly influenced flow and mass removal when the water table was within 60 cm of the bottom of the contaminated soil in the vadose zone for the parameters considered in this study. Pulsed pumping was not found to increase the amount of mass removed in this study.     

An analysis of variables influencing the material composition of automobiles

The use of materials is studied broadly, because of the environmental problems related to extraction, production, consumption and waste treatment. The use and substitution of materials in products is therefore a relevant issue for environmental policy making. Studies have been done to describe the material flow or to measure the impact of materials or products on the environment. However, these studies do not often consider economic, substitution and dynamic aspects of material flows. Other studies on material flows analyse the relationship between the use of materials and economic growth, but they do not consider substitution between materials. For environmental policy making economic, technological and environmental aspects of the use of materials need to be considered. Especially, substitution of materials is important. In various countries material and product policies are imposed on a variety of materials and products. For evaluation of these policies their environmental and economic effects need to be examined in detail. This study aims to analyse the economic and technological factors influencing the use of materials and the substitution between different materials dynamically. The goal is to obtain an insight in the effect that material levies may have on the use and substitution of materials. The statistical analysis is performed on a specific product-group because decisions on the use of materials are taken on a product-level. The case study is performed on automobiles. The results show that the material use is largely an autonomous development. The price of aluminium has a positive, significant effect on the use of that material. The price of plastics has a positive, but not significant effect on the use of plastics. Reasons may be that the costs of a raw material are small relative to the processing costs, and that the production process can only be changed slowly. Other factors, like competitiveness and consumers' tastes, may be more important for substitution. This implies that levies or subsidies on certain materials is not a promising policy to change the use of materials. Besides time, there are two other factors that have a positive and significant relationship with the use of aluminium and plastics: the fuel efficiency, which is the distance driven divided by the energy used; and, the road tax, which depends on the weight of a car. However, these effects are caused by their positive relationship with time. The main conclusion of the case study is that imposing a levy on materials may not have the desired or expected effect of reduction in material use.     

The velocity of DNAPL fingering in water-saturated porous media: laboratory experiments and a mobile–immobile–zone model

Dense nonaqueous phase liquids (DNAPLs) are immiscible with water and can give rise to highly fingered fluid distributions when infiltrating through water-saturated porous media. In this paper, a conceptual mobile–immobile–zone (MIZ) model is presented to describe the structure of a DNAPL finger in water-saturated porous media and the velocity of finger propagation. A finger is composed of a finger body and a tip. The finger body has a mobile core and an immobile sheath. All the DNAPL within the tip of a finger is mobile. Lab experiments utilizing image analyses of a DNAPL (PCE) penetrating into water-saturated homogeneous glass beads were carried out in a two-dimensional transparent chamber. The results show that the fingers elongated almost linearly with time. The fingers did not grow laterally after the tip of the finger had passed. The average finger diameters were between 3.9 and 5.4 mm for PCE propagation in water-saturated glass bead porous media with mean particle diameters from 0.32 to 1.36 mm. The estimated mobile core diameters were 51–60% of the average finger diameters.     

回填材料对土壤原位热传导修复的影响及数值模拟

原位热传导修复技术是一种有机污染土壤高效修复手段。由于施工过程中加热井与土壤间会存在一定空隙,关于是否使用回填材料以及回填材料的选取原则,尚未有明确的指导意见。利用实验和数值模拟方法,对原位热传导修复过程中回填材料的影响进行了研究,分析了不同加热温度(200、400 、600 、800 ℃)、回填材料(空气、原土)、回填厚度(40、100、150 mm)对传热的影响。结果表明,基于实验数据所建立的原位热传导数值预测模型是可靠的,模拟计算值与实测值最小平均相对误差为6.69%;当加热温度高于450 ℃时,无回填料时传热效果更好;当加热温度小于300 ℃时,用土壤回填较好;在300~450 ℃时,有无回填料传热效果相差不明显;原位热传导修复技术工程在应用过程中,回填材料厚度100 mm时传热效果最佳。本研究结果可为污染土壤原位热传导修复的工程实践提供参考。