Ecological Segregation of Bustards (Otididae) in the North of the Lower Volga Region: Evolutionary and Adaptive Aspects

Based on the concept of an ecological niche, the processes of segregation in the Lower Volga populations of great and little bustards (Otis tarda L. and Tetrax tetrax L). have been studied in the evolutionary and adaptive aspects. The results have shown that segregation of the ecological niches of the two species occurs mainly on a trophic basis, when bird specialization in the use of food resources provides the possibility of changing the nesting biotopes. Some trophic adaptations are temporary and do not modify a species-specific stereotype, whereas other adaptations lead to the development of new forms of behavior and their evolutionary stabilization. Spatial characteristics (biotopic preference, nest location, etc.) complement the identified hierarchical series of parameters characterizing the ecological niches of the species studied. In the Transvolga region of Saratov oblast, the total sizes of great and little bustard populations in the breeding season reach approximately 4100 and 5900 birds, respectively.     

Test of the adaptiveness of sex ratio manipulation in a parasitoid wasp

In behavioral ecology it is generally assumed that behavior is adaptive. This assumption is tested here for sex ratio manipulation in response to host size in the parasitoid wasp Spalangia cameroni. Females produce a greater proportion of daughters on larger hosts. If this behavior is adaptive, it is not through a positive effect of host size on the fitness of daughters, as theory suggests and as found for other species. Females that developed on larger hosts were not more successful at drilling into hosts, were not more successful at interspecific competition for hosts, and did not have greater dispersal ability as measured by wing loading (weight/area of wing and thorax). The possibility that S. cameroni's sex ratio manipulation may be adaptive through a negative effect of host size on the fitness of sons cannot be ruled out. Relative to males from larger hosts, males from smaller hosts had lower wing loading and thus potentially greater dispersal ability. The actual effect of wing loading on fitness remains to be tested.     

Meta‐Analysis of the Effects of Human Disturbance on Seed Dispersal by Animals

Animal‐mediated seed dispersal is important for sustaining biological diversity in forest ecosystems, particularly in the tropics. Forest fragmentation, hunting, and selective logging modify forests in myriad ways and their effects on animal‐mediated seed dispersal have been examined in many case studies. However, the overall effects of different types of human disturbance on animal‐mediated seed dispersal are still unknown. We identified 35 articles that provided 83 comparisons of animal‐mediated seed dispersal between disturbed and undisturbed forests; all comparisons except one were conducted in tropical or subtropical ecosystems. We assessed the effects of forest fragmentation, hunting, and selective logging on seed dispersal of fleshy‐fruited tree species. We carried out a meta‐analysis to test whether forest fragmentation, hunting, and selective logging affected 3 components of animal‐mediated seed dispersal: frugivore visitation rate, number of seeds removed, and distance of seed dispersal. Forest fragmentation, hunting, and selective logging did not affect visitation rate and were marginally associated with a reduction in seed‐dispersal distance. Hunting and selective logging, but not fragmentation, were associated with a large reduction in the number of seeds removed. Fewer seeds of large‐seeded than of small‐seeded tree species were removed in hunted or selectively logged forests. A plausible explanation for the consistently negative effects of hunting and selective logging on large‐seeded plant species is that large frugivores, as the predominant seed dispersers for large‐seeded plant species, are the first animals to be extirpated from hunted or logged forests. The reduction in forest area after fragmentation appeared to have weaker effects on frugivore communities and animal‐mediated seed dispersal than hunting and selective logging. The differential effects of hunting and selective logging on large‐ and small‐seeded tree species underpinned case studies that showed disrupted plant‐frugivore interactions could trigger a homogenization of seed traits in tree communities in hunted or logged tropical forests. Meta Análisis de los Efectos de la Perturbación Humana sobre la Dispersión de Semillas por Animales     

Correlation of pmax and KSt to specific surface area and calorific value of a dust

The safety characteristics p_max and K_St of a flammable dust are usually determined in a closed apparatus (20 l- or 1 m³-vessel). The results are strongly influenced by the parameters of the apparatus (e.g. the volume, geometry, dispersion system). The aim of this project is to investigate whether there is a correlation between p_max and K_St on the one hand and the calorific value H_S and the specific surface area S_m of the dust on the other. In an experimental study, around 200 dust samples from different sectors of industry will be analysed. The analysis of around 102 dusts shows that the correlation may be described by a logarithmic function. Owing to differences in reaction mechanism it is reasonable to formulate different functions for different substance groups (e.g. metals, organic materials). This may lead to an algorithm which can predict p_max and K_St from H_S and S_m within a defined range of error.     

Effect of sunlight radiation,rainfall and droplet spectra of sprays on persistence of bacillus thuringiensis deposits after application of dipel® 76af formulation onto conifers

Abstract

The effect of sunlight radiation, rainfall and droplet spectra of sprays on per ‐sistence of a Bacillus thuringiensis subspp. kurstaki (Btk) formulation, DiPel^® 76AF, was examined after application onto spruce [Picea glauca (Moench) Voss] foliage. The investigation consisted of three studies: (i) Study I: a laboratory microcosm study to examine the photostability of DiPel 76AF deposits on foliage after different periods of exposure to two radiation intensities, (ii) Study II: a laboratory microcosm study to examine the rainfastness of foliar deposits after exposure to different amounts of rainfall consisting of two separate droplet spectra, and (iii) Study III: a field microcosm study to investigate the influence of two different droplet spectra of DiPel 76AF sprays on foliar persistence of Btk under natural weathering conditions. In all studies, persistence of Btk was investigated both by bioassay [using spruce budworm (Choristoneura fumiferana Clemens)] and total protein assay.

The findings of Study I indicated that bioactivity of foliar deposits decreased with increasing duration of exposure to radiation, and with increasing radiation intensity. The half‐life (DT₅₀, the exposure period required for 50% of the initial bioactivity to disappear) was 5.1 d for the low intensity, and 3.9 d for the higher intensity. In contrast with the bioassay results, the total protein levels [determined by the bicinchoninic acid (BCA) method] showed no decrease with increasing duration of exposure, or with increasing radiation intensity.

The findings of Study II indicated that bioactivity of foliar deposits decreased with increasing cumulative rainfall. A new term, RF₅₀ [the amount of rain (in mm) required to washoff 50% of the initial deposit], was introduced to understand the relationship between rainfall intensity and reduction in bioactivity. When the same amount of rain was applied in different droplet sizes, the RF₅₀ value was high (5.2 mm) for the small rain droplets, and was low (2.9 mm) for the large rain droplets. Similar to the bioassay results, the total protein concentrations (determined by the BCA method) decreased with increasing amount of rain and with increasing rainfall intensity. The RF₅₀ value (obtained using ng protein /cm²) was 5.4 mm for the small rain droplets, and was 3.4 mm for the large rain droplets.

The field microcosm study indicated that when DiPel 76AF was applied in small droplets (D_v.5 of 65 μm), the persistence of bioactivity was ca 8.0 d, whereas when it was applied in large droplets (D_v.5 of 130 nm) it was ca 11 d. Bioactivity decreased with time after spray, and the DT₅₀ was 1.98 d for the spray of small droplets, and 2.87 d for that of large droplets. Similar to the bioactivity, the total protein concentrations also decreased with time after spray, and the DT₅₀ values for the small and large droplet spectra were 3.45 and 6.07 d respectively.     

Spray atomization characteristics as a function of pesticide formulations and atomizer design

Abstract

The use of formulation adjuvants to increase the drop size of pesticide sprays has followed a practice which has evolved through many years of experimentation and development. The earliest materials used were simply designed to make the spray mix viscous on the premise that a mayonnaise‐like fluid would produce larger drops and hence increase the deposit efficiency. These viscomer materials, emulsions and water soluble thickeners such as starch and agars, as well as more complex cellulose materials, produced thick non‐Newtonian fluids which were difficult to mix, pump and spray, and provided questionable results. First, the larger drops reduced target coverage from a given volume of spray; and second, field tests with these definitely showed that a large volume of small drops were still being produced even with the thickest of formulations.

The next step in adjuvant evolution was the introduction of polyvinyl, polyacrylamide and polyamide elastomer materials. These polymers are also non‐Newtonian, but due to their peculiar molecular bonding, they have the capability of forming long string‐like streams which when atomized can retract into a spray of large drops. Pure forms of these polymers are blended by commercial producers to enable compatibility with pesticide chemicals. We have conducted a series of laboratory and wind tunnel tests; first, to try and establish some physical parameters identifying their characteristics and second, to determine how these adjuvants affect atomization and the production of small drift‐prone drops (i.e., those smaller than 120 μm in diameter).

Our results with the laboratory studies of physical properties and of the wind tunnel drop size tests have been inconclusive. The elastomer materials have relatively low viscosity (1.5 to 6 mPa.s) and reduced surface tension (50 to 60 mN/m) but our stream‐flow extension tests were non‐productive. The drop size studies comparing water sprays with polymer‐water mixtures gave us a mixed picture. Generally drop size was increased for all of the fan (deflector and milled orifice) and cone type atomizers. But an increase was also indicated of the volume of spray in drops less than 120 μm showing that the polymer did not fully control the production of these small drops under all of the testing procedures we studied.

It is difficult to evaluate the capability of these additives for controlling or reducing production of the drift‐prone small drops. While the pure solutions of the water soluble polymers would appear to be capable of this desirable effect, it is also evident that in order to make these formulations compatible with pesticide spray solutions, several other solvents, emulsifiers and surface active chemicals are added to the formulation, thus affecting the atomization characteristics and hence their drift‐control capability.     

The Relative Efficiency of Ranked Set Sampling in Ordinary Least Squares Regression

Ranked set sampling was developed for situations where measurement cost is expensive compared with unit acquisition. This paper presents results of simulations and theory examining the impact of balanced ranked set sampling on the relative efficiencies of the slope and intercept estimators of an ordinary least squares regression. Perfect ranking of either the independent or the dependent variable is assumed throughout. In contradistinction to most of the published ranked set sampling work, it is demonstrated that balanced ranked set sampling offers at most little improvement in the relative efficiencies of the slope estimator at any sample size.     

Gini Index for Cities: A Preliminary Study on Regional Differences of Chinese City Size Distribution

Abstract

City size distribution is of interest because of a number of key stylized facts, including notably Zipf's law for cities and the importance of urban primacy. But a new and more efficient method Gini index can be used for calculating regional city size distribution. This paper begins by developing a calculation method for the Gini index, dividing the whole country into 26 areas and then calculating each area's Gini index value. Based on these calculation results, this paper gives a preliminary study on regional differences of its city size distribution and the dynamics.     

Size structure of urban agglomerations in China: rationality evaluation,patterns, and implications

ABSTRACT

This paper establishes a diagnostic model for assessing the rationality of size structure of urban agglomerations (UAs) in China. The model is designed to determine from a three-dimensional index including size distribution index (SDI), size compactness index (SCI), and size efficiency index (SEI). The spatio-temporal pattern of size structure involving the studied 19 UAs and its implications are explored. The results indicate that size structure of China’s UAs advanced from a low rationality development stage to a moderate rationality development stage in 1995–2015. Among them, the SDI and SEI were reasonably high, and the SCI was relatively low. Spatially, the high rationality UAs were distributed across eastern China, while the low rationality UAs were located in western China. UAs with positive size structure possessed typically a dual- or multicenter urban structure, while UAs with negative size structure usually presented as a single-center structure. The evolutionary trajectories of rationality of size structure of UAs can be summarized as four different stages. Our findings suggest that, in addition to consolidating the status of national-level UAs, the development of regional-level UAs should be promoted. Also, the fostering focus and direction should be oriented toward an UA with dual- or multicenter spatial structure.     

Factorial analysis of diesel engine performance using different types of biofuels

In this study, several bio-source-fuels like fresh and waste vegetable oil and waste animal fat were tested at different injector pressures (120, 140, 190, 210 bar) in a direct-injection, naturally aspirated, single-cylinder diesel engine with a design injection pressure of 190 bar. Using 2k factorial analysis, the effect of injection pressure (Pi) and fuel type on three engine parameters, namely, combustion efficiency (etac), mass fuel consumption (mf), and engine speed (N) was examined. It was found that Pi and fuel type significantly affected both etac and mf while they had a slight effect on engine speed. Moreover, with diesel and biodiesels, the etac increased to a maximum at 190 bar but declined at the higher Pi value. In contrast, higher Pi had a favorable effect on etac over the whole Pi range with all the other more viscous fuels tested. In addition, the mass fuel consumption consistently decreased with an increase in Pi for all the fuels including the baseline diesel fuel, with which the engine consistently attained higher etac and higher rpm compared to all the other fuels tested.