煤矿通风机电机温度高故障研究与解决应用

经过充分调研,结合理论分析,从选型、设计制造、试验、运行维护4个方面全面分析煤矿通风机电机温度高的故障原因,从选型、设计、立法与标准制定、执法等方面提出了具体的解决措施,最后结合具体实例,应用提出的措施很好地解决了煤矿通风机电机温度高的故障。     

膜法解吸CO_2吸收富液

采用中空纤维膜接触器(FMC)作为解吸装置,对吸收了CO_2的N-甲基二乙醇胺(MDEA)溶液(富液)进行膜法解吸实验。考察了CO_2负荷、解吸温度、解吸压力、富液流速和N_2吹扫流量对CO_2解吸率的影响。结果表明,富液中CO_2负荷越大、解吸温度越高、解吸压力越低、富液流速越大、N_2吹扫流量越大,则CO_2解吸率越高。综合考虑,本实验优选的工艺条件为解吸温度45~65℃,解吸压力10~30 k Pa,富液流速0.08 m/s,N_2吹扫流量200 m L/min。     

An enhanced sustainable approach for design and manufacturing with an application to fuselages for mono-seat civil sailplanes

Abstract

A number of tools and software systems have been developed in order to reduce the time for the design and manufacturing of industrial products. Nowadays, virtual modelling by Computer Aided Design (CAD) systems and process simulation by the application of Finite Element Method (FEM) software is a standard routine in order to compress product design activities and to achieve the optimal solution before producing any real components. These developments provided not only a reduction in the time to market but a higher complexity of the project and an improved quality of the industrial products. With the aim to further improve the sustainability of this activity, the implementation of a tool that adds automatic operations into the design activity is demonstrated. This software can interact with any CAD and helps designers when the object dimension and shape can be affected by limits and constraints deriving from different features and targets, such as the spatial collocation of the component and the interaction with other limiting items, for examples the material and the manufacturing issues. The concept was developed into the software SFIDA (Sailplane Fuselage Integrated Design Application) that is a first attempt to automatically manage multiple relations and optimise their combination.     

铜基钯镍退镀液中铜的再生利用

采用硫氰酸盐沉铜法回收铜基钯镍退镀液中的铜。沉铜的优化工艺条件为初始Cu~(2+)质量浓度3.84 g/L、Cu~(2+)与Na SCN及Na_2SO_3摩尔比1∶4∶0.6、沉铜反应温度30℃,陈化时间24 h,沉铜反应后退镀液中Cu~(2+)残留量仅为0.025 mg/L。在此条件下加入聚乙二醇1.5 g/L,并提高分散液温度至50℃,可制得平均粒径为0.472μm的CuSCN超细粉体。CuSCN粉体为类球形,为含α、β两种晶型的混晶。     

黄钠铁矾法氧化去除废锂电池硫酸浸出液中的铁

废锂电池中含有的Co、Ni和Cu等金属具有回收价值,Fe的存在降低了有价金属的回收效率。为去除废锂电池硫酸浸出液中的Fe,采用黄钠铁矾法分别以氯酸钠和过氧化氢作为氧化剂氧化除Fe,并优化了过氧化氢作为氧化剂的除Fe工艺参数。实验结果表明:过氧化氢作为氧化剂的除Fe效果好于氯酸钠;在n(H2O2)∶n(Fe)=0.5、初始溶液pH为1.8、终点pH为2.5、反应时间为2.0 h、搅拌速率为500 r/min的最佳工艺条件下,初始ρ(Fe)为0.212g/L的硫酸浸出液经除Fe处理后ρ(Fe)小于0.004 g/L,Fe去除率达98.0%,Co、Ni和Cu的损失率分别为1.04%、2.17%和1.41%。     

过量钠盐和盐渍土壤提取液对3种外生菌根真菌生长的影响

美味牛肝菌(Boletusedulis)、红绒盖牛肝菌(Xerocomuschrysenteron)和铆钉菇(Gomphidiusviscidus)3种外生菌根真菌在不同浓度钠盐(0.05、0.10和0.20mol·L-1)和东营地区盐渍土壤提取液中培养,结果表明:钠盐处理促进了美味牛肝菌菌丝生长,生物量积累增加,而红绒盖牛肝菌和铆钉菇菌丝生长明显受到抑制。在土壤提取液培养条件下,供试3菌种菌丝的生长均受到极显著抑制。在不同浓度钠盐处理下,菌丝中钠元素的含量随培养基中钠盐浓度的增加而提高,说明菌丝对钠元素有较强的吸收能力。但不同菌种菌丝对钠元素的吸收和积累方式存在显著差异。     

排桩+斜支撑在某大面积基坑开挖中的受力变形性状研究

随着基坑工程开挖面积越来越大,出现了一种排桩+斜支撑的组合支护结构。本文基于两阶段分析方法,首先采用Winkler地基模型模拟排桩的桩土作用,运用有限差分法考虑土的分层特性,然后应用水平受荷桩简化Mindlin解,考虑该组合支护结构的桩-桩相互影响,计算其遮拦效应,从而得到开挖条件下支护结构桩水平反应的简化分析方法。最后,结合济南某基坑工程实例,通过有限差分的方法,研究了排桩+斜支撑组合支护结构的受力变形特性。结果表明,该组合支护结构能够通过支撑桩和排桩的合理布置,有效调动基坑内部土体抵抗荷载,协调基坑土体变形以及支护结构的变形。     

Plant uptake of radiocaesium from artificially contaminated soil monoliths covering major European soil types

Uptake of ¹³⁷Cs was measured in different agricultural plant species (beans, lettuce, barley and ryegrass) grown in 5 undisturbed soil monoliths covering major European soil types. The first cultivation was made three years after soil contamination and plants were grown during 3 successive years. The plant–soil ¹³⁷Cs transfer factors varied maximally 12-fold among soils and 35-fold among species when grown on the same soil. Single correlations between transfer factors and soil properties were found, but they varied widely with plant type and can hardly be used as a predictive tool because of the few soils used. The variation of ¹³⁷Cs concentrations in plants among soils was related to differences in soil solution ¹³⁷Cs and K concentrations, consistent with previous observations in hydroponics and pot trials. Absolute values of transfer factors could not be predicted based on a model validated for pot trials. The ¹³⁷Cs activity concentration in soil solution decreased significantly (11- to 250-fold) for most soils in the 1997–1999 period and is partly explained by decreasing K in soil solution. Transfer factors of lettuce showed both increasing and decreasing trends between 2 consecutive years depending on soil type. The trends could be explained by the variation in ¹³⁷Cs and K concentrations in soil solution. It is concluded that differences in ¹³⁷Cs transfer factors among soils and trends in transfer factors as a function of time can be explained from soil solution composition, as shown previously for pot trials, although absolute values of transfer factors could not be predicted.     

企业安全管理体系的功能实现——生产安全问题确认和求解的视角

针对企业安全管理体系相关工作与日常安全管理之间存在的"两张皮"现象,首先借助企业生产安全"问题空间"和"解空间"的概念,探讨了企业安全管理的出发点和落脚点;然后,围绕企业具体安全问题的确认和求解,分析了如何在组织层面通过三阶"学习循环"推进体系功能的实现;最后,基于RACI模型探讨了如何在个体层面支持和响应组织层面的各阶"学习循环"以真正实现体系的功能。总之,"两张皮"现象主要来自企业生产安全"目的"和"手段"不能有效对接,安全管理体系建设和功能实现应从辨识和解决企业实际问题入手。     

芳香烃在简单盐水溶液中ks值的计算

运用分子拓扑理论探讨了芳香烃在简单盐水溶液中盐效应常数ks与芳香烃和盐结构之间的定量关系,提出了新的拓扑指数,给出了新的计算方法,也计算了盐效应常数ks 的各种理论值,并与实验值进行了比较,证实了新方法的计算值最接近实际.