初始浓度分布对一维含水层中溶质运移的影响

为了研究含水层中任意初始浓度分布条件下一维含水层介质中的溶质运移规律,采用对流-弥散方程构建考虑任意初始浓度分布条件下一维含水层介质中溶质运移动力学数学模型,模型采用持续注入示踪剂、瞬时注入示踪剂和脉冲注入示踪剂3种不同的边界条件,数学模型的求解采用格林函数法.并通过开展室内一维砂柱实验进一步验证模型的科学性和适用性....     

寻求解决乌鲁木齐市空气污染的途径

针对乌鲁木齐市最突出的环境问题——冬季采暖期空气污染,从主客观二方面进行了原因分析,并结合“十一五”和2020年环境保护目标,从7个方面分析论述了解决乌鲁木齐市空气污染的途径,使多年困扰乌鲁木齐市的空气污染问题有望从根本上得到解决。     

扶梯乘员坠落的法律归责思考与对策

扶梯乘员坠落事故已经发生多起,如何进行相关风险的辨析并提出防范对策,是电梯从业者难以回避的课题.本文试从生产者、经营管理者之角度就此课题进行“归责”与“对策”的辨析与思考,希冀关注者有所借鉴,防范已经存在或可能发生的风险.     

Effects of dissolved inorganic carbon and nutrient levels on carbon fixation and properties of Thermosynechococcus sp. in a continuous system

The concept of CO₂ chemo-absorption by sodium hydroxide in a wet scrubber followed by microalgae cultivation was used as a means to reduce the major greenhouse gas. A thermophilic and alkaline tolerable cyanobacterium named Thermosynechococcus CL-1 (TCL-1) was cultivated in continuous system, with a carbonate-bicarbonate buffer as carbon source. The effects of dissolved inorganic carbon (DIC_in) and nutrient levels in influent on cell mass productivity, DIC removal efficiency, and alkaline solution regeneration by TCL-1 were investigated. The results show the highest cell mass productivity reaches 1.7 g L⁻¹ d⁻¹ under the highest DIC and nutrients level. Conversely, the best regeneration of alkaline solution proceeds from pH 9.5 to 11.3 under the lowest level. In addition, the highest ΔDIC (DIC consumption) and DIC removal efficiency are 42 mM and 43% at 113.2 and 57 mM DIC_in, respectively.     

Behavior of bensulfuron-methyl in an agricultural alkaline soil

A field experiment to determine the available bensulfuron-methyl (BSM) in the upper soil layer was conducted in an agricultural area in the South of Spain. To facilitate herbicide analysis, two application rates were employed, 200 g ha^?1 and 5 kg ha^?1. Samples of upper soil and soil solution were collected. Soil solution was sampled by means of metallic samplers, placed at a depth of 35 cm. In the plots receiving the lower dose ceramic suction, porous cups were also installed. Results from soil solution samples showed that the maximum BSM concentration was found after 8-10 days for the high irrigation supply (945 mm) and after 18-25 days for the lower irrigation regime (405 mm). The mathematical model FOCUSPELMO 1.1.1 was applied to interpret the data obtained in the field experiments. In general, there was a reasonable agreement between experimental and simulated data for soil samples, although the model did not acceptably predict herbicide concentrations in water soil samples. Ceramic cups sampled a higher soil water volume and more frequently than did the metallic samplers. However some variable results were attributed to preferential flow.     

液晶显示器玻璃基板回收工艺

利用无机溶液对废液晶显示屏的玻璃基板回收工艺作了初步的探索,根据回收处理的难易,简单地将废弃液晶显示屏分为3类:含树脂黑色矩阵膜的上层玻璃基板可以采用氢氧化钠直接浸泡处理、含铬黑矩阵膜的上层玻璃基板和下层玻璃基板可以先用氢氧化钠溶液浸泡去除偏光片,再用氢氟酸溶液浸泡处理。结果表明,利用无机溶液处理可以较快得到干净的玻璃基板,而且工艺简单、成本低。     

基于海水和盐田水的正渗透驱动液

采用海水和盐田水作为驱动液,研究正渗透过程中的通量变化和膜污染特征,探索其作为驱动液的可行性。结果表明,海水和盐田水含有大量的盐离子,具有高的渗透压,海水、2#、5#和9#盐田水与0.42、0.8、2.2和4.2 mol/L的氯化钠具有同样的通量行为。随海水和盐田水浓度增加,通量增加,同时污染也越严重。扫描电子显微镜观察和荧光光谱分析发现,盐田水中的硅酸盐和有机物会沉积在膜表面,引起比较严重的膜污染,尤其是高浓度的盐田水。海水和盐田水作为正渗透过程中的驱动液需要进行一定的预处理。     

Fluid bed gasification – Plasma converter process generating energy from solid waste: Experimental assessment of sulphur species

Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO₂ and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO₂’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO₂ was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO₂ generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling.     

十三烷基苯磺酸钠和辛基酚聚氧乙烯醚二元复配溶液的定量分析

采用向十三烷基苯磺酸钠（STBS）和非离子表面活性剂辛基酚聚氧乙烯醚（OP-10）二元复配溶液中添加β-环糊精（β-CD）的方法,降低STBS和OP-10之间定量检测时的相互干扰。实验结果表明：添加β-CD时,可提高STBS的检测准确性,降低STBS对OP-10的检测干扰;在二元复配溶液中,STBS和OP-10的方法回收率分别在100.8%~102.0%,97.4%~102.2%之间,检测误差分别在2.0%和2.6%以内;Cl^-,SO₄^2-,Na⁺,Ca²⁺的存在对二元复配溶液中STBS和OP-10的检测干扰可忽略;将该方法应用于地层水水样中,仍可准确定量分析STBS和OP-10的含量。     

玻璃减薄蚀刻液中氟硅酸的选择性脱除方法

光电玻璃减薄蚀刻液中氟硅酸(H2SiF6)的累积,是导致蚀刻液无法连续使用而转化为废液的主要原因。尝试对蚀刻废液中氟硅酸进行选择性脱除工艺,探索刻蚀液循环利用的有效处理方法。鉴于氟硅酸的碱金属盐具有溶解度较低的特点,研究考察了利用钠盐或钾盐为沉淀剂,将废液中的H2SiF6以氟硅酸盐的形式沉淀去除,为实现蚀刻液的循环利用提供可能。结果表明,KCl相比NaCl对H2SiF6处理效果更好,但生成的K2SiF6的结晶颗粒过细,难以自然沉降,过滤效果较差;而Na2SiF6结晶沉降特性较好,且使用NaCl为沉淀剂具有价廉易得等特点,可作为氟硅酸的理想沉淀剂。H2SiF6去除率与碱金属盐H2SiF6摩尔计量比正相关,当摩尔计量比NaCl/H2SiF6=2,H2SiF6含量10%的模拟废液,其H2SiF6去除率可达到90%以上。