利用磷化渣配制复合磷化液

采用固体废物磷化渣配制成复合磷化液,并用所配制的复合磷化液对A3钢试件进行磷化处理,形成磷化膜。通过正交实验确定了配制复合磷化液的较佳配方为：磷化液基础液加入量0．2L／L、氧化锌加入量5g／L、碳酸钠加入量6g／L、硝酸加入量12．5mL／L、浓磷酸加入量2．5mL／L、硫酸铜加入量0．3g／L。复合磷化液为浅绿色透明溶液,pH为4．0,总酸度为40,游离酸度为10,磷化温度为65℃,磷化时间为300～600s。所形成的磷化膜厚度为16．0μm,单位质量为26．875g／m^2,粗糙度为1．425μm,维氏硬度为124．27kgf／mm^2。磷化膜硫酸铜点滴时间为35s,耐盐水时间为8h,耐盐雾时间为4h,其物理性质和耐蚀性能均较佳。     

高职《给水工程》教学新设想

通过介绍《给水工程》课程的性质和作用,分析目前《给水工程》课程教学中存在的主要问题,对课程今后的教学思路提出了新设想,主要包括：依托学科建设优势,引入科学研究新成果,构架全新课程内容体系;尝试采取＂课堂＋网络辅助＂教学模式;采用多媒体教学和传统讲授相结合的理论教学手段和课堂演示与工程现场结合、教师演示与学生动手结合、经典演示与现代高科技结合、传统演示与多媒体结合的实践教学手段;采用变一考为多考和加重平时成绩的课程考核方式等。     

Polyaniline nanofibers: acute toxicity and teratogenic effect on Rhinella arenarum embryos

The fate and effect of nanomaterials in the environment is of paramount importance towards the technological application of the materials. This work shows the ecotoxicological potential of polyaniline (PANI) nanofibers in the larvae Rhinella arenarum by means of AMPHITOX test. Acute toxicity of PANI nanofibers towards embryos of the common South American toad R. arenarum (Anura: bufonidae) was evaluated in the premetamorphosis (stage 25) larvae. The exposure of R. arenarum larvae to at dose of 150, 250 and 400 mg L⁻¹ resulted in 100% viability within 96 h exposure. The embryos at 2-4 blastomers stage (early life stage teratogenic test) revealed that embryos were not killed and no teratogenic effects were observed when embryos were incubated with PANI nanofibers (150 and 250 mg L⁻¹), while only a growth retardation of embryos was induced at levels of 250 mg PANI nanofibers L⁻¹. On the other hand, at 400 mg L⁻¹ concentration, a reduction in the body length of larvae and tail malformation was observed. This results suggest that a concentration-dependent toxicity is operative, typified by phenotypes that had abnormal body axes. The presence of PANI nanofibers in gut contents and its excretion by larval stages of R. arenarum was confirmed by UV-visible spectroscopy.     

探讨河道治理类工程环境影响评价及环保措施

本文对河道治理工程对大气环境、水环境、生态环境、声环境等方面产生的负面影响进行分析和评价,并提出具有针对性的解决对策,力求通过注重建材堆放、科学设置污水池、保持水土、减低噪声等方式,在确保工程顺利开展的同时,使环境问题得到有效解决。     

New best estimates for radionuclide solid–liquid distribution coefficients in soils,Part 1: radiostrontium and radiocaesium

Best estimates for the solid-liquid distribution coefficients (K_d) of radiostrontium and radiocaesium for various soil types, were derived from geometric means (GM) calculated from grouping soils by texture and organic matter content, and also using soil cofactors governing soil–radionuclide interaction. The K_d (Sr) GM for Sand, Loam, Clay and Organic groups were similar, although the value for the Sand group was significantly lower. The Sr cofactor approach, based on the ratios of cation exchange capacity (CEC) to Ca and Mg concentrations in the soil solution, leads to K_d (Sr) GM with a lower variability, from which best estimates could be proposed. The K_d (Cs) GM for Sand and Organic groups differed, although similar values were obtained for Loam and Clay groups. Grouping the K_d (Cs) according to the Radiocaesium Interception Potential (RIP) and the RIP divided by the K concentration in the soil solution also allows to suggest K_d (Cs) best estimates with a lower variability.     

Sustainable engineering education in the United States

Sustainable engineering is a conceptual and practical challenge to all engineering disciplines. Although the profession has experience with environmental dimensions of engineering activities that in some cases are quite deep, extending the existing body of practice to sustainable engineering by including social and cultural domains is a significant and non-trivial challenge. Nonetheless, progress is being made, as a recent study undertaken by the Center for Sustainable Engineering in the United States demonstrates.

埋地聚乙烯燃气管道基于失效模式的全面检验关键技术及工程应用

PE管道固有较高的性价比,广泛应用在能源、燃气等工程中,但因其焊接接头质量难以检测、位置探查难度大,使PE管道的安全状况难以控制,导致泄漏等事故。基于PE管材的失效模式,参照钢质管道的检验经验,中国特种设备检测研究院研究确定了PE管道基于失效模式的全面检验关键技术,并围绕关键技术开展了多项研究,取得了一系列科研成果,如：PE管焊接质量超声相控阵动态聚焦和B扫查成像检测、探地雷达、泄漏在线检测、老化及安全评价、风险评估方法等。这些系列成果,在新疆、青海、内蒙古、宁夏等城市PE燃气管网中得到了有效应用,检验出多项安全隐患,为城市燃气的安全提供了保障,为今后全面开展PE管线检验,提供了成功经验。     

模拟电镀污泥重金属浸出液对氧化亚铁硫杆菌活性的影响

从浙江温州某制革厂污泥中筛选到1株细菌,对其形态和16S rDNA序列研究表明,细菌细胞呈杆状,革兰氏染色阴性,其16S rDNA序列与嗜酸性氧化亚铁硫杆菌标准菌株Acidithiobacillus ferrooxidans ATCC23270的序列相似度为99%,可鉴定为嗜酸性氧化亚铁硫杆菌菌株,暂命名为WZ-1.为了研究电镀污泥浸出液中重金属离子对WZ-1活性的影响,考察了Ni2+、Cr3+、Cu2+、Zn2+这4种重金属离子及5种不同模拟电镀污泥重金属浸出液对WZ-1 Fe2+氧化活性和表观呼吸速率的影响,结果表明菌株在接种量6.7%、初始pH 2.0、温度30℃、转速150 r·min-1的条件下,浓度分别为5.0 g·L-1、0.1 g·L-1的Ni2+、Cr3+对WZ-1的活性没有影响;WZ-1对Ni2+、Cr3+、Cu2+、Zn2+的最大耐受浓度分别为:30.0、0.1、2.5、30.0 g·L-1;5种模拟电镀污泥重金属浸出液对WZ-1活性的影响有明显差异,抑制强弱顺序为:Cu/Ni/Cr/Zn>Cu/Ni/Zn>Cu/Cr/Zn>Cu/Ni/Cr>Ni/Cr/Zn.     

材料自然环境试验数据工程化应用方法探讨

目的研究探讨材料自然环境试验数据在装备设计选材和寿命预测方面的工程化应用方法。方法通过分析材料自然环境试验数据与装备实际使用状态的符合性原则,利用肖维奈准则和子样变异系数法对暴露于海南万宁的2A12铝合金抗拉强度试验数据进行处理。采用环境效应修正系数C-t曲线初步评价2A12铝合金在某型飞机上的工程应用情况及使用寿命。结果 2A12铝合金海洋大气环境下最终的使用年限为36年,满足在海洋大气环境服役使用要求,同时满足一般军用飞机最长30年日历寿命要求,可将2A12铝合金应用于机身、机翼上翼面、平尾、垂尾等机体主要部位。结论该方法初步实现了材料自然环境试验数据在某型飞机上的工程化应用。