离子色谱在监测土霉素结晶母液废水处理过程中土霉素含量的研究

土霉素结晶母液是一种含高硫高氮的高浓度难生物降解有抽废水,有用前置反硝化法对其进行脱氮处理过程中,残留的土霉素等对反硝化有明显的生物和抑制作用,用离子色谱法（以0mniPac PCX-100为分离柱,0.2mol.l^-1盐酸－27.9%乙腈（V／V）为淋洗液）测定经预酸化处理后废水中的土霉素含量,分析结果表明,预酸化处理可以显著降解废水中的土壤素,提高其可生化性,该法6min内即可完成土霉素含量的测定,土霉素的检出限为10ug.l^-1.     

Modification of FGD gypsum in hydrothermal mixed salt solution

A novel utilization way of the sludge from wet calcium-based flue gas desulfurization （FGD） processes has been developed in this paper. This study focused on the conversion of the FGD gypsum into α-hemihydrate calcium sulfate by a hydrothermal salt solution method at atmospheric pressure. Experimental study has been carried out in a batch reactor. Qualitative and quantitative analyses were made by DSC/TG thermal analysis, SEM, XRD, metalloscope and chemical analysis. The experimental results showed that the modification of FGD gypsum was controlled by the dissolution and recrystallization mechanisms. With the introduction of FGD gypsum the salt solution was supersaturated, then crystal nucleus of α-hemihydrate calcium sulfate were produced in the solution. With the submicroscopic structure of FGD gypsum crystal changed, the crystal nucleus grew up into α-hemihydrate calcium sulfate crystals. Thus ,the modification of FGD gypsum was fulfilled.     

土壤氨氮、亚硝酸盐氮、硝酸盐氮的测定试料保存实验

对测定土壤中氨氮、亚硝酸盐氲、硝酸盐氲的试料保存条件和时间进行研究。结果表明,在4℃、避光保存的条件下,试料可以保存7d,而各组份浓度值基本保持不变。其中,氨氮的本底试料值相对标准偏差为2．86％,加标试料值相对标准偏差为2．88％,加标回收率为85．8％～101％;亚硝酸盐氮加标量为0．5μg试料值相对标准偏差为3．55％,加标量为4．0μg试料值相对标准偏差为2．93％;硝酸盐氮与亚硝酸盐氮总量的本底试料值相对标准偏差为7．02％,加标试料值相对标准偏差为4．56％,加标回收率为82．6％～104％。     

项目竣工环境保护验收监测报告编制中若干问题的探讨

对项目竣工环境保护验收监测报告编制中常见的难点问题进行了剖析,并给出相应的解决办法。     

蚀刻废液中铜回收条件的选择及废液再利用

研究了中和法回收含铜蚀刻废液中的铜时pH值、温度及亚铜离子含量等因素对回收率的影响,给出了最佳沉淀工艺条件的选择方案。同时探讨了沉铜后母液中少量铜的回收方法及母液的再生利用方法。     

酸性蚀刻废液处理的试验研究

通过室内试验,比较置换、中和-置换及化学沉淀-电絮凝处理方法对废蚀刻液的处理效果.结果表明,化学沉淀-电絮凝工艺的处理效果最好,其适宜工艺条件为废蚀刻液pH=6 0～7 5、电絮凝电流密度50 mA/cm2和电絮凝作用15 min,此时COD和Cu2+的去除率分别达98 7%和99 98%.研究表明,经过化学沉淀-电絮凝工艺处理的酸性蚀刻废液可达到排放标准,同时化学沉淀过程中产生的沉淀物经处理后可得到硫酸铜产品.     

基于改进逼近理想解排序(TOPSIS)法的应急系统优化选址模型研究

通过分析影响应急系统选址的各种因素,建立衡量应急系统地址优劣的指标体系,并利用层次分析法确定各指标的权重。依据改进逼近理想解排序(TOPSIS)法的基本思路,建立应急系统优化选址模型。通过具体的实例说明,将改进TOPSIS法引入选址模型是解决应急系统优化选址问题的有效方法,是选址方法体系的一种创新思路。     

利用磷化渣配制复合磷化液

采用固体废物磷化渣配制成复合磷化液,并用所配制的复合磷化液对A3钢试件进行磷化处理,形成磷化膜。通过正交实验确定了配制复合磷化液的较佳配方为：磷化液基础液加入量0．2L／L、氧化锌加入量5g／L、碳酸钠加入量6g／L、硝酸加入量12．5mL／L、浓磷酸加入量2．5mL／L、硫酸铜加入量0．3g／L。复合磷化液为浅绿色透明溶液,pH为4．0,总酸度为40,游离酸度为10,磷化温度为65℃,磷化时间为300～600s。所形成的磷化膜厚度为16．0μm,单位质量为26．875g／m^2,粗糙度为1．425μm,维氏硬度为124．27kgf／mm^2。磷化膜硫酸铜点滴时间为35s,耐盐水时间为8h,耐盐雾时间为4h,其物理性质和耐蚀性能均较佳。     

Sustainable engineering education in the United States

Sustainable engineering is a conceptual and practical challenge to all engineering disciplines. Although the profession has experience with environmental dimensions of engineering activities that in some cases are quite deep, extending the existing body of practice to sustainable engineering by including social and cultural domains is a significant and non-trivial challenge. Nonetheless, progress is being made, as a recent study undertaken by the Center for Sustainable Engineering in the United States demonstrates.