What is an explosion? A case history of an investigation for the insurance industry

After a large property loss, the insured and insurers of a hydroelectric power plant in North America became embroiled in subrogation to determine if the event could be characterized as an explosion. The subject insurance policy provided coverage for explosions, but excluded mechanical breakdowns. Analysis by Exponent Failure Analysis Associates indicated that a consistent, cross-disciplinary definition for explosions can be extracted from published scientific literature, and that this incident was not an explosion because certain key requirements were missing during the accident. However, this investigation has highlighted the necessity for insurance companies and their insureds to better understand this term and thereby minimize future coverage disputes. This paper presents an analysis of this incident and describes the necessary characteristics of an explosion.     

Initial phase modelling in numerical explosion applied to process safety

The utilisation of computational fluid dynamics (CFD) in process safety has increased significantly in recent years. The modelling of accidental explosion via CFD has in many cases replaced the classical Multi Energy and Brake Strehlow methods. The benefits obtained with CFD modelling can be diminished if proper modelling of the initial phase of explosion is neglected. In the early stages of an explosion, the flame propagates in a quasi-laminar regime. Proper modelling of the initial laminar phase is a key aspect in order to predict the peak pressure and the time to peak pressure. The present work suggests a modelling approach for the initial laminar phase in explosion scenarios. Findings are compared with experimental data for two classical explosion test cases which resemble the common features in chemical process areas (confinement and congestion). A detailed analysis of the threshold for the transition from laminar to turbulent regime is also carried out. The modelling is implemented in a fully 3D Navier–Stokes compressible formulation. Combustion is treated using a laminar flamelet approach based on the Bray, Moss and Libby (BML) formulation. A novel modified porosity approach developed for the unstructured solver is also considered. Results agree satisfactorily with experiments and the modelling is found to be robust.     

Requirements for estimation of doses from contaminants dispersed by a ‘dirty bomb’ explosion in an urban area

The ARGOS decision support system is currently being extended to enable estimation of the consequences of terror attacks involving chemical, biological, nuclear and radiological substances. This paper presents elements of the framework that will be applied in ARGOS to calculate the dose contributions from contaminants dispersed in the atmosphere after a ‘dirty bomb’ explosion. Conceptual methodologies are presented which describe the various dose components on the basis of knowledge of time-integrated contaminant air concentrations. Also the aerosolisation and atmospheric dispersion in a city of different types of conceivable contaminants from a ‘dirty bomb’ are discussed.     

丁二烯自聚物的产生和预防

介绍了丁二烯自聚物的种类,分析了丁二烯自聚物的形成机理、产生条件和爆炸原因,归纳总结了预防丁二烯自聚物产生及丁二烯储存中的安全措施     

垃圾填埋场爆炸灾害的发生与控制途径

论述了垃圾填埋场爆炸灾害的严重性，探讨了垃圾填埋场爆炸灾害发生的影响因素。并以此提出了垃圾填埋场爆炸灾害的控制技术途径。     

The influence of the charge-to-mass ratio of the charged water mist on a methane explosion

To study the influence of the charge-to-mass ratio of a charged water mist on a methane explosion, the induction charging method was used to induce charge on a normal water mist; a mesh target method was employed to test the charge-to-mass ratio of its droplets. The propagation images, propagation average velocities, and overpressures of a methane explosion suppressed by charged water mist were analysed. The influence of the charge-to-mass ratio of the suppressant water mist on a methane explosion was studied. Results show that the explosion temperature, propagation average velocity, and peak overpressure deceased more obviously with charged water mist than ordinary water mist. With increasing charge-to-mass ratio, the suppression effect of the charged water mist underwent a significant increase. Under experimental conditions, compared with ordinary water mist, when the charge-to-mass ratio was 0.445 mC/kg and the mist flux was 4 L, the minimum flame propagation average velocity was 3.456 m/s, with a drop of 2.37 m/s (40.68%), and the peak overpressure of the methane explosion was 10.892 kPa, with a drop of 10.798 kPa (49.78%). The suppression effect is considered from the changes of the physico-chemical properties of the water mist as affected by the applied charge-to-mass ratio.     

A methodology to predict shock overpressure decay in a tunnel produced by a premixed methane/air explosion

A methodology for estimating the blast wave overpressure decay in air produced by a gas explosion in a closed-ended tunnel is proposed based on numerical simulations. The influence of the tunnel wall roughness is taken into account in studying a methane/air mixture explosion and the subsequent propagation of the resulting shock wave in air. The pressure time-history is obtained at different axial locations in the tunnel outside the methane/air mixture. If the shock overpressure at two, or more locations, is known, the value at other locations can be determined according to a simple power law. The study demonstrates the accuracy of the proposed methodology to estimate the overpressure change with distance for shock waves in air produced by methane/air mixture explosions. The methodology is applied to experimental data in order to validate the approach.     

硝化甘油生产系统的安全分析

对硝化甘油生产事故进行了综合统计分析,然后采用ＦＴＡ对硝化甘油生产过程的危险性作了详细的定性分析,并且根据分析结果提出了针对性的改进措施和安全注意事项     

Effects of acid rain on forest ecosystem in Southwestern China

The study of effects of acid rain in Southwestern China on forest ecosystems .has been inrestigated since 1984. The results have shown that the ecosystem of Pinus massoniana forest has been damaged severely by acid rain. Comparing the areas where the annual mean pH value is lower than 4.5 with that higher than 4.5, the productivity of the ecosystems decreased 50 percent. Both the percentages of the green leaves and the content of chlorophyll cut down; the acidity of soil increased a bit and the fertility showed the tendency to lower. The microbial population components in surface soil were changed and the total number of soil microbes reduced from 63.5 to 92.6 percent. Besides the direct effects of acid rain, the insect pest, especially, Blastophagus piniperdoz and Monochamus galloprovincialis, seized the opportunity to enter and reproduce in it so as to aggravate the forest dieback of P.massoniana in the areas where the annual average pH value is lower than 4.5.Additionally, the simulation study on the     

Explosion regions and limiting oxygen concentrations of methyl propionate,methyl acetate,dimethyl carbonate with air and inert gas mixtures

New data about explosion regions with special focus on limiting oxygen concentrations for methyl propionate, methyl acetate, dimethyl carbonate with air in the presence of nitrogen, helium and carbon dioxide were determined at ambient initial pressure and 423 K. The measurements were executed according to EN 1839 method T. The changes of the explosion regions with temperature and type of inert gas were also modeled mathematically using an extended calculated adiabatic flame temperature profile (CAFTP) method. The shift of the explosion region boundaries with temperature when switching from nitrogen to carbon dioxide were reproduced well. For a switch to helium a good agreement could be reached only if the very high thermal conductivity of helium had been considered properly by using the Lewis number. This requires the knowledge of the respective Lennard-Jones parameters. The LOC of helium-containing mixtures can, however, be calculated with acceptable accuracy even if the Lennard-Jones parameters of the flammable substance are not known exactly by using reasonable estimations.