Suitability of ignition source “exploding wire” for determination of dust explosion characteristics in the 20-L-sphere

Several safety characteristics of dusts are determined in the 20-L-sphere (also known as SIWEK Chamber) according to international standards. Dust cloud ignition is carried out using pyrotechnical igniters. Due to various disadvantages of such igniters the need for alternative ignition sources arises again and again. An alternative could be an ignition source which is known as “exploding wire” or “fuse wire”. The paper presents test results of a comparative study between both ignition sources for the determination of the safety characteristics “Maximum Explosion Pressure” and “Maximum Rate of Explosion Pressure Rise” of five selected dusts in the 20-L-sphere. In addition to that the ignition mechanisms of both ignition sources were analyzed by high speed camera recordings and the ignition energy was determined with electric and calorimetric recordings. The paper shows results of measurements of the ignition energy of both ignition sources as well as sequences of the flame propagation.     

A CFD based explosion risk analysis methodology using time varying release rates in dispersion simulations

A full probabilistic Explosion Risk Analysis (ERA) is commonly used to establish overpressure exceedance curves for offshore facilities. This involves modelling a large number of gas dispersion and explosion scenarios. Capturing the time dependant build up and decay of a flammable gas cloud size along with its shape and location are important parameters that can govern the results of an ERA. Dispersion simulations using Computational Fluid Dynamics (CFD) are generally carried out in detailed ERA studies to obtain these pieces of information. However, these dispersion simulations are typically modelled with constant release rates leading to steady state results. The basic assumption used here is that the flammable gas cloud build up rate from these constant release rate dispersion simulations would mimic the actual transient cloud build up rate from a time varying release rate. This assumption does not correctly capture the physical phenomena of transient gas releases and their subsequent dispersion and may lead to very conservative results. This in turn results in potential over design of facilities with implications on time, materials and cost of a project.In the current work, an ERA methodology is proposed that uses time varying release rates as an input in the CFD dispersion simulations to obtain the fully transient flammable gas cloud build-up and decay, while ensuring the total time required to perform the ERA study is also reduced. It was found that the proposed ERA methodology leads to improved accuracy in dispersion results, steeper overpressure exceedance curves and a significant reduction in the Design Accidental Load (DAL) values whilst still maintaining some conservatism and also reducing the total time required to perform an ERA study.     

Application and effect of negative pressure chambers on pipeline explosion venting

Explosion venting is a frequently-used way to lower explosion pressure and accident loss. Recently, studies of vessel explosion venting have received much attention, while little attention has been paid to pipe explosion venting. This study researched the characteristics of explosion venting for Coal Bed Methane (CBM) transfer pipe, and proposed the way of explosion venting to chamber in order to avoid the influence of explosion venting on external environment, and investigated the effects of explosion venting to atmosphere and chamber. When explosion venting to atmosphere, the average explosion impulse 4.89 kPa s; when explosion venting to 0 MPa (atmospheric pressure) chamber, average explosion impulse is 7.52 kPa s; when explosion venting to −0.01 MPa chamber, explosion flame and pressure obviously drop, and average explosion impulse decreases to 4.08 kPa s; when explosion venting to −0.09 MPa chamber, explosion flame goes out and average explosion impulse is 1.45 kPa s. Thus, the effect of explosion venting to negative chamber is far better than that to atmospheric chamber. Negative chamber can absorb more explosion gas and energy, increase stretch of explosion flame, and eliminate free radical of gas explosion. All these can promote the effect of explosion venting to negative chamber.     

Bi-directional connectivity diagram for accident propagation analysis considering the interactions between multiple-process units

An incident may propagate to an accident with different severity dependent on its propagation scenarios. Since the accident propagation is a two-way process, the current research is focusing on the one-way analysis. This paper aims to analyze the combined effect of multi-units sources and their interactions during the accident propagation. The bi-directional connectivity diagram (BDCD) is applied to visualize the interactions between multiple process units as hazardous sources. The deployed safety barriers interrupt the connection between the hazardous sources and thus minimize the influence of one BDCD node on another. Through which, the accident propagation is reduced. The proposed method can be suitable to the general accidents, and it is applied to a case study of the LNG terminal station to assess the potential consequences of explosion caused by the leakage, in which the cost of the safety barrier is also considered. The BDCD approach is found more effective than traditional single-hazardous source methods for analyzing the accident propagation of multi-units sources in the chemical plant and achieving intrinsic safety.     

Explosion regions of 1,3-dioxolane/nitrous oxide and 1,3-dioxolane/air with different inert gases - Experimental data and numerical modelling

In this study, experimental determination and modelling investigations for the explosion regions of 1,3-dioxolane/inert gas/N₂O and 1,3-dioxolane/inert gas/air mixtures were carried out and compared. The experimental measurements were carried out at 338 K and atmospheric pressure according to EN1839 method T using the inert gases N₂, CO₂, He and Ar. The results showed that the ratio of the lower explosion limit in N₂O (LEL_N2O) to the lower explosion limit in air (LEL_air) is 0.52 and the ratio of the maximum oxygen content in air (MOC_air) to the limiting oxidizer fraction in nitrous oxide (LOF_N2O) is 0.36 ± 0.02 independent of the inert gas. When comparing the inert gas amount at the apex based on the pure oxidizing component, which is O₂ in case of air, N₂O-containing mixtures need less inert gas to reach the limiting oxidizer quantity whereas the efficiency of inert gases is in the same order. The coefficients of nitrogen equivalency however were found to differ to some extent. The explosion regions of 1,3-dioxolane/inert gas/oxidizer mixtures were modelled using the calculated adiabatic flame temperature profile (CAFTP) method as well as corrected adiabatic flame temperatures. The results indicate good agreement with experimental data for CO₂, N₂ and Ar- containing mixtures. The noticeable deviations that occur when He is the inert gas are due to the lacking transport data of that mixture.     

Nex-Hys: minimum ignition temperature of hybrid mixtures

Although the minimum ignition temperature is an important safety characteristic and of practical relevance in industrial processes, actually only standard operation procedures are available for pure substances and single-phase values. Nevertheless, combinations of substances or mixtures are used in industrial processes and up to now it is not possible to provide a standardised minimum ignition temperature and in consequence to design a process safely with regard to the substances used.In order to get minimum ignition temperatures for frequently used hybrid mixtures, first, the minimum ignition temperatures and ignition frequencies were determined in the modified Godbert-Greenwald furnace for two single phase solids and a liquid substance. Second, minimum ignition temperatures and ignition frequencies were determined for several combinations as hybrid mixture of dust and liquid.In parallel to the determination of ignition temperatures a new camera and computer system to differentiate ignition from non-ignition is developed. First results are promising that such a system could be much less operator depended.By a high number of repetitions to classify regions of ignition the base is laid to decide about a new procedure for a hybrid standard and updating existing ones, too. This is one of the necessary aims to be reached in the Nex-Hys project.A noticeable decrease of minimum ignition temperatures below the MIT of the pure solids was observed for the one hybrid mixture tested, yet. Furthermore more widely dispersed area of ignition is shown. In accordance to previously findings, the results demonstrate a strong relationship between likelihood of explosion and amount of added solvent. In consequence the hybrid mixture is characterized by a lower minimum ignition temperature than the single dust.     

Modeling of explosion dynamics in vessel-pipe systems to evaluate the performance of explosion isolation systems

Explosion isolation systems provide critical protection for interconnected vessels and work areas, preventing the spread of explosions through interconnecting pipes and ducts. These systems not only prevent propagating events, but also mitigate the elevated explosion hazards of interconnected vessels, related to pressure piling and enhanced turbulence. Explosion isolation systems can, however, fail catastrophically when they are not properly designed for a use case.Evaluating the performance of explosion isolation systems includes assessing their pressure resistance, flame-barrier efficacy, and determining appropriate installation distances, which typically requires extensive testing. To predict the performance of a system for use cases outside the tested conditions, models are needed to reliably predict both the explosion dynamics and the isolation system response.In this study, a physics-based model for explosion dynamics in vented vessel-pipe systems is developed and validated. An extensive series of large-scale validation experiments were conducted, including tests using an 8 m³ vessel with attached pipes, varying the pipe dimensions, ignition location, and mixture reactivity. The model accurately captures the effects of experimental parameters and predicts the time available for isolation systems to form a flame barrier. This model can help to predict installation distances and reduce the number of tests needed to comprehensively evaluate explosion isolation systems and their use cases.     

Experimental study on the minimum explosion concentration of anthracite dust: The roles of O2 mole fraction,inert gas and CH4 addition

The explosion characteristics of anthracite coal dust with/without small amount of CH₄ (1.14 vol %) were investigated by using a 20 L spherical explosion apparatus with an emphasis on the roles of oxygen mole fraction and inert gas. Two methods based on overpressure and combustion duration time were used to determine the minimum explosion concentration (MEC) or the lower explosion limit (LEL) of the pure anthracite coal dust and the hybrid coal-methane mixtures, respectively. The experiment results showed that increasing oxygen mole fraction increases the explosion risk of coal dust: with increasing oxygen mole fraction, the explosion pressure (P_ex) and the rate of explosion pressure rise ((dp/dt)_ex)) increase, while MEC decreases. The explosion risk of anthracite dust was found to be lower after replacing N₂ with CO₂, suggesting that CO₂ has a better inhibition effect on explosion mainly due to its higher specific heat. However, the addition of 1.14% CH₄ moderates the inhibition effect of CO₂ and the promotion effect of O₂ on anthracite dust explosion for some extent, increasing explosion severity and reducing the MEC of anthracite dust. For hybrid anthracite/CH₄ mixture explosions, Barknecht's curve was found to be more accurate and conservative than Chatelier's line, but neither are sufficient from the safety considerations. The experimental results provide a certain help for the explosion prevention and suppression in carbonaceous dust industries.     

Propane-air mixture deflagration hazard with different ignition positions and restraints in large-scale venting chamber

In order to better assess the hazards of explosion accidents, propane-air mixture deflagrations were conducted in a large-scale straight rectangular chamber (with a cross-section of 1.5 m × 1.5 m, length of 10 m, and total volume of 22.5 m³). The effect of initial volume, ignition position, and initial restraints on the explosion characteristics of the propane-air mixtures was investigated. The explosion overpressure, flame propagation, and flame speed were obtained and the computational fluid dynamics (CFD) software was used to simulate the flame-propagation process and field flow for auxiliary analysis. The hazards of large-scale propagation explosion under weak and strong constraints were evaluated and the different phases of flame propagation under weak and strong constraints were discriminated. Results indicate that the hazards caused by propane deflagration under weak constraint are mainly caused by flame spread. And the maximum overpressure under strong constraint appeared at the front part of the chamber under the large-scale condition, which is consistent with the previous small-scale test. Moreover, the simulations of flame structures under weak and strong constraint are in good agreement with experimental results, which furthers the understanding of large-scale propane deflagration under different initial conditions in large-scale spaces and provides basic data for three-dimensional CFD model improvement.     

Spray and explosion characteristics of methanol and methanol-benzene blends near azeotrope formation: Effects of temperature,concentration, and benzene content

The explosion hazard of flammable liquids leaking to form spray in storage and transportation at ambient temperature has not been systematically investigated. This work presents new results from experimental investigations of the atomization and explosion characteristics of methanol, and methanol-benzene blends forming near the azeotrope under different initial conditions (initial temperature (298.15–318.15 K), methanol concentration (198–514.8 g/m³) and benzene content (41–81%)) in a 20-L spherical vessel. The empirical formulas for Sauter Mean Diameter (SMD) of the droplets and the maximum explosion pressure with respect to the initial temperature and methanol concentration were obtained from the quantitative analysis. Compared to the explosion hazard of pure methanol and methanol-benzene blends spray, the results showed that the maximum rate of pressure rise and maximum explosion temperature of methanol-benzene blends were relatively low. Furthermore, the effect of carbon soot formation on the explosion hazard during explosion development was analyzed.