Experimental study on explosion inhibition by heptafluoropropane and its synergy with inert gas

The inhibition effect of heptafluoropropane (CF₃CHFCF₃) on methane explosions under different inhibitor concentrations in a closed vessel was studied. A high-speed camera and a pressure sensor were adopted respectively to record flame propagation characteristics and pressure data. Results indicate that the relationship between flame propagation and pressure rising was correlated. As the equivalent ratio (ϕ)≤1, the pressure presented a trend of rising firstly and then decreasing with increasing CF₃CHFCF₃ concentration, and it was found that there existed a critical concentration for pressure decrease. As ϕ > 1, the pressure exhibited a decreasing trend. Although the pressure appeared to seemingly increase, the moment that the pressure began to rise (t_rise) and the moment that the maximum explosion overpressure appeared (t_Pmax) were obviously delayed. The average rate of pressure rise ((dP/dt)_ave) was decreased as the concentration of CF3CHFCF3 increased. It indicates that CF₃CHFCF₃ can effectively reduce the explosion reaction rate. The critical concentration of CF₃CHFCF₃ for complete inhibition was determined. Meanwhile, the synergy of CF₃CHFCF₃-inert gas can improve the inhibition effect. Compared with CF₃CHFCF₃–N₂, the synergy of CF₃CHFCF₃–CO₂ presented a better inhibition effect, and the inhibition effect was increased with increasing inert gas concentration. And the mechanisms of physical and chemical effects on explosion inhibition were analyzed.     

2016—2020年全国化工和危险化学品事故分析研究*

为分析“十三五”期间（2016—2020年）我国化工和危险化学品事故发生情况，统计“十三五”期间化工和危险化学品事故数量及死亡人数，从发生月份、发生区域、行业分布等方面分析事故特征，从事故类别、事故环节、关键作业等方面分析事故原因，总结2011—2020年我国化工和危险化学品事故发展趋势，按照全国4大经济区域研究2013—2020年事故特征。结果表明:“十三五”期间我国化工和危险化学品事故数量呈下降趋势，死亡人数出现波动，总体形势较为平稳。2011—2020年化工和危险化学品事故风险向中西部转移趋势明显，东北、西部地区事故死亡率普遍高于东部地区。研究结果可为相关行业从业者及监管部门提供决策参考。     

Evaluation of thermal reaction for two azo compounds by using 20-L apparatus and calorimetry

Azo compounds are widely involved in the industrial processes of dyes, pigments, initiators, and blowing agents. Unfortunately, these compounds have a bivalent unstable –NN– composition, which can be readily broken when the ambient temperature is elevated. Self-accelerating decomposition might cause a runaway reaction and lead to a fire, explosion, or leakage when the cooling system fails or other events occur. This study investigated the explosion properties, thermal stability parameters, and thermal hazard and mechanism of 2,2′–azobisisobutyronitrile (AIBN) and 2,2′–azobis–2–methylbutyronitrile (AMBN). We used a 20-L apparatus, vent sizing package 2, synchronous thermal analysis, and differential scanning calorimetry under explosive, adiabatic, and dynamic conditions to acquire the explosive curves, thermal curves, and thermodynamic parameters of the substances. Moreover, the differential isoconversional method (Friedman method) and ASTM E698 equation were employed to obtain the apparent activation energy E_a. All the experimental results revealed that AIBN is more dangerous than AMBN. The E_a of AIBN was lower than that of AMBN. The results can be used to construct an azo compound thermal hazard database for use for searches and reference examples by industry and related research areas.     

Explosion characteristics of micron- and nano-size magnesium powders

Explosion characteristics of micron- and nano-size magnesium powders were determined using CSIR-CBRI 20-L Sphere, Hartmann apparatus and Godbert-Greenwald furnace to study influence of particle size reduction to nano-range on these. The explosion parameters investigated are: maximum explosion pressure (P_max), maximum rate of pressure-rise (dP/dt)_max, dust explosibility index (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE), minimum ignition temperature (MIT), limiting oxygen concentration (LOC) and effect of reduced oxygen level on explosion severity. Magnesium particle sizes are: 125, 74, 38, 22, 10 and 1 μm; and 400, 200, 150, 100, 50 and 30 nm. Experimental results indicate significant increase in explosion severity (P_max: 7–14 bar, K_St: 98–510 bar·m/s) as particle size decreases from 125 to 1 μm, it is maximum for 400 nm (P_max: 14.6 bar, K_St: 528 bar·m/s) and decreases with further decrease of particle size to nano-range 200–30 nm (P_max: 12.4–9.4 bar, K_St: 460–262 bar·m/s) as it is affected by agglomeration of nano-particles. MEC decreases from 160 to 30 g/m³ on decreasing particle size from 125 to 1 μm, its value is 30 g/m³ for 400 and 200 nm and 20 g/m³ for further decrease in nano-range (150–30 nm). MIE reduces from 120 to 2 mJ on decreasing the particle size from 125 to 1 μm, its value is 1 mJ for 400, 200, 150 nm size and <1 mJ for 50 and 30 nm. Minimum ignition temperature is 600 °C for 125 μm magnesium, it varies between 570 and 450 °C for sizes 38–1 μm and 400–350 °C for size range 400–30 nm. Magnesium powders in nano-range (30–200 nm) explode less violently than micron-range powder. However, likelihood of explosion increases significantly for nano-range magnesium. LOC is 5% for magnesium size range 125–38 μm, 4% for 22–1 μm, 3% for 400 nm, 4% for 200, 150 and 100 nm, and 5% for 50 and 30 nm. Reduction in oxygen levels to 9% results in decrease in P_max and K_St by a factor of 2–3 and 4–5, respectively, for micron as well as nano-sizes. The experimental data presented will be useful for industries producing or handling similar size range micron- and nano-magnesium in order to evaluate explosibility of their magnesium powders and propose/design adequate safety measures.     

中国铀矿冶放射性污染防治"十三五"规划思路研究

首先从放射性废水、废石及尾矿、放射性废气、运输、退役及辐射环境管理等六个方面介绍了中国铀矿冶三废处理现状,分析了中国铀矿冶在放射性污染防治方面所存在的辐射安全状况依然严峻、环境保护技术滞后、退役治理存在较明显的局限性与片面性、铀矿冶标准体系有待完善、地下水污染与控制措施及其研究不够等问题,最后对"十三五"中国铀矿冶放射性污染防治提出了加快铀矿冶退役治理进程、加强铀矿冶废水处理技术研究工作、进一步加强铀矿山井下辐射防护工作、加快铀矿冶退役治理工程长期监护机制的出台、全面梳理铀矿冶法规标准体系的建议,以期为中国铀矿冶领域放射性污染防治提供科学的和系统的工作思路.     

人工湿地堵塞机理及防堵措施浅析及研究

人工湿地作为一种高效率、低投资、低运行费用、低能耗的污水处理技术,越来越受到世界各国的关注。随着人工湿地的不断推广与应用,堵塞是影响其应用和推广的主要因素之一。湿地发生堵塞后,基质的渗透系数会急剧下降,过水能力也随之降低,大量引入湿地系统的污水直接雍积在湿地表面,长期积水引发恶臭、导致蚊蝇滋生,恶化运行环境。本文通过对人工湿地运行过程中出现的填料堵塞机理与特点进行分析,归纳和总结了人工湿地堵塞的影响因素,提出了人工湿地堵塞相应的解决措施,提高人工湿地对污水的处理效果,以期能够为人工湿地的应用及推广提供参考。     

天津市＂十二五＂大气污染联防联控规划分析解读研究

天津市作为京津冀地区重要城市之一,经济迅速发展,环境空气质量保持稳定形势不容乐观。研究分析了‘‘十一五”期间天津市大气污染防治工作进展和环境空气质量变化趋势,探讨了未来天津市经济持续发展带来的能源消耗、机动车保有量及施工面积等的增加与大气复合污染防治面临的压力与挑战,提出了“十二五”期间大气污染防治对策与建议,重点涉及控煤、控尘、控车、加强保障等方面,为促进天津市经济可持续发展、持续改善环境空气质量起到指导作用。     

大型油库消防系统存在问题分析及预防

对某些油库消防系统存在的阀门泄漏、冬李稳高压系统投用、消防自动设施故障、泡沫液失效、设计规范问题进行了分析,提出要从施工质量、隐患整改、消防演练、维保检测4方面进行预防,保证消防系统在扑灭初期火灾时效能达到最优。     

三氯氢硅建设项目污染源分析与控制

三氯氢硅是制备多晶硅的重要原料,三氯氢硅极易挥发,在空气中易燃,并能与空气形成爆炸混合物,其化学性质很不稳定,遇水或水蒸气发生剧烈的放热反应,形成有毒的腐蚀性氯化氢烟雾;通过对三氯氢硅建设项目工艺流程及产污环节分析,探讨了该类项目生产过程废气、废水、噪声、固体废物等污染物的种类、成分及产生量,在此基础上提出了相应的污染控制措施,对该类项目环境影响评价工作有一定的指导作用。     

关于实施新修订《环境空气质量标准》的建议

针对新修订的《环境空气质量标准》,阐述了修订和实施《环境空气质量标准》的重要意义,并指出了新修订的《环境空气质量标准》与现行《环境空气质量标准》的主要区别,提出地级城市在实施新修订的《环境空气质量标准》过程中需做的准备工作和努力方向。