Modeling Postfire Response and Recovery using the Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS)1

Abstract: This paper investigates application of the Army Corps of Engineers’ Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS) to a burned watershed in San Bernardino County, California. We evaluate the HEC‐HMS’ ability to simulate discharge in prefire and postfire conditions in a semi arid watershed and the necessary parameterizations for modeling hydrologic response during the immediate, and subsequent recovery, period after a wildfire. The model is applied to City Creek watershed, which was 90% burned during the Old Fire of October 2003. An optimal spatial resolution for the HEC‐HMS model was chosen based on an initial sensitivity analysis of subbasin configurations and related model performance. Five prefire storms were calibrated for the selected model resolution, defining a set of parameters that reasonably simulate prefire conditions. Six postfire storms, two from each of the following rainy (winter) seasons were then selected to simulate postfire response and evaluate relative changes in parameter values and model behavior. There were clear trends in the postfire parameters [initial abstractions (I_a), curve number (CN), and lag time] that reveal significant (and expected) changes in watershed behavior. CN returns to prefire (baseline) values by the end of Year 2, while I_a approaches baseline by the end of the third rainy season. However, lag time remains significantly lower than prefire values throughout the three‐year study period. Our results indicate that recovery of soil conditions and related runoff response is not entirely evidenced by the end of the study period (three rainy seasons postfire). Understanding the evolution of the land surface and related hydrologic properties during the highly dynamic postfire period, and accounting for these changes in model parameterizations, will allow for more accurate and reliable discharge simulations in both the immediate, and subsequent, rainy seasons following fire.     

Pilot sample risk analysis for underground coal mine fires and explosions using MSHA citation data

After three decades of sustained continuous improvement of mine safety performances in the US, mine disasters in 2006 and 2007 compromised an excellent record and presented new challenges and vulnerabilities for the underground coal mining industry. In the aftermath of the incidents, formal investigations and new scrutiny of mine safety by the US Congress and expert study groups followed. The US Congress passed the Mine Improvement and New Emergency Response Act of 2006 (MINER Act), which mandated new laws to address the issues, including those related to mine fires and explosions from which miners must be protected. The National Mining Association-sponsored Mine Safety Technology and Training Commission report highlighted the role of risk analysis and management in identifying and controlling major hazards, such as fires and explosions. In this paper an approach is given for analyzing the risks for fires and explosions based on the Mine Safety and Health Administration citation database. Using 2006 citation data and focusing on subsystem failures, the methodology is applied to a database for a pilot sample of underground coal mines stratified by mine size and state.     

水体中高锰酸盐指数的流动注射分析方法

研究了用流动注射分析技术测定水体中高锰酸盐指数。使用新发明的耐腐蚀恒流泵、低记忆高效混合器、不存留气泡流通池等部件,通过高温高压,缩短消解时间,从而建立了一种可用于无人值守的自动在线快速监测水体中高锰酸盐指数的分析方法。     

大气固定污染源低浓度颗粒物采样及分析技术研究进展

简述了我国现阶段大气固定污染源颗粒物监测中遇到的问题及低浓度颗粒物采样与分析技术研究的必要性,归纳了国外低浓度颗粒物采样分析技术要点,包括大体积采样、滤筒上游采样设备堆积颗粒物的回收、有效称重步骤的确立等,并对我国开展低浓度颗粒物采样及分析技术研究提出了相关建议.     

Using data linkage to assess the impact of motorized recreational vehicle-related injuries in Ohio

Problem

Motorized recreational vehicle (MRV)-related injuries can result in severe medical and financial consequences. The objective of this study was to describe the epidemiology, and clinical and financial impact of MRV-related injuries in Ohio.

Method

Probabilistically linked statewide Emergency Medical Services (EMS) and hospital (inpatient and emergency department) data for 2003 and 2004 were examined. Record pairs with a MRV-related E-code (E821-E823, E825) were included in this study.

Results

There were 2,893 patients with MRV-related injuries, who had linked EMS and hospital records, resulting in more than $15 million in hospital charges and 1,921 inpatient days of hospitalization. The male-to-female ratio was nearly 4:1, and 19% were younger than 16. Almost 82% of cases were not wearing a helmet; there was a trend of decreasing helmet use with increasing age. Mean (SE) inpatient hospital charges and length of stay (LOS) were $22,218 ($1,290) and 3.8 (0.2) days, respectively. The mean (SE) Injury Severity Score (ISS) for inpatients was 9.2 (0.4). Individuals injured on a street/highway were 3.20 times more likely to sustain an ISS ≥ 16 (95% CI: 1.03, 9.88; p = 0.044) and 3.05 times more likely to sustain a traumatic brain injury (TBI) (95% CI: 1.17, 7.94; p = 0.024) than those who were injured at a place designated for sport or recreation. Children aged 12 to 15 and young adults aged 16 to 25 were 2.47 and 2.14 times more likely, respectively, to sustain a TBI than adults aged 36 or older (aged 12 to 15: 95% CI: 1.13, 5.38; p = 0.024; aged 16 to 25: 95% CI: 1.26, 3.64; p = 0.005). Higher ISS was associated with both higher total charges (p < 0.001) and longer LOS (p < 0.001).

Discussion

This study demonstrates that MRV-related injuries are an important public health problem in Ohio, with a substantial clinical and financial impact.

Impact on Industry

Enactment and enforcement of statewide MRV safety legislation and training of MRV users offer valuable opportunities to prevent these costly injuries.     

区域红壤资源信息系统的建立

将GIS技术与数学模型相结合,探讨区域红壤资源信息系统的建立与应用.在明确红壤资源信息系统研制的目的、任务与基本原则的基础上,进行系统的总体设计.划分系统的模块和确定系统的各个组成部分,并确定系统的软硬件配置、设计系统界面.建立空间数据库及多种分析与应用模型.     

跨界水体联合监测中总磷测定的问题探讨

研究了不同分析方法、去浊度手段和预处理方式对地表水总磷测定的影响。结果表明:钼酸铵分光光度法在跨界水体联合监测中较连续流动分析法、氯化亚锡还原光度法、孔雀绿-磷钼杂多酸分光光度法更为适用;在水样没有色度的情况下,采用浊度-色度补偿法和离心法都能有效消除浊度干扰,相对误差±10%;预处理方式的不同是导致各监测单位测定结果可比性差的最关键因素。     

Before the crash: A systematic analysis of police narratives to determine the prevalence of pre-crash factors in fatality road transport crashes

Abstract

Objectives: The objectives of this study were to identify the prevalence of pre-crash factors that were present in fatal road transport crashes for the deceased and counterpart road user.

Methods: The study is a retrospective population-based case series study of transport-related deaths reported to coroners in Australia from 2013 to 2016. Data was extracted from the National Coronial Information System.

Results: In total, 6,137 fatality crashes occurred during the study period. Police reports were available for 5,523 crashes (89.9%). The most frequently reported pre-crash factors reported behaviour specifically drivers (e.g., driving without a license or while license was disqualified). Presence of intoxicating substances were also reported in the deceased and counterparts. Analyses of toxicology reports are continuing to determine if rates are comparable to level of use in community.

Conclusions: Coronial report provide detailed information that may be pertinent to understanding and potentially preventing crashes. Also emerging from the data is the extent of pre-crash factors that relate to illegal or deviant behavior and whether these are contextual or contributory factors.     

Double Green Process: a low environmental impact method for recycling of CdTe,a-Si and CIS/CIGS thin-film photovoltaic modules

On the basis of the method for managing the end of life of CdTe photovoltaic panels previously proposed by the authors, a new method for the recycling of all types of thin-film panels (CdTe, a-Si and CIS/CIGS) has been developed and optimised under a research project founded by Enel Foundation and CRUI Foundation. The DGP process has been developed through a feasibility study carried out from three points of view: technical, environmental and economic. The process is composed by two sub-processes matched to each other, one suitable for CdTe panels (named DGPa) and the other one for a-Si and CIS/CIGS panels (DGPb). The Double Green Panel process is based mainly on mechanical treatments with a minimum use of chemicals and it is characterised by a greater level of automation and a high flexibility in production capacity. The potential environmental impacts of various configurations of the DGP process have been extensively analysed with LCA tool in order to develop an environmentally friendly process. The economic feasibility has been assessed through the Discounted Cash Flow Analysis (DCFA) method. The revenues associated to the recovery of valuable and common materials and the recycling costs have been taken into account.     

CO2 emission driving forces and corresponding mitigation strategies under low-carbon economy mode: evidence from China’s Beijing–Tianjin–Hebei region

On account of the background of China’s “new normal” characterized by slower economic growth, this paper analyses the low-carbon economy status quo in the Beijing–Tianjin–Hebei region and empirically investigates the relationship between carbon dioxide (CO₂) emissions and its various factors for China’s Beijing–Tianjin–Hebei region using panel data econometric technique. We find evidence of existence of Environmental Kuznets Curve. Results also show that economic scale, industrial structure, and urbanization rate are crucial factors to promote CO₂ emissions. However, technological progress, especially the domestic independent research and development, plays a key role in CO₂ emissions abatement. Next, we further analyze the correlation between each subregion and various factors according to Grey Relation Analysis. Thereby, our findings provide important implications for policymakers in air pollution control and CO₂ emissions reduction for this region.