MSBR法处理焦化废水

焦化废水成分复杂,是一种较难处理的工业废水.试验采用MSBR法对其进行处理,考察了5组水力停留时问(66h,39h,28 h,20 h,17 h)下不同反应阶段(厌氧池、缺氧池、好氧池、SBR出水)对水样的处理效果.结果显示,HRT总为66h条件下.CODCr去除率为82%,效果相对最好,并且每组HRT下焦化废水中的CODCr均是在 MSBR系统前置的厌/缺氧池(A2)已得到大幅度去除.但硝化作用受到抑制,NH3-N的去除效果并不明显.     

Development of a highly sensitive extractive spectrophotometric method for the determination of nickel(II) from environmental matrices using N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone

Nickel(II) reacts with N-ethyl-3-carbazolecarboxaldehyde-3-thiosemicarbazone (ECCT) and forms a yellow colored complex, which was extracted into n-butanol from sodium acetate and acetic acid buffer at pH 6.0. The absorbance value of the Ni(II)-ECCT complex was measured at different intervals of time at 400nm, to ascertain the time stability of the complex. The extraction of the complex into the solvent was instantaneous and stable for more than 72h. The system obeyed Beer's law in the concentration range of 1.2-5.6mugml(-1) of nickel(II), with an excellent linearity and a correlation coefficient of 0.999. The molar absorptivity and Sandell's sensitivity of the extracted species were found to be 1.114x10(4)Lmol(-1)cm(-1) and 5.29x10(-3)mugcm(-2) at 400nm, respectively. Hence, a detailed study of the extraction of nickel(II) with ECCT has been undertaken with a view to developing a rapid and sensitive extractive spectrophotometric method for the determination of nickel(II) when present alone or in the presence of diverse ions which are usually associated with nickel(II) in environmental matrices like soil and industrial effluents. Various standard alloy samples (CM 247 LC, IN 718, BCS 233, 266, 253 and 251) have been tested for the determination of nickel for the purpose of validation of the present method. The results of the proposed method are comparable with those from atomic absorption spectrometry and were found to be in good agreement.     

Scenario-visualization for the assessment of perceived green space qualities at the urban-rural fringe

The provision of green space is increasingly being perceived as an important factor for quality of life. However, green spaces often face high developmental pressure. The main objective of this study is to investigate a prospective approach to green space planning by combining three-dimensional (3D) visualization of green space scenarios and survey techniques to facilitate improved participation of the public. Aside from the ‘Status quo’, scenarios ‘Agriculture’, ‘Recreation’, ‘Nature conservation’ and ‘Wind turbines’ are visualized in three dimensions. In order to test responses, a survey was conducted both in print format and on the Internet. Overall, 49 different visualizations that belong to one of the scenarios were available in the survey and were rated according to the perceived esthetic, recreational and ecological values.The highest rated scenes include vegetation elements such as meadows with orchards, single trees, shrubs or forest. The least attractive scenes are those where buildings are highly dominant or where there are no vegetation elements.Based on the ratings for the individual images and on the corresponding scenarios, our study shows that there is high potential for improving the existing landscape. All suggested changes are either rated about equal to or considerably higher than the status quo, with the scenario ‘Nature conservation’ receiving the highest scores.     

Co3O4/介孔分子筛催化剂对苯催化完全氧化的研究

分别以介孔分子筛MCM-41、MCM-48、SBA-15为载体,采用等体积浸渍法制备了氧化钴/介孔分子筛催化剂,利用N₂吸附、X射线衍射、程序升温还原等技术对催化剂进行了表征,考察了Co₃O₄的负载量及载体的孔结构对催化剂完全催化氧化苯的性能的影响。结果表明,Co₃O₄的负载量为20%时,催化剂的催化活性最好;载体的孔径和催化剂的可还原性能是影响催化活性的主要因素,催化剂活性顺序为Co₃O₄ /SBA-15> Co₃O₄ /MCM41> Co₃O₄ /MCM-48。     

大气光化学烟雾反应机理比较(Ⅰ)O3和NOx的比较

在相同初始和排放条件下,对四种应用较广的光化学烟雾反应机理(CB4-99,RADM2,RACM,SAPRC99)进行了比较.研究发现对于O3,在低VOCs/NOx时,四种机理模拟结果相关较小,平均相对标准偏差为7%,在高VOCs/NOx时,平均相对标准偏差为26%,差距较大;对于NOx,多数情况下RACM和RADM2的模拟结果较高,CB4-99和SAPRC99的模拟值偏低,其原因主要来源于不同机理中O3的生成对NOx及VOCs的敏感性不同而造成的.在用模式模拟O3和NOx时,应特别注意机理不同而带来的模拟结果差异.     

碳包覆Pd/Al2O3催化剂催化4-溴苯酚加氢脱溴的活性和稳定性调控研究

在污染物液相催化加氢脱卤过程中,提高催化剂的稳定性至关重要.以水热合成法制备了不同碳包覆量的Pd/Al₂O₃@C催化剂,对催化剂进行了系列表征,并将催化剂应用于4-溴苯酚(4-BP)污染物的催化加氢脱溴反应.表征结果显示碳层提高了Pd/Al₂O₃的表面疏水性,有利于4-BP在催化剂上的吸附.并且在Pd/Al₂O₃@C催化剂的碳化过程中,碳还原部分Pd颗粒,并保留部分正价态Pd活性位,增强了4-BP中C-Br键的活化.与Pd/Al₂O₃相比,碳涂层提高了催化剂的催化活性.但当碳包覆量超过最佳包覆量后,暴露的Pd粒子随碳包覆量的增加而减少,导致活性下降.此外,碳层修饰后,催化剂的稳定性显著提高,从而大大抑制了Pd粒子的团聚和损耗.Pd/Al₂O₃@C表面的碳涂层对卤素具有较高的耐受性,从而减轻了液相催化加氢脱卤反应中活性中心的中毒.     

富氧空位/梯次结构CeO2的制备及光催化CO2还原

采用Ce-BTC(均苯三甲酸)为模板,通过尿素溶液浸渍合成了具有富氧空位/梯次结构的CeO₂催化剂,并用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、拉曼光谱(Raman)和紫外可见漫反射(DRS)等手段对其进行了表征.结果表明,与金属有机框架(MOFs)浸渍尿素高温煅烧可以获得金属氧化物/g-C₃N₄复合材料不同,Ce-BTC/尿素体系煅烧后产品中未检测到g-C₃N₄,这可能与CeO₂的存在抑制了尿素分解产物的热缩聚过程,影响了g-C₃N₄的生成有关,但尿素的引入改变了Ce-BTC煅烧产物CeO₂的氧空位浓度,且获得梯次结构.将具有富氧空位/梯次结构的CeO₂-5用于光催化CO₂还原,催化结果表明:反应4h的CO产率可达2.06μmol/g,CH₄产率可达1.42μmol/g,性能是Ce-BTC未...     

固相萃取-GC/MS法测定地表水中3-甲基吲哚

采用微球硅胶键合C_(18)固相萃取柱萃取水样中的3-甲基吲哚,并用气质联用法测定,方法在0 mg/L~10.0 mg/L范围内线性良好,方法检出限为0.2μg/L。空白水样3个质量浓度水平的加标回收率为89%~94%,7次测定结果的RSD为2.3%~6.9%。用该方法测定7个实际地表水样品,其中4个地表水样品检出3-甲基吲哚,地表水样的加标回收率为81.5%~97.0%。     

臭氧前体物排放清单相关模型及应用

欧美等国家对于O_3污染的研究开展较早,已建立较成熟的O_3污染生成、扩散及空气质量等模型。文章主要介绍评述了美国环保局推荐使用的计算O_3前体物的相关模型(MOVES、NONROAD、SMOKE、EMFAC和EDMS),从基本原理和功能、污染源类型、研究尺度、所需参数等方面对比分析各模型的特点和适用范围,并综述其国内外研究应用情况;讨论了中国在这些模型的使用方面应该注意的问题,如加强开展模型计算结果验证和基础实验获得本土化的模型参数,以及中国开发的相关模型的优势和适用性等。     

上海市臭氧污染时空分布及影响因素

分析2006—2016年上海市的监测数据发现,臭氧(O_3)浓度存在逐年上升趋势,污染持续时间有所增加,但除水平风速有下降趋势外,其他相关气象因素的年际变化趋势并不显著。空间分析结果表明,上海市O_3超标主要集中在西南部郊区,但市区O_3超标潜势不容忽视。O_3污染高发季节的污染玫瑰图分析发现,上海市南部地区是影响上海市O_3污染的关键区域;对于NO_2减排的影响分析发现,尽管上海市O_3平均浓度总体处于上升趋势,但在NO_2下降幅度最为明显的内环市区和北部郊区,O_3上升幅度低于NO_2下降幅度较小的内外环区域和西部郊区,表明上海市的O_3污染控制仍需持续推进NOx的减排,并同步推进VOCs的减排。