涂装行业危险危害及其解决办法

分析了涂装行业存在的主要危险危害,如火灾爆炸、毒物危害、粉尘危害、静电危害和噪声危害等,指出了目前存在的问题,从宏观上提出了解决这些问题的办法。     

信息量模型在地质灾害调查与区划中的应用研究

以浙江省仙居县地质灾害调查与区划项目为例,在分析当地实际地质情况的基础上结合信息论原理,对仙居县进行了基于多因素分析的地质灾害预测区划。经分析计算．得出的区划结果基本符合仙居县的实际情况。故用信息量模型进行地质灾害区划是可行的。     

Thermal hazard accident investigation of hydrogen peroxide mixing with propanone employing calorimetric approaches

Hydrogen peroxide (H₂O₂), historically, due to its broad applications in the chemical industries, has caused many serious fires and explosions around the world. Its thermal hazards may also be incurred by an incompatible reaction with other chemicals, and a runaway reaction may be induced in the last stage. This study applied thermal analytical methods to explore the H₂O₂ leading to these accidents by incompatibility and to discuss what might be formed by the upset situations. Thermal hazard analysis contained a solvent, propanone (CH₃COCH₃, so-called acetone), which was deliberately selected to mix with H₂O₂ for investigating the degree of thermal hazard. Differential scanning calorimetry (DSC) and vent sizing package 2 (VSP2) were employed to evaluate the thermal hazard of H₂O₂. The results indicated that H₂O₂ is highly hazardous while mixed with propanone, as a potential contaminant. The time to maximum rate (TMR) was used as emergency response time in the chemical industries. Therefore, TMR of H₂O₂ was calculated to be 70 min for runaway reaction (after T₀) and TMR of H₂O₂/propanone was discovered to be 27 min only. Fire and explosion hazards could be successfully lessened if the safety-related data are properly imbedded into manufacturing processes.     

化工园区定量风险评价中危险源初选方法的研究

在进行化工园区定量风险评价中,危险源的梳理和筛选是首要步骤。分析了欧盟ARAMIS方法、荷兰PURPLE BOOK方法和新西兰的HFSP方法在危险源初选中的适用性,指出对于区域危险源初选用HFSP方法可以全面考虑区域中的各类危险源,快速准确地对危险源进行排序,并提出了HFSP方法用于区域危险源初选的调整方法,给出了危险设施单元的定义和进行QRA的选择判据。     

火灾下匀质防火保护钢构件温度计算(Ⅰ):理论与公式

介绍了火灾下有匀质防火层保护的钢构件温度计算的一维传热模型。给出了求解该模型的相关边界条件和假定,并给出求解该一维传热模型在不同边界条件下的解。通过分析三种典型防火材料保护下、截面系数不同的三种截面的升温,比较了由我国规范CECS200、欧洲规范、欧钢协标准、美国规范及其他学者推荐的方法得到的结果,并对照有限元结果,考察了不同计算方法的有效性。结果表明,CECS200与国外规范给出的结果符合良好且略微偏高。通过计算典型截面在不同耐火极限要求下的最小保护层厚度,比较了各国规范的设计结果。结果显示,由不同规范推荐的公式计算得到的最小保护层厚度相差不大。CECS200计算的最小保护层厚度与国外规范一致,与欧洲规范得到的结果基本相同。研究表明,在标准火灾环境中我国规范给出的方法合理有效且形式简单便于工程运用。     

作业场所职业病危害因素检测与评价信息化管理系统的应用

通过应用信息化网络技术,建立了作业场所职业病危害因素检测与评价数据库,实现了用人单位作业场所有害因素检测与评价数据的申报、传递、编制、审核、报告打印、统计等功能。信息化模板的建立,降低了职业卫生学调查工作难度,方便了检测方案和报告编辑,统一了作业场所职业病危害因素检测与评价报告书生成格式,并自动生成职业病危害因素检测与评价报告书,提高了作业场所职业病危害因素检测与评价工作的质量。本系统具有操作简易、处理功能强大、内部监督管理完善等特点,实现作业场所职业病危害因素检测与评价信息管理科学化、规范化、信息化,降低了劳动强度,提高了工作效率,有很好的应用价值,尤其适合现阶段基层职业卫生工作的需要。     

Fire risk reduction through a community‐based risk assessment: reflections from Makola Market,Accra, Ghana

This paper explores the level of vulnerability to the hazard of fire that exists in Makola Market in Accra, Ghana, and assesses how this threat can be reduced through a community‐based risk assessment. It examines the perceptions of both market‐stall occupants and primary stakeholders regarding the hazard of fire, and analyses the availability of local assets (coping strategies) with which to address the challenge. Through an evaluation of past instances of fire, as well as in‐depth key stakeholder interviews, field visits, and observations, the study produces a detailed hazard map of the market. It goes on to recommend that policymakers consider short‐to‐long‐term interventions to reduce the degree of risk. By foregrounding the essence of holistic and integrated planning, the paper calls for the incorporation of disaster mitigation measures in the overall urban planning process and for the strict enforcement of relevant building and fire safety codes by responsible public agencies.     

Numerical simulation of small-scale pool fires of LNG

Liquefied natural gas (LNG) has been largely indicated as a promising alternative solution for the transportation and storage of natural gas. In the case of accidental release on the ground, a pool fire scenario may occur. Despite the relevance of this accident, due to its likelihood and potential to trigger domino effects, accurate analyses addressing the characterization of pool fires of LNG are still missing.In this work, the fire dynamic simulator (FDS) has been adopted for the evaluation of the effects of the released amount of fuel and its composition (methane, ethane, and propane), on the thermal and chemical properties of small-scale LNG pool fire. More specifically, the heat release rate, the burning rate, the flame height, and thermal radiation, at different initial conditions, have been evaluated for pool having diameter smaller than 10 m. Safety distances have been calculated for all the investigated conditions, as well.Results have also been compared with data and correlations retrieved from the current literature. The equation of Thomas seems to work properly for the definition of the height over diameter ratio of the LNG pool fire for all the mixture and the investigated diameters.The addition of ethane and propane significantly affects the obtained results, especially in terms of radiative thermal radiation peaks, thus indicating the inadequacy of the commonly adopted assumption of pure methane as single, surrogate species for the LNG mixture.     

Effect of admixture of solid inertant on fire hazard of dust layers oriented at varying degrees of inclination

Unlike metallic dust layers, the layer flammability levels (LFL) of non-metallic dust layers exhibit a wide range from Class 1 (No self-sustained combustion) to Class 6 (explosive combustion). However, determinations of layer flammability have not considered the effect of inclination angle, thereby potentially underestimating fire hazard of combustible dust layers in many industrial situations. In this research, inclined dust layers showed greater fire hazard than did horizontally oriented dust layers. For example, LFL of wood dust jumped from class 3 to class 5 when layers were positioned with an incline. Flame spread rate of PMMA dust layers increased from 1.8 to 3.6 mm/s when the angle of inclination increased from 0 to 40°. Even small amounts of solid inertant significantly decreased surface layer fires. The required amount of inertant to completely inert layer fires was far less than that for smoldering layer fires or dust explosions.     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.