不同边沿高度油池火燃烧行为的实验和数值模拟研究

采用实验和FDS数值模拟相结合的方法,探讨了边沿高度对油池火燃烧特性的影响。在实验部分,研究了燃烧速率和表观火焰高度随边沿高度的变化趋势,并分别分析了各个阶段的热反馈机制。在实验获得不同尺度、边沿高度正庚烷油池火燃烧速率的前提下,建立相应尺度的不同边沿高度油池火的Fire Dynamics Simulator(FDS)计算模型以针对火焰高度进行了数值模拟研究,分析了实际火焰高度、火焰下探高度随边沿高度的变化趋势,并提出了相关的无量纲拟合式。     

移动通信基站的环境电磁辐射测量与分析

选择设于上海市区及郊区的５座典型移动通信基站，对其一半电磁波辐射强度进行了规范布点监测经数据计算分析及与国家有关电磁辐射防标准比较认为，移动基站周围环境中是磁辐射强度随着离基站天线距离增加大而减少小，在人群可能到达的距天线最近的地方，辐射水平最大值为１．５Ｖ／ｍ，未超过国家标准限值。     

Deposition of gamma emitters from Chernobyl accident and their transfer in lichen–soil columns

Lichen–soil column samples were taken from several locations in the Southern Finland between 1986 and 2006. Columns were divided into three parts, upper lichen, lower lichen and underlying soil, and their gamma emitting radionuclides, ¹³⁴Cs, ¹³⁷Cs, ¹⁰³Ru, ⁹⁵Zr, ¹⁰⁶Ru, ^110mAg, ¹²⁵Sb and ¹⁴⁴Ce, were measured with gamma spectrometry. Deposition values were calculated as Bq/m² for each sampling site. Distribution of various radionuclides in the three compartments as a function of time was determined. Both effective and ecological half-lives of all radionuclides were calculated for upper lichen, whole lichen and whole lichen–soil column. A linear relation was derived between the physical half-lives and effective half-lives for whole lichen and for whole lichen–soil column. Reindeer meat activity concentrations of various radionuclides and ensuing radiation doses to reindeer-herding people were also estimated for a hypothetical case where a similar high radioactive pollution, as was taken place in the Southern Finland, would have occurred in the reindeer-herding areas in the Finnish Lapland.     

Experimental investigation on extinguishing performance of a novel nanocomposite for gaseous fires

A novel nanocomposite was synthesized by incorporating three different types of flame-retardants and its extinguishing performance was tested for gaseous fires. The nanocomposite consists of the inorganic magnesium hydroxide (MH) nanoparticles as the dominant component, the nitrogen-based melamine cyanurate (MCA), and the phosphorus-based ODOPB. The wet mixing, dry mixing, and ultrasonic agitation were employed in the preparation process to enhance the homogeneity of the nanocomposite. The prepared powders were characterized using a series of analytical instruments including X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravity analyzer (TGA), and differential scanning calorimeter (DSC). The efficiency of various samples in extinguishing gaseous fires was investigated in a lab-scale extinguishing system. The fire extinguishing tests indicated that the nanocomposite is considerably more effective in fire extinguishing than other powders in terms of extinction time and agent mass consumed. The fire extinction time of nanocomposite was 45.2% shorter than that of commercial ABC-MAP powder. Furthermore, the consumed amount of nanocomposite was 63.2% less than that of commercial powder. In addition, the order of extinguishing mass concentrations was as follows: the novel nanocomposite (103.7 g/m³) < MH/MCA (148.1 g/m³) < MH/ODOPB (155.6 g/m³) < MH (170.4 g/m³) < commercial ABC powder (281.5 g/m³) < MCA/ODOPB (384.1 g/m³). The fire suppression mechanisms of the nanocomposite were also discussed. It was inferred that the extinguishing mechanism of nanocomposite comprised of simultaneous chemical and physical inhibition actions involving chemical inhibition action, cooling action, and asphyxiation action. This study provides a promising attempt to gain benefits from the striking features of nanotechnology and flame-retardants in extinguishing gaseous fires.     

The evolution of flame length for the oil tank fire with different top cover widths and lip heights

This study presents a quantitative analysis and interpretation of the variation in oil tank fire flame lengths for different oil tank sizes, top cover widths, and horizontal air flow velocities. The experimental results show that, at first, the flame length rises slowly with an increase in air flow speed. Then, once over a critical speed (0.6 m/s), the flame length decreases significantly with a further increase in air flow speed. Based on the characteristic length, a new dimensionless heat release rate is obtained, allowing the correlation between flame length, air flow speed, and dimensionless heat release rate to be calculated, which can be used to predict the flame length of an oil tank fire under different air flow speeds, lip heights, and cover widths.     

燃烧假人测试系统及其应用前景

燃烧假人测试系统是国际公认的定量评估防护装备阻燃性能的专用设备，本文主要介绍了燃烧假人测试系统的研究现状、系统构成、技术体系及应用前景。     

气相色谱——火焰光度法测定废水中黄磷的方法研究

研究了以苯为萃取剂，用气相色谱－－火焰光度法测定废水中的微量黄磷。结果色谱分离良好，萃取率大于９４％，水样易于保存，溶剂和杂质不干扰测定，水样加标回收率大于８８．４８％，精密度重复测定的变异系数不大于３．２％，定性检出限为２μｇ／Ｌ，定性检出限为６μｇ／Ｌ。     

PBDF and PBDD from the combustion of bromine containing flame retarded polymers: A survey

The formation of polybrominated dibenzofurans (PBDF) and dibenzodioxins (PBDD) during the pyrolysis of different polymers containing brominated organic flame retardants was investigated. The pyrolyses were conducted at two different temperatures (600°C and 800°C) using three different oven configurations. Both the pyrolysis gases and the solid residues were analysed for PBDF and PBDD.

PBDF were found in almost all samples, but both the concentration and the degree of bromination varied greatly. The largest yields of PBDF in the percent range were measured in the pyrolysis products of polymers containing brominated diphenyl ethers. The other flame retardants generally yielded only a few ppm of PBDF. PBDD are formed only in a few samples and related to the PBDF in very low concentrations.     

多因素下小尺度油罐火火焰倾角的研究

以柴油为研究对象,搭建了小尺度油罐火实验台,采用理论分析与实验研究相结合的方法,开展了有风条件下不同液位深度和罐顶开口宽度的小尺度油罐火火焰倾角的实验研究。结果表明,火焰倾角随风速的增加先迅速增加,然后趋于平稳。在相同的罐顶开口宽度和风速条件下,火焰倾角随着液位深度的增加呈现出减小的趋势。这是因为火焰微元在油罐开口处的速度随着液位深度的增加而增加,风速对火焰倾角的影响显著减小。当风速和液位深度一定时,质量损失速率随罐顶开口宽度的增大而增大,火焰倾角随着罐顶开口宽度的增大逐渐减小。     

Effect of ignition position on vented hydrogen–air deflagration in a 1 m3 vessel

This study investigates the effect of the ignition position on vented hydrogen-air deflagration in a 1 m³ vessel and evaluates the performance of the commercial computational fluid dynamics (CFD) code FLACS in simulating the vented explosion of hydrogen-air mixtures. First, the differences in the measured pressure-time histories for various ignition locations are presented, and the mechanisms responsible for the generation of different pressure peaks are explained, along with the flame behavior. Secondly, the CFD software FLACS is assessed against the experimental data. The characteristic phenomena of vented explosion are observed for hydrogen-air mixtures ignited at different ignition positions, such as Helmholtz oscillation for front ignition, the interaction between external explosion and combustion inside the vessel for central ignition, and the wall effect for back-wall ignition. Flame-acoustic interaction are observed in all cases, particularly in those of front ignition and very lean hydrogen-air mixtures. The predicted flame behavior agree well with the experimental data in general while the simulated maximum overpressures are larger than the experimental values by a factor of 1.5–2, which is conservative then would lead to a safe design of explosion panels for instance. Not only the flame development during the deflagration was well-simulated for the different ignition locations, but also the correspondence between the pressure transients and flame behavior was also accurately calculated. The comparison of the predicted results with the experimental data shows the performance of FLACS to model vented mixtures of hydrogen with air ignited in a lab scale vessel. However, the experimental scale is often smaller than that used in practical scenarios, such as hydrogen refueling installations. Thus, future large-scale experiments are necessary to assess the performance of FLACS in practical use.