Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

Numerical study on premixing characteristics and explosion process of starch in a vertical pipe under turbulent flow

Fire and explosion accidents are frequently caused by combustible dust, which has led to increased interest in this area of research. Although scholars have performed some research in this field, they often ignored interesting phenomena in their experiments. In this paper, we established a 2D numerical method to thoroughly investigate the particle motion and distribution before ignition. The optimal time for the corn starch dust cloud to ignite was determined in a semi-closed tube, and the characteristics of the flame propagation and temperature field were investigated after ignition inside and outside the tube. From the simulation, certain unexpected phenomena that occurred in the experiment were explained, and some suggestions were proposed for future experiments. The results from the simulation showed that 60–70 ms was the best time for the dust cloud to ignite. The local high-temperature flame clusters were caused by the agglomeration of high-temperature particles, and there were no flames near the wall of the tube due to particles gathering and attaching to the wall. Vortices formed around the nozzle, where the particle concentration was low and the flame spread slowly. During the explosion venting, particles flew out of the tube before the flame. The venting flame exhibited a “mushroom cloud” shape due to interactions with the vortex, and the flame maintained this shape as it was driven upward by the vortex.     

Large eddy simulation and experimental study of the effect of wire mesh on flame behaviours of methane/air explosions in a semi-confined pipe

Preventing the propagation of flames in a pipeline is an effective measure for avoiding gas explosion accidents and reducing losses. To evaluate the effect of wire mesh, acting as a porous media, experimental and simulation studies are conducted to determine the influence of the wire mesh on the dynamics of premixed methane/air flame propagation in a semi-closed pipe. Four different kinds of wire mesh with different numbers of layers are chosen in the experiments and simulation, and the mechanism of wire mesh quenching of the flame is investigated. The experimental and simulation results are consistent. Flames are quenched when 4 layers of 40-mesh or 3 layers of 60-mesh wire mesh are used; however, once the flame propagates through the wire mesh, the risk of methane combustion may increase. The wire mesh becomes the key factor causing flame folds and acceleration, and the greater the number of layers or the larger the mesh size is, the more obvious the folds after the flame passes through the wire mesh. Moreover, the combination of heat absorption and disruption of the continuous flame surface by the mesh causes flame quenching. Wire mesh can effectively attenuate the flame temperature during premixed flame propagation in a pipe, and the attenuated maximum rate reaches approximately 79% in the case of adding 3 layers of 60-mesh wire mesh.     

基于红外热成像的隧道火焰检测技术研究

精准的火焰检测是有效避免火灾发生的关键,针对传统的火灾探测算法在公路隧道等大空间环境中存在及时性与准确性相互制约的问题,通过研究隧道火焰初期在图像中呈现的静态和动态特征,提出了一种基于红外热成像的公路隧道火灾初期火焰检测方法。利用温度阈值获取疑似火焰区域,根据红外图像在引导滤波器作用下降噪,同时利用区域增长法分割疑似火焰区域;从疑似区域中提取的特征值构成特征向量,进行数据归一化提高SVM收敛速度;利用人工蜂群算法优化参数。结果表明：ABC-SVM能够实现公路隧道火灾初期的火焰识别,检测正确率相较于RBF方法提升了2.26%,运行时间缩短了2.29 ms;检测正确率相较于SVM方法提升了0.87%,运行时间缩短了2.22 ms。本方法可以对初期隧道火灾进行快速、有效检测,并有良好的环境适用性。     

火焰原子吸收光谱法测定畜禽粪便中铜和锌

采用冻干法-全量酸消解-火焰原子吸收光谱法测定畜禽粪便中铜和锌,优化了试验条件.铜和锌分别在0 mg/L～3.00 mg/L和0 mg/L～1.00 mg/L范围内线性良好,检出限分别为6 mg/kg和2 mg/kg(按取0.5 g试样消解定容至50 mL计算),粪便试样测定的RSD分别为1.3%和3.7%,加标回收率分别为104%和107%.     

改性沸石分离富集-火焰原子吸收光谱法测定长江水中镉

采用改性沸石分离富集-火焰原子吸收光谱法测定长江水中微量镉,优化了富集和洗脱条件,讨论了干扰离子的影响。方法在0μg~4.00μg范围内线性良好,检出限为0.214μg/L,长江水平行测定的RSD为1.8%,加标回收率为99.0%~104%。     

基于自动种子区域生长的火焰分割算法

在存在壁面反射的低照度火灾环境中,传统的火焰分割算法如颜色分割、运动检测等,在进行火焰分割时造成过分割现象,分割的效果不理想,影响后续的火灾正确识别。针对上述问题,提出了一种基于自动种子区域生长(Automatic Seeded Region Growing,ASRG)的火焰分割算法。首先将从火灾视频中获取的火灾图像从RGB颜色空间转换到YCbCr颜色空间,在Y通道中采用较大自适应阈值背景减法将火灾图像二值化,分别将可疑火焰像素点的横坐标和纵坐标按大小进行排序,取排序后的中间值作为种子点,再由原RGB火灾图像转换而成的灰度图像中,以该种子点进行区域生长,最后将区域生长后的火焰分割图像与采用较小自适应阈值背景减法得到的火焰分割图像进行交集处理,得到最终的火焰分割图像。实验表明ASRG算法在存在壁面反射的低照度火灾环境中,火焰分割效果好,有效解决了该环境下的火焰过分割问题,同时在其他火灾环境中也有较好的火焰分割效果。     

不同边沿高度油池火燃烧行为的实验和数值模拟研究

采用实验和FDS数值模拟相结合的方法,探讨了边沿高度对油池火燃烧特性的影响。在实验部分,研究了燃烧速率和表观火焰高度随边沿高度的变化趋势,并分别分析了各个阶段的热反馈机制。在实验获得不同尺度、边沿高度正庚烷油池火燃烧速率的前提下,建立相应尺度的不同边沿高度油池火的Fire Dynamics Simulator(FDS)计算模型以针对火焰高度进行了数值模拟研究,分析了实际火焰高度、火焰下探高度随边沿高度的变化趋势,并提出了相关的无量纲拟合式。     

Is the bone tissue of ring-billed gulls breeding in a pollution hotspot in the St. Lawrence River,Canada, impacted by halogenated flame retardant exposure?

Bone metabolism is a tightly regulated process that controls bone remodeling and repair in addition to maintaining circulating calcium and phosphate levels. It has been shown that certain organohalogen contaminants may adversely impact bone tissue metabolism and structure in wildlife species. However, exceedingly few studies have addressed the bone-related effects of organohalogen exposure in birds. The objective of the present study was to investigate the associations between markers of bone metabolism and structural integrity, and concentrations of established and current-use halogenated flame retardants (FRs) in ring-billed gulls (Larus delawarensis) nesting in a known FR hotspot area in the St. Lawrence River (Montreal, Canada). Bone metabolism was assessed using plasma calcium and inorganic phosphate levels, and alkaline phophatase activity, while bone (tarsus; trabecular and cortical sections) structure quality was examined using the percentage of bone tissue comprised in the total bone volume (Bv/Tv) and bone mineral density (BMD). Bv/Tv and BMD of the tarsus tended (not significant) to be positively associated with circulating calcium levels in male ring-billed gulls. Moreover, concentrations of FRs in male bird liver (brominated diphenyl ether (BDE)-154, -183, -201, and -209) and plasma (BDE-209) were negatively correlated with trabecular and cortical BMD of the tarsus. These correlative associations may suggest light demineralization of bone tissue associated with FR exposure in male ring-billed gulls. Present findings provide some evidence that bone (tarsus) metabolism and mineral composition may be impacted in high FR-exposed (mainly to PBDEs) ring-billed gulls breeding in the highly urbanized Montreal region.