一种新型高铺展性水成膜泡沫的性质以及灭火性能研究

介绍了一种自制的多组分水成膜泡沫溶液,并对该泡沫溶液的各种性能(表面张力,铺展性,灭火性能等)进行了表征,同时与传统的水成膜泡沫进行了对比.试验结果表明,该泡沫溶液的表面张力和界面张力很低.极低的表面和界面张力导致该泡沫在液体燃料表面具有很强的铺展性,能在极短的时间内在燃料表面铺展成一层液膜,使燃料表面迅速隔氧降温,从而达到迅速灭火的作用.在通过压缩空气泡沫系统进行灭火的试验中,不论泡沫浓度处于3%或6%,在液体流量较大的情况下,该泡沫对标准柴油火的熄灭时间都在3秒之内.另外,泡沫溶液的铺展性和所形成的泡沫的灭火性能的试验结果表明水成膜泡沫的灭火速率主要是由其在燃料表面形成水膜的速率决定,而形成水膜的速率主要是由泡沫溶液的铺展速率、即铺展性决定的.     

Eco-Labelling of Shampoos,Shower Gels and Foam Baths (6 pp)

GOAL, SCOPE AND BACKGROUND: Environmental issues of personal care products have been met with little attention in the past. Monitoring data as well as preliminary environmental risk assessments indicate that some ingredients in personal care products might be relevant pollutants in the environment. Following the precautionary principle, eco-labelling is proposed as an effective tool for source control of one major group of personal care products, shampoos, shower gels and foam baths (SSBs). Eco-labelling is a soft, but effective market driven and product specific approach to lower discharge of environmentally detrimental substances. Products that fulfil the criteria proposed help to minimise the impact of SSBs on the environment. METHODS: Available assessment tools for dangerous substances (e.g. current legislation on environmental risk assessments and classification, and labelling, eco-labelling criteria for similar products, the calculation of the critical dilution volume) were adapted and integrated into the criteria for the eco-labelling of SSBs. RESULTS AND DISCUSSION: A short outline of the eco-labelling criteria developed for SSBs is provided. The basic criteria concern the effects of the substances discharged into the waste water during and after use. Products with an eco-label award may exclusively contain substances for which basic information about their effects on the environment is available. They may not contain persistent, bioaccumulating, toxic or ecotoxicological substances. In addition, the basic criteria include requirements for the container and consumer information. CONCLUSION: The basic criteria for eco-labelling SSBs are based on the actual state of science and are at the same time as simple and transparent as possible to ensure the best applicability. SSBs that comply with the described basic criteria can contribute to a lower chemical burden of waste water treatment plants and surface water. RECOMMENDATION AND OUTLOOK: The proposal for basic criteria described should stimulate discussion on eco-labelling of SSBs. It should help to pass valid criteria supported by authorities, producers and consumer groups for a national or international eco-label, e.g. for the European Flower or the German Blue Angel. In future, the successful introduction of labelled SSBs into the market will raise the awareness of the general public about the environmental effects of personal care products and it will help to promote environmentally compatible products.     

导电泡沫陶瓷过滤柴油机排气微粒的研究

柴油机排气微粒对环境危害严重,研究开发排气过滤技术是解决问题的有效措施之一.利用表面密集排列短纤维的导电泡沫陶瓷作为微粒过滤器的滤芯,对柴油机排气微粒的过滤效率可达90%,并可进行原位通电加热再生,再生后过滤效率不下降.同时,对表面纤维化导电泡沫陶瓷的过滤机理进行了初步探讨.     

水性聚氨酯/UHMWPE纤维防弹复合材料无纬布预浸料成型工艺研究

本文比较了纤维预浸料不同结构形式与防弹性能的关系，并详细研究了水性聚氨酯／UHMWPE纤维防弹复合材料的含胶量、面密度和叠层方式等预浸工艺参数对材料防弹性能的影响，结合弹道实验分析了各因素作用的机制。     

Soybean-Oil-Based Polyisocyanurate Rigid Foams

Polyisocyanurate foams were prepared from polymeric 4,4-diphenylmethane diisocyanate (MDI), soy polyol and polypropylene oxide polyol by varying isocyanate index from 110 to 350. The higher isocyanate index produced polyisocyanurate foams with higher thermal stability, improved flame resistance, tensile strength, higher modulus, and higher glass transition. Soy-based foams displayed better thermal stability, lower flammability, higher rigidity (modulus) and higher compression strength than those based on the propylene oxide polyols of the same molecular weight and functionality.     

燃油箱填充用防火抑爆网状泡沫材料

网状聚氨酯泡沫材料具有97%以上的孔隙、优良的机械性能和极强的抑制爆炸连锁反应扩大和缓和燃油冲击晃动等特性.本文就这类网状材料的结构、性能和防火抑爆机理进行分析和研究,并简要介绍了这类材料的使用情况.     

多孔TiO2薄膜电极/泡沫镍硬模板制备及其光电催化性能

以泡沫镍为载体,活性炭为造孔剂,采用硬模板法制备泡沫镍负载多孔TiO2薄膜(Porous TiO,films/foam nicel,PTFN)电极,并利用XRD和SEM等测试手段对其结构进行表征.同时,通过亚甲基蓝溶液的光电催化降解反应,对其光电催化活性进行评价,并探讨阳极偏压、通气速率、亚甲基蓝初始溶液浓度和活性炭造孔剂量对降解效率的影响规律.结果表明:相对于未加模板造孔剂的TiO2薄膜电极的光电催化性能,泡沫镍负载多孔TiO2薄膜具有更好的光电催化性能,原因是高比表面积电极有利于为光电催化提供高浓度的亚甲基蓝分子,使反应速率加快;另外,存在最佳的光电催化降解条件,即当外加阳极偏压为3 V,通气速率为40 L·h-1,n(活性炭造孔剂最):n(前驱体中钛)(即C/Ti)为10％,亚甲基蓝溶液初始浓度为1mg·L-1时,光电催化降解效率最高.同时,研究发现,亚甲基蓝在光电催化降解过程中,通过自由基的氧化发生了C=N键的断裂去甲基化,最后被降解为H2O、CO2和SO42-、NO3-、Cl-离子.     

以亲水化改性聚氨酯为多孔载体的生物膜移动床反应器处理污水中试研究

载体是生物膜移动术反应器(MBBR)工艺的关键影响因素,利用亲水化改性聚氨酯载体构建MBBR,用于城市污水的中试研究.反应器日处理能力为3～3.5 t.d-1,水力停留时间为7～8 h,在连续进水(进水COD 140～280 mg.L-1,NH4+-N 30～50 mg.L-1,总氮45～65 mg.L-1,总磷2.5～4.0 mg.L-1)条件下对改性载体的挂膜速度、有机物和氮的去除效果及不同温度下的污水处理特性进行了研究.140 d的试验结果表明在24～28℃时,载体上生物膜在6 d左右即可完成挂膜,并达到稳定的处理效果.COD、NH4+-N、TN和TP的平均去除率分别为70%、97%、70%和39%.随着水温逐渐降低到12℃左右,NH4+-N的去除率依然能达到97%,表明通过添加改性载体可以提高反应器低温条件下的硝化能力.     

聚氨酯缓冲材料在2种典型环境下的耐候性研究

目的 研究聚氨酯缓冲材料在湿热海洋和干热沙漠环境下的老化性能。方法 将3种不同表观密度的聚氨酯缓冲材料在万宁和敦煌试验站进行1 a的自然环境试验,探究聚氨酯缓冲材料外观、静态压缩性能、压缩永久变形性能和红外光谱的变化。结果 在1 a的自然环境试验中,材料压缩强度先增大后降低,压缩永久变形逐渐增大;在万宁试验站,样品表面出现发霉现象,密度为25、30、40 kg/m³的聚氨酯缓冲材料的压缩强度分别增大或衰减至106.4%、93.3%、87.5%,压缩永久变形分别增大109%、98%、138%;在敦煌试验站,密度为25、30、40 kg/m³的聚氨酯缓冲材料的压缩强度分别增大或衰减至106.4%、98.2%、97.8%,压缩永久变形分别增大55%、74%、93%。结论 聚氨酯缓冲材料在自然环境中会发生水解和热氧降解等老化反应,使材料性能出现下降。材料表观密度越大,性能衰减越快。材料对于湿热海洋环境更敏感,在万宁站的老化程度大于敦煌站。     

神农架大九湖大气中的多环芳烃

为了研究神农架大九湖大气中多环芳烃(polycyclic aromatic hydrocarbons,PAHs)的质量浓度、来源及健康风险,用聚氨基甲酸酯泡沫被动采样器对大九湖大气中的PAHs进行了季节性监测.结果表明,大气中ΣPAHs的质量浓度为6.94~184.23 ng·m~(-3),平均值为30.36 ng·m~(-3),主要成分为菲(Phe)、萘(Nap)、芘(Pyr)、荧蒽(Fla)、芴(Flu)和蒽(Ant)等低环数化合物.与其他地区相比,大九湖大气中的PAHs处于较低污染水平.鹿场附近、大九湖泥炭区和大九湖管理局PAHs污染较严重.秋冬季污染较严重,春夏季污染较轻.特征化合物含量比值法和后向轨迹聚类分析法解析结果表明,大九湖大气中的PAHs污染主要来自煤和生物质的燃烧,兼有机动车尾气排放和石油源,既有当地排放又有来自湖北、河南和湖南等地的近源传输和少数西北方向的远源传输.健康风险评价结果表明,总毒性当量质量浓度(ΣBaPeq)年平均值为0.208 ng·m~(-3),低于我国环境空气质量标准(GB 3095-2012)中规定的BaP年平均质量浓度限值(1 ng·m~(-3)),说明大九湖大气中PAHs的健康风险较小.