城市主干道交通噪声影响因素分析

选取了沈阳市lO条主干道,通过实地调查监测与文献资料分析相结合的方法,分析了主干道交通噪声的影响因素,结果表明,车流量与车型是影响城市主干道交通噪声的重要因素,并提出控制城市主干道交通噪声的防治措施,改善声环境质量。     

长三角重点行业大气污染物排放及控制对策

研究重点分析了长江三角洲地区电力和水泥行业的大气污染物排放特征,并结合相关行业统计数据和污染物排放因子,对2004年这两个重点行业的大气污染物排放量进行了估算。结论如下:长三角地区火电行业2004年SO2、烟尘、NOX和燃煤大气汞排放量分别为149.2×104t、21.1×104t、87.6×104t和13.7t。2004年江、浙、沪三地水泥行业共排放工艺粉尘76.2×104t,其中PM10为70.1×104t、PM2.5为45.9×104t,气态污染物SO2、NOX、CO和氟化物排放量分别为12.4×104t、49.5×104t、247.9×104t和7.4×104t。并对长三角地区电力和水泥行业的污染控制问题提出一些相关举措。     

新时期医疗废物处置技术体系的变革及发展

近20年来,我国在推进医疗废物无害化管理和处理处置方面开展了大量的工作,成绩举世瞩目。但处于新的历史时期,如何更好地基于可行技术,探索与其相匹配的管理模式,解决医疗废物处理处置短板已成为迫在眉睫的工作。我国目前存在针对医疗废物处理处置技术适用性考虑不足、农村及偏远地区医疗废物处置能力缺乏、医疗废物应急处置能力存在短板以及医疗废物领域科技创新能力有待提升等问题。因此,结合各种医疗处置技术特点及适用性,提出基于技术的适用性推进医疗废物处理处置技术布局优化、通过管理和技术进步解决农村和边远地区医疗废物处置难题、合理配置疫情期间应急处置能力以及推进科技创新等建议,为打造新时期医疗废物处理处置技术体系提供参考。     

煤矿岗前人员不安全状态智能检测系统研究——以红柳林煤矿为例

为从根本上降低煤矿从业人员实施不安全行为的概率,在充分考虑煤矿从业人员不安全个体状态是诱发其不安全行为的主要原因的基础上,设计开发一套矿工不安全状态智能检测系统。首先,对2007—2022年期间各高危行业安全事故调查报告和专家研究进行归纳,总结得出煤矿从业人员不安全状态的影响因素,构建包括生理状态、心理状态以及个体能力状态在内的3个一级指标和15个二级指标体系;其次,通过相应的表征模型对不安全状态影响因素进行深入剖析;最后,基于构建的从业人员不安全状态倾向数据库,建立煤矿岗前不安全状态智能检测系统。研究结果表明：在下井工作前对从业人员个体状态进行智能检测,能够实现矿工不安全状态“早发现、早干预”,能够有效地降低人因事故发生率,研究结果对煤炭行业安全管理具有重要的参考价值。     

爆炸超压场景下危化品社会风险对允许规划人口密度的影响分析*

为研究危化品重大危险源基于社会风险基准的规划管控影响,采用我国标准规定的定量风险评价方法,TNT当量炸药简化方法,针对最大TNT当量炸药、事故发生总累计频率、人口密度分布控制参数等不同工况条件,对比分析国土开发强度的允许人口密度受社会风险约束影响的变化规律。研究结果表明:人口密度指数分布控制参数Nk与Nb的允许取值随最大TNT当量炸药和事故发生总累计频率降低而提高;确定工况下,允许总人口规模受最大TNT当量炸药影响很小;在最大TNT当量炸药大于100 t或事故发生总累计频率小于1×10-8次/a时可按最大事故场景进行规划控制分析。     

深埋水平岩层隧道开挖稳定性分析及控制*

针对深埋高地应力水平岩层掌子面开挖稳定性及支护结构失效问题,以大峡谷隧道为工程背景,通过现场测试、室内试验、数值模拟等方法,探究深埋高地应力水平岩层失稳机理及控制措施。研究结果表明:坚硬岩体被节理面切割后,在高地应力作用下容易发生挤压破碎,破碎岩体遇水发生软化,导致掌子面发生大范围塌方,初支和超前支护失效;隧道开挖后岩层发生不均匀沉降,浅部岩层最先发生弯折破坏,层内块体错动滑移,继而向上方岩层发展,并伴随层间分离和层内裂隙发育,最终形成宏观破裂面;提出的台阶法、2 m开挖进尺、砼喷层、双层小导管、提高初支强度的整体优化控制措施,可有效提高现场支护效果。     

复杂地下空间交通体系连接匝道烟气控制方案研究

复杂地下空间交通体系作为新型地下交通形式,车流量大且存在多个分合流点,气流组织复杂,防灾排烟难度极大。以杭州某复杂地下空间交通体系连接匝道为研究背景,提出匝道通风排烟设计方法,再选取其中二合一式连接匝道结构,采用FLUENT模拟其两种防灾排烟方案的有效性。模拟结果表明：两个连接匝道末端单独设置排烟口的设计方案可有效保证火源下游车辆和火源上游人员的逃生安全;根据分合流流速分配理论模型,在合流处只设置一个排烟口且排烟量提高40 m³/s时,也可达到同样的防灾排烟效果,从土建成本考虑,推荐此方案,为同类型隧道结构提供借鉴。     

Cybersecurity and dynamic operation in practice: Equipment impacts and safety guarantees

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid dynamics and finite element analysis simulations to analyze how cyberattacks on control systems could impact a metric for stress in equipment (maximum Von Mises stress) over time. Subsequently, we develop reduced-order models showing how both a process variable and maximum Von Mises stress vary over time in response to temperature variations at the boundary of the equipment, to use in evaluating how advanced control frameworks might impact and consider the stress. We close by investigating options for obtaining parameters of an economic model predictive control design that would need to meet a variety of theoretical requirements for safety guarantees to hold. This provides insights on practical safety aspects of control theory, and also indicates relationships between control and design from a safety perspective that highlight further relationships between design and control under dynamic operation to deepen perspectives from the computational fluid dynamics and finite element analysis discussions.     

Scenario derivation and consequence evaluation of dust explosion accident based on dynamic Bayesian network

In order to clarify the correlation between the evolution path of dust explosion accidents and emergency decision-making, and to accurately predict the disaster damage levels of various disaster bearing bodies. This paper extracts 56 key scenario elements from four aspects, namely state, answer, goal and environment, based on the analysis of typical dust explosion accident cases. At the same time, a general scenario evolution path of dust explosion accident is constructed. Using fuzzy number set theory and dynamic Bayes joint probability model, the accurate solution of scenario state probability was realized. With the help of accident cases and dynamic Bayes approach, the dust explosion consequence prediction index system and evaluation criteria were constructed, covering factors such as dust explosion intensity, casualties, direct economic losses, equipment damage, building damage, environmental damage and other factors. A polyethylene wax dust explosion accident in a city of China was used to verify the dust explosion accident scenario evolution model and consequences prediction model. The predicted results were in good agreement with the actual damage of various carriers of the accident, which indicated that the model could be used for dust explosion accident prediction and disaster loss prediction. The research results provided reference and technical support for the prediction of dust explosion accident evolution direction, emergency aid measures decision and deployment, disaster damage prediction and evaluation.     

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Sodium is the main cooling medium in the circuit of fourth-generation nuclear reactors, and its leakage constitutes a severe fire hazard because of its high chemical activity. In this study, expandable graphite (EG), which is a traditional sodium fire-extinguishing agent, was modified with zinc borate (ZB) as an intercalator, and the modified EG_ZB was characterized. Moreover, the effectiveness of the modified EG_ZB in extinguishing sodium fires was tested using a self-developed fire-extinguishing experimental device. This study's results indicated that EG, EG_ZB had a smaller particle size, higher thermal stability, higher fire-extinguishing speed, and lower powder mass consumption than EG. During the fire-extinguishing process, ZnO decomposed by ZB captured free radicals and inhibited the combustion reaction. Furthermore, B₂O₃ was adsorbed on the surface of the EG layer, which strengthened covering and asphyxiation. The findings of this study provide crucial information for effectively controlling fires caused by active metals and metallo-organic compounds.