燕山地区大红峪组火山岩古风化作用新认识

大红峪组火山岩 ,在成岩后受古风化作用影响引起化学成分的变化 ,特别是深风化带岩石后期K2 O沉积的影响 ,造成从未风化到深风化岩石在TAS图解、碱度系数、岩系指数及岩石类型等方面相应地发生变化。在TAS图解上 ,岩石向碱性增加、SiO2 减少方向变化。碱度系数变大 ,岩系指数的变化使火山岩反映为从钙碱性到超碱性。岩石类型也出现不确定性。深风化带岩石根据岩石化学成分计算标准矿物时 ,出现白榴石、霞石等碱性矿物 ,而实际矿物未见这一现象 ,也是后期K2 O沉积影响的结果。排除古风化的影响 ,作者认为大红峪组火山岩应为钾质的粗面岩和粗面玄武岩 ,属钙碱系列。粗面玄武岩为铝过饱和型 ,粗面岩为正常型。不存在明显的岩浆分离结晶作用 ,其原始岩浆应以基性为主。由于上述的原因 ,影响了对岩浆来源、构造环境的判断。推断其构造环境 ,是在总的海进条件下 ,出现多次的海退 ,伴有多次火山喷发活动 ,水动能比较大 ,气候干旱 ,封闭、半封闭的海盆中富含钾的环境。     

沁河冲洪积扇地下水水化学特征及成因分析

为研究河南省济源市沁河冲洪积扇地下水水化学特征及其成因,2016年10月采集水样共计60组,其中地下水水样51组,地表水水样9组.运用数理统计、舒卡列夫分类、Piper三线图、Schoeller图、Gibbs图和离子比值等方法,分析了研究区内地下水和地表水水化学类型分布特征,讨论了地下水和表水水化学演化过程的主要控制因素.结果表明:(1)研究区地表水和地下水中主要阴阳离子为Ca~(2+)、Mg~(2+)、SO_4~(2-)、HCO_3~-,地表水和地下水的补给来源密切相关;(2)地下水水化学类型以HCO_3-Ca型、HCO_3-Ca·Mg型和HCO_3·SO_4-Ca·Mg型为主;地表水水化学类型以HCO_3·SO_4-Ca·Mg型为主;(3)地下水和地表水主要离子的形成主要受碳酸盐矿物风化溶解作用、离子交换作用和蒸发作用共同影响,硫酸、碳酸参与了碳酸盐矿物的风化溶解过程.     

聚合铝的凝聚絮凝特征及作用机理

采用不同碱化度B(OH/Al)值的聚合铝和AlCl_3对高岭土悬浊液进行凝聚絮凝实验,同时测定电泳度及表面吸附特征,结合不同铝盐的化学形态分布,探讨聚合铝的高效凝聚作用原理.并求得表面吸附覆盖率,电位变化与形态分布间的定量关系,绘出聚合铝的凝聚区域图,对阐明聚合铝的作用机理提供了实验依据.     

质量控制图的原理及其在环境监测分析中的应用

结合数理统计中最小概率事件原理，探讨了质量控制图的原理、常用类型、分析和实现过程以及在环境监测质量控制中的应用。     

基于SD模型的不停航施工情景下机场安全风险作用机理研究

以不停航施工为特定情景,构建SD模型对机场安全风险的发生及作用机理进行研究。首先采用鱼骨图识别不停航施工情景下的机场安全风险,得到不停航施工情景下的机场安全风险共包括22个关键影响因子;然后采用因果关系图分析安全风险的影响关系,并运用SD模型软件Vensim PLE构建不停航施工情景下的机场安全风险SD模型流图,分析风险的作用机理,得到各风险因子相互作用形成5个主要的风险回馈循环;最后从机场层面、政府层面、施工企业层面三方面着手,提出了具体管理建议。该研究丰富了不停航施工情景下的机场安全风险方面的理论研究,可为减少不停航施工情景下的机场安全风险、完善民用机场安全风险管理体系提供参考。     

沧东断裂带兴济1井水位动态特征及其映震能力研究

整理和分析兴济1井的静水位观测以来的水位和气压观测资料,发现该井水位线性下降趋势明显,存在峰谷形式的年变周期,滑动速度分析显示出一定的异常信息;数据散点图显示水位观测结果受固体潮影响大,滑动分析显示固体潮规律畸变时可能存在前兆信息;主要的异常前兆表现形式为水位的下降方向脉冲,可能与井址附近区域或者井址北东方向的天津和唐山老震区相关断裂带上的地震活动有关.     

PROBLEMS IN WEIGHTING OF HYETOGRAPHS1

ABSTRACT: It was found that the conventional weighting factor application to hyetograph ordinates results in artificially attenuated storm patterns. A modified weighting procedure is suggested which allows adjustments in the storm timing, peak intensity, and volume but conserves the storm pattern observed at the raingage nearest to the watershed point of interest. The systematic underestimation of peak flood flows, which result from conventional hyetograph weighting, can be avoided by conserving the hyetograph shape from the raingage nearest to any subarea of a modeled watershed and merely applying weighting factors to the rainfall volumes and temporal center of gravity of several hyetographs.     

OPTIMIZING FLOOD CONTROL ALLOCATION FOR A MULTIPURPOSE RESERVOIR1

ABSTRACT. In the last decade much research has been devoted to applying the systems analysis approach to water resources problems. A popular research goal has been determination of the “best” method of operating a multipurpose reservoir. The goal of this study was to derive the economically optimum flood control diagram for a multipurpose reservoir by systems analysis. The technique employed to optimize the flood control diagram was programmed so that the optimization process could be applied to other multipurpose reservoirs. Two computer programs developed at the U.S. Army Corps of Engineers' Hydrologic Engineering Center were utilized with modifications to simulate the operation of Folsom Reservoir in central California. Economic analyses were incorporated along with an optimization technique into the reservoir operations program; and the resultant program was capable of routing a sequence of monthly reservoir inflows, computing benefits for various flood control diagrams (as dictated by the optimization procedure), and selecting the economically optimum flood control diagram. The univariate gradient technique was the optimization procedure employed. The two computer programs are on file at the Hydrologic Engineering Center in Davis, California.     

Technical modeling in integrated risk assessment of chemical installations

This paper presents the technical model of an Integrated Quantitative Risk Assessment method, taking into account management as well as technical design and producing risk level measures. The basic steps of the technical model consist in developing a Master Logic Diagram (MLD) delineating the major immediate causes of Loss of Containment and associated quantitative models for assessing their frequency. Appropriate management models quantify the parameters of the technical model on the basis of the safety management system of the installation. The methodology is exemplified through its application on the risk assessment of a LPG scrubbing tower of an oil refinery. A detailed technical model simulating the response of the system to various initiating events is developed, along with a detailed model simulating the influence of the plant-specific management and organizational practices. The overall effect is quantified through the frequency of release of LPG as a result of a Loss of Containment in scrubbing towers of the refinery.     

MATLAB加VB实现实验室质量控制图的绘制

阐述了质量控制图在实验室质量控制中的作用和存在的问题,提出应用Visual Basic的界面设计功能,以及MATLAB的计算和图形处理功能,通过在VB中以ActiveX组件方式调用 MATLAB对象的属性和方法,实现质量控制中复杂的数据统计和图表的制作功能.并对《环境水质监测质量保证手册》中的各类质控图进行了实例示范.