Three-Dimensional Modelling of Concentration Fluctuations in Complicated Geometry

The strong fluctuating component in the measured concentration time series of a dispersing gaseous pollutant in the atmospheric boundary layer, and the hazard level associated to short-term concentration levels, demonstrate the necessity of calculating the magnitude of turbulent fluctuations of concentration using computational simulation models. Moreover the computation of concentration fluctuations in cases of dispersion in realistic situations, such as built-up areas or street canyons, is of special practical interest for hazard assessment purposes. In this paper, the formulation and evaluation of a model for concentration fluctuations, based on a transport equation, are presented. The model is applicable in cases of complex geometry. It is included in the framework of a computational code, developed for simulating the dispersion of buoyant pollutants over complex geometries. The experimental data used for the model evaluation concerned the dispersion of a passive gas in a street canyon between 4 identical rectangular buildings performed in a wind tunnel. The experimental concentration fluctuations data have been derived from measured high frequency concentrations. The concentration fluctuations model is evaluated by comparing the model's predictions with the observations in the form of scatter plots, quantile-quantile plots, contour plots and statistical indices as the fractional bias, the geometrical mean variance and the factor-of-two percentage. From the above comparisons it is concluded that the overall model performance in the present complex geometry case is satisfactory. The discrepancies between model predictions and observations are attributed to inaccuracies in prescribing the actual wind tunnel boundary conditions to the computational code.     

Identifying the largest individual sample value from a two-way composite sampling design

Composite sampling techniques for identifying the largest individual sample value seem to be cost effective when the composite samples are internally homogeneous. However, since it is not always possible to form homogeneous composite samples, these methods can lead to higher costs than expected. In this paper we propose a two-way composite sampling design as a way to improve on the cost effectiveness of the methods available to identify the largest individual sample value.     

太湖地区“禁磷”措施的效果及在富营养化控制中的作用

通过太湖地区采取“禁磷”措施前后城市生活污水、主要入湖河水和湖体水域中磷浓度与富营养化指数变化的分析 ,证实“禁磷”措施对降低居民生活污水中磷浓度的作用较为明显 ,降幅为 2 4 %左右 ,但对入湖河道和湖体水域中磷浓度与水体富营养化的影响则不明显。表明太湖富营养化的改善 ,除了实施“禁磷”措施外 ,尚需结合流域内其它污染治理措施 ,进行综合治理 ,才能取得较好的效果。     

中国耕地非农化压力时空格局的演变分析

社会经济和资源禀赋的区域差异导致耕地非农化压力表现出明显的空间异质性。开展耕地非农化压力测算并揭示其时空格局演变,是实现土地资源优化配置的基础。从经济因素、社会因素、产业结构和资源禀赋4个方面构建耕地非农化压力指数评价指标体系,采用熵值法计算各指标权重,继而计算1990~2014年中国31省的耕地非农化压力指数,并在此基础上开展了耕地非农化压力的时空格局分析。结果表明:(1)从空间格局分布来看,中国耕地非农化压力空间分布呈现明显的地理梯度,总体上呈现从东到西依次递减的态势。(2)从时间变化趋势来看,不同地区各省份之间的耕地非农化压力指数变化呈现多元化趋势。东部沿海地区,山东、浙江、江苏的耕地非农化压力指数处于上升阶段,上海、福建的压力指数变化趋势逐渐趋稳,广东的压力指数呈现下降趋势。中部地区,河南、河北、山西、江西的耕地非农化压力指数趋稳,陕西、湖北以及四川、重庆等西南地区省份的压力指数呈上升趋势。西部沿边3省(云南、西藏、新疆)的耕地非农化压力呈现了一致的下降趋势。(3)从时空格局结合来看,耕地非农化压力不同的省份其变化趋势呈现出截然不同的走向。在耕地非农化压力较大的地区,耕地非农化经历了从制度驱动向发展推动的阶段,经济增长的倒"U"型轨迹明显,经济增长与耕地非农化之间的关系逐渐脱钩。在耕地非农化压力居中或较小的地区,产业发展滞后,土地比较收益较低,耕地的社会保障作用、生态作用对耕地非农化的影响较大,从而增加了部分省份的耕地非农化压力。     

火电灰渣场自然恢复下灰渣养分及重金属含量研究

对自然恢复下4类不同年代样地的灰渣养分含量及重金属含量进行研究,通过对比分析发现,有机质、全氮、全钾、全磷含量随着自然恢复时间的增加呈现递增的趋势,全磷含量在各恢复阶段与对照样地之间并不存在显著差异(P0.05)。pH随着恢复时间的增加呈现递减的趋势。对灰渣综合质量指数进行研究发现,自然恢复长期、中期、短期与自然恢复初期对比均有显著提高(P0.05),且随着自然恢复时间的增加灰渣综合质量指数逐渐提高。对灰渣场锌、铅、铜3种重金属研究后发现,在自然恢复下随着时间的增加,灰渣中重金属含量均呈现递减的趋势。     

一种基于预测法的电磁兼容设计方法

文章以数模混合电路设计实践为基础,介绍了一种基于预测法的电磁兼容设计方法。先以电磁兼容测试理论为基础介绍数模混合电路设计中的电磁兼容方法,在以此方法建立电磁兼容设计模型,并通数模混合电路实践来检验和改进设计模型。     

大港油田苦咸再生水反渗透工艺自动控制研究

分析了大港油田污水回用深度处理工程苦咸再生水反渗透工艺仪表配置及自动控制方式,介绍了苦咸再生水反渗透系统亟待解决的各类问题。着重论述了仪表设置、余氯控制、结垢污堵控制、微生物污堵控制的实际运行方式,探讨了苦咸再生水反渗透工艺的技术可行性和可靠性。     

采用水解酸化-复合好氧处理制药工业废水的工艺评价

以制药工业综合废水处理为例对其采用的两级水解酸化复合好氧工艺的处理效果进行评估。按常规指标进行评估,该工艺对于制药综合废水的处理效果达到了设计目的,COD去除率可达到78.2%以上,NH+4-N的去除率达到99.3%,出水质量基本满足"污水综合排放标准(GB8978-1996)"二级标准和"辽宁省污水综合排放标准(DB21.1627-2008)";急性毒性的检测表明,经过该工艺处理后出水为低毒性;三维荧光谱分析(EEM)表明,制药综合废水经生物处理后的可溶性有机物中仍然存在难降解物质,建议增加物化处理以提高处理效果;并且制药废水经处理后的出水中的盐度对排入的生态系统存在风险,建议纳入排放标准以加强管理。     

Subcritical water oxidation of propham by H2O2 using response surface methodology (RSM)

This study was conducted to investigate the degradation of propham, which is a compound that pollutes water and seriously threatens human health, by subcritical water oxidation and using H₂O₂ as an oxidising agent. The maximum total organic carbon removal rate of propham was obtained as 73.65% at 40 min of treatment time and 60 mM of H₂O₂ concentration and 373 K of temperature. In addition, response surface method based on the Box-Behnken design was applied to design the degradation experiments of propham for determination of the combined effects of process variables, namely temperature, concentration of oxidising agent and treatment time. The proposed quadratic model of propham degradation, which was examined with the analysis of variance, was used for navigating the design space. The R² and adjusted R² values of the model were determined as 0.9921 and 0.9819 respectively. It was shown that propham was effectively degraded, thus could be removed from the water by using an environmentally friendly method.     

基于风险管理方法的危险源评价分级研究

以化工企业内涉及危险物质的装置、设施而构成的危险源为研究对象,在简要分析重大危险源评价分级的作用与方法的基础上,针对中小型化工企业,提出基于风险管理方法的危险源评价分级概念。通过计算危险源引发事故的概率和事故后果来确定危险源的风险值,并将其分为4个等级,指导企业制定合适的安全管理制度、使用恰当的安全技术措施,以最小化的代价确保危险源安全运行,从而提高中小型化工企业的危险源管理水平。