液化天然气储罐9％镍钢焊缝相控阵AUT工艺

9％镍钢液化天然气储罐制造安装过程中,焊缝检验通常用常规射线照相（RT）进行。本文研讨用相控阵半自动超声检测（AUT）取代射线照相的工艺制定及验证方法。要领分四步：首先带缺陷专用焊接试样的制备;然后相控阵AUT工艺的编制;其次在有已知缺陷的焊接试样上,对AUTT艺作“开放性”验证试验;最后在现场对整个数据采集系统作“封闭性”操作演示和验证评定试验。验证结果表明相控阵AUT取代RT可行可靠,能凸显AUT种种优势。     

重铬酸钾─三氯化钛法测定水中溶解氧

介绍了三氯化钛（ＴｉＣｌ３）与氧反应，以钨酸钠（Ｎａ２ＷＯ４）作指示剂，用重铬酸钾溶液滴定过剩三氯化钛来测定水中溶解氧的方法。本法与碘量法比较，结果表明方法准确、快速，适合于水样中溶解氧的测定     

助催化无汞盐快速测定水中化学需氧量

在ψ（Ｈ２ＳＯ４）＝５６％硫酸介质，重铬酸钾的氧化体系中，以钼权铵，硫酸铝钾为助催化剂，可减少量化剂硫酸银的用量，消解１５ｍｉｎ即可测定水中化学需氧量，用硝酸银溶液代替硫酸汞去除水氯离子，避免了汞盐的污染，工业废水回收率在９７％～１０１％之间，有较好的准确度。     

环境中萘和甲基萘的气相色谱测定

针对发生的甲基萘油车泄漏事故进行了水样和空气样品中萘和甲基萘的测定，水样中直接进样，对空气样品则以甲醇为吸收液吸收，富集，氢火焰毛细管色谱法测定。     

Estimates of species- and ecosystem-level respiration of woody stems along an elevational gradient in the Luquillo Mountains, Puerto Rico

We measured CO₂ efflux from stems of seven subtropical tree species situated along an elevational gradient in the Luquillo Mountains, Puerto Rico and scaled these measurements up to the landscape level based on modeled and empirical relations. The most important determinants of ecosystem stem respiration were species composition and stem temperature. At a species scale, measured CO₂ efflux per unit bole surface area at a given temperature was highest in the early successional species Cecropia schreberiana and lowest in species that inhabit high elevations such as Micropholis garciniifolia and Tabebuia rigida. Carbon dioxide efflux rates followed a diel pattern that lagged approximately 6 h behind changes in sapwood temperatures. At an ecosystem scale, our simulation model indicates a decreasing trend of stem respiration rates with increasing elevation due to shifts in species composition, lower temperatures and reductions in branch surface area. The highest estimated stem respiration rates were present in the lowland tabonuco forest type and the lowest rates were present in the elfin forest type (mean 7.4 and 2.1 Mg C ha⁻¹ yr⁻¹, respectively). There was slight temperature-induced seasonal variation in simulated stem respiration rates at low elevations, with a maximum difference of 19% between the months of February and July. Our results coincide well with those of Odum and Jordan [Odum, H.T., Jordan, C.F., 1970. Metabolism and evapotranspiration of the lower forest in a giant plastic cylinder. In: Odum, H.T., Pigeon, R.F. (Eds.), A Tropical Rain Forest: A Study of Irradiation and Ecology at El Verde, Puerto Rico. U.S. Atomic Energy Commission, Oak Ridge, TN, pp. I165–I189] for the tabonuco forest type and extend their work by presenting estimates and spatial patterns of woody tissue respiration for the entire mountain rather than for a single forested plot.     

上悬窗条件下通风控制腔室火灾温度的实验研究

随着建筑结构的发展,上悬窗日益成为城市建筑窗户的选择,但这种通风条件下腔室火灾的发展特性仍缺乏研究.利用1:8相似比例的缩尺寸腔室火灾实验台,实验研究了上悬窗不同开口尺寸、不同开窗角度下,通风控制的腔室火灾温度发展特性.实验结果表明,通风控制条件下,腔室火灾温度随着上悬窗开口尺寸和开窗角度的增加而增加,并通过能量平衡分...     

Effects of release pressure on the transportation characteristics in pipeline and the diffusion behaviors in enclosure space of typical gas extinguishing agent

Reducing the release pressure of fire extinguishing systems can decrease potential safety hazards in large transport airplanes. To explore whether reducing the release pressure can achieve the release effect required by the airworthiness standards or not, the transportation characteristics in the pipeline and diffusion behaviors in the enclosure space of a typical fire extinguishing agent (Halon 1301) were investigated under five release pressures in the present study. The effects of the release pressure on the degree of superheat, injection duration, jet structure, and concentration distribution of Halon 1301 were analyzed. The results show that both of the degree of superheat and the injection duration decrease with an increase in the release pressure. The supplement of bubble expansion in the fire extinguishing agent can slow down the pressure decrease in the vessel. Both of the maximum and mean values of the pipeline differential pressure increase with an increase in release pressure. The maximum value of the jet angle decreases linearly with the increase in release pressure, and the jet deflects upward owing to the effects of buoyancy. The maximum concentration value decreases with an increase in the distance from the nozzle. The maximum concentration values in the near field from the nozzle increase with an increase in the release pressure. Under five release pressures, the concentration and holding time (duration above 6% volume concentration) of Halon 1301 on the centerline of the jet meet the requirements of airworthiness provisions.     

A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

毛细管柱气相色谱法测定环境空气中1,2-二氯乙烷

采用毛细管柱气相色谱法测定环境空气中的1,2-二氯乙烷,用活性碳吸附,二硫化碳解析,FID检测器分析.方法在0 mg/L～311mg/L范围内线性良好,当采样体积为20 L时,最低检出质量浓度为0.006 mg/m3,标准溶液平行测定的RSD≤2.2%,加标回收率为98.4%～101%.