Biosorption of Cr(III) from aqueous solution by freeze-dried activated sludge: Equilibrium,kinetic and thermodynamic studies

Batch biosorption experiments were conducted to remove Cr(III) from aqueous solutions using activated sludge from a sewage treatment plant. An investigation was conducted on the effects of the initial pH, contact time, temperature, and initial Cr(III) concentration in the biosorption process. The results revealed that the activated sludge exhibited the highest Cr(III) uptake capacity (120 mg·g⁻¹) at 45°C, initial pH of 4, and initial Cr(III) concentration of 100 mg·L⁻¹. The biosorption results obtained at various temperatures showed that the biosorption pattern accurately followed the Langmuir model. The calculated thermodynamic parameters, ΔG^o (−0.8– −4.58 kJ·mol⁻¹), ΔH^o (15.6–44.4 kJ·mol⁻¹), and ΔS^o (0.06–0.15 kJ·mol⁻¹·K⁻¹) clearly indicated that the biosorption process was feasible, spontaneous, endothermic, and physical. The pseudo first-order and second-order kinetic models were adopted to describe the experimental data, which revealed that the Cr(III) biosorption process conformed to the second-order rate expression and the biosorption rate constants decreased with increasing Cr(III) concentration. The analysis of the values of biosorption activation energy (E_a = −7 kJ·mol⁻¹) and the intra-particle diffusion model demonstrated that Cr(III) biosorption was film-diffusion-controlled.     

Worst-case identification of gas dispersion for gas detector mapping using dispersion modeling

To quickly and accurately quantify the material release in process units, gas detectors may be placed according to the results of gas dispersion modeling. DNV's PHAST software is one of the most useful and reliable tools for material dispersion modeling. In this software, fluid dispersion is modeled based on the process conditions, the weather conditions and the specifications of the material release point. However, varying weather conditions throughout the year and the exact determination of the release point on the plot plan and the release elevation are problematic; these issues cause the results to be non-exact and non-integrated. Choosing the most appropriate conditions is challenging. In this paper, a scheme was provided to select the most appropriate conditions for gas dispersion modeling. This scheme approaches modeling based on the worst-case scenario (the situation in which the dispersed gas reaches the detector later in comparison to the other cases). Therefore, different weather conditions, release elevations and release points on the plot plan were modeled for an absorber tower of the Gonbadli Dehydration Unit of the Khangiran Refinery. The worst case of each release condition was then chosen. Finally, gas detectors were placed using the gas dispersion modeling results based on the worst-case scenario.     

考虑非线性吸附时溶质在有限厚度粘土中的一维扩散解

在采用非线性分段式吸附等温模式的基础上,建立了溶质在粘土中的一维扩散模型,在考虑有限厚度边界及土中溶质背景浓度的条件下得到了相应的解.模型引入了移动边界以说明当溶质在粘土孔隙水中的浓度达到某一较高值后,阻滞因子将发生显著变化.算例分析表明,该模型和考虑经典非线性吸附等温线得到的结果相差不大,这进一步说明了该模型的合理性.考虑非线性吸附效应对溶质迁移有重要影响.在较高溶质浓度下采用线性吸附等温模式会得到偏不安全的结果.该解相对较简单,并可用于验证各种数值模型、拟合试验数据等.     

水中阿特拉津的气相色谱法测定

采用正已烷液液萃取方法,萃取液经320m石英弹性毛细管柱分离,用电子捕获检测器(ECD)检测水中阿特拉津,得到了良好的分离效果和较高的灵敏度及精密度,达到GB3838—2003《地面水环境质量标准》中的要求。     

电厂烟气脱硫机组改造取消GGH可行性研究分析

介绍了石灰石一石膏湿法烟气脱硫工艺及烟气换热器（简称GGH）在烟气脱硫（简称FGD）工程中的作用,指出安装GGH产生的烟囱腐蚀和增加系统故障等问题。实践证明烟气脱硫工程取消GGH对大气环境无明显影响,并且能产生较大的经济效益。     

基于技术扩散的全社会能源效率空间条件收敛分析

我国各地区能源效率存在明显的差距,如何缩小地区能源效率差距成为了能源经济领域的热点问题.本文依据2000-2010年中国30省面板数据,运用空间误差条件β收敛模型分析了技术扩散对全社会能源效率收敛的影响,研究结果表明:①2000-2010年间,全社会能源效率呈现2000-2002、2002-2005和2005-2010的三阶段特征,经历上升、下降、再上升的变化过程,其中,2005-2010年提升速度最快,其经验值得借鉴;②全社会能源效率的绝对β收敛呈现由收敛至发散的三阶段变化过程;③全社会能源效率存在显著的空间滞后现象,其增长率的空间相依性不显著,但空间因素对全社会能源效率β收敛的正面影响有加强的趋势;④技术扩散从总体上使全社会能源效率的收敛速度提高1.8倍以上,且影响程度逐渐增强;⑤外商直接投资有助于提升全社会能源效率及其收敛速度;⑥不同时段的技术扩散对全社会能源效率的影响不同,且技术引进和国内技术市场技术流入对收敛的作用不显著.因此,引进外资是缩小地区间全社会能源效率差距的重要措施.     

MTBE装置潜在危险性分析及物料泄漏扩散后果模拟研究

MTBE装置处理的物料（混合C4、甲醇）具有易燃易爆性,若发生物料泄漏,将导致装置发生火灾爆炸。为了确保装置安全平稳、长周期运行,基于MTBE装置工艺技术特点,全面系统分析了装置的潜在危险性,总结出导致装置发生火灾爆炸事故的主要因素-物料泄漏;在此基础上,采用挪威DNV公司的SAFETI定量风险评价软件,建立混合C4、甲醇泄漏扩散模型,对物料泄漏导致的主要事故类型（喷射火、池火等）进行模拟,得出泄漏扩散引发火灾爆炸事故的危害范围。结果表明：该模拟研究能够反映出泄漏扩散过程和破坏范围,取得了较真实的事故影响范围曲线图,可以为设计人员更加详细了解MTBE装置发生事故的危害性及企业加强重点部位监控、制定防范措施、编制事故应急预案提供重要参考依据。     

Effects of significant damage of flame gap surfaces in flameproof electrical apparatus on flame gap efficiency

Electrical apparatus for use in the presence of explosive gas atmospheres has to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and slits in the enclosure wall be designed to prevent a possible gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that joint surfaces have a surface roughness of <6.3 μm. Any damaged joint surface has be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable mechanical and corrosive damage before the flame gaps no longer function satisfactorily. In some cases very significant mechanical surface damage in fact improves the gap performance. This indicates that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be reduced considerably without any increase of the explosion risk.     

基于非恒定流的污染物迁移扩散随机模拟

针对目前大部分河流都受到不同程度污染的现状,研究了基于非恒定流的污染物迁移扩散随机模拟方法。通过一维非恒定流数值计算和流场模拟,得到了水库开闸放水后下游各个断面的水位、流量、流速等数据,并以此为基础,利用蒙特卡洛法对水库开闸放水前后下游典型断面的COD和NH3-N等进行污染物迁移扩散随机模拟,并将模型应用于文峪河下游。结果表明,文峪河水库开闸放水后,COD和NH3-N的污染带长度和宽度均有不同程度的减小,污染带向排污一侧岸边集中。研究成果可为解决河流污染现状与水库调度提供参考。