The Effects of Gas Flow Rate and the Interval Time of Water Supplement on Ethanol Production of Rice Straw by Simultaneous Saccharification and Fermentation

In the present work, characteristics of ethanol production from a single particle composing of pretreated rice straw, cellulase, and β-glucosidase were invesitgated by simultaneous saccharification and fermentation (SSF). The experiment experienced a start-up stage for S. cerevisiae biofilm formation, which was operated at an initial pH value of 4.8 for yeast solution, culture temperature of 30°C, flow rate of 0.8 mL/min for yeast solution, and stably operating stage for ethanol production at a culture temperature of 30°C. Investigations found that the maximal ethanol yield of 9.7 mg/g and the biofilm thickness of 0.37 mm were obtained at 30 mL/min of carrier gas flow rate. Also, the optimal interval time of water supplement was 4 h for SSF. The results show that the appropriate gas flow rate and the interval time of water supplement can keep the high activities of biofilm and enzymes during SSF and result in a high ethanol yield.     

Experimental study on CO2/CF3I suppression of methane-air explosion and flame propagation

To explore the inhibitory effects of CF₃I and CO₂ gas on the explosion pressure and flame propagation characteristics of 9.5% methane, a spherical 20 L experimental explosion device was used to study the effect of the gas explosion suppressants on the maximum explosion pressure, maximum explosion pressure rise rate and flame propagation speed of methane. The results indicated that with a gradual increase in the volume fraction of the gas explosion suppressant, the maximum explosion pressure of methane and maximum explosion pressure rise rate gradually decreased, and the time taken to reach the maximum explosion pressure and maximum explosion pressure rise rate was gradually delayed. At the same time, the flame propagation speed gradually decreased. Additionally, the time taken for the flame to reach the edge of the window and the time taken for a crack as well as a cellular structure to appear on the flame surface was gradually delayed. The fluid dynamics uncertainty was suppressed. The explosion pressure and flame propagation processes were markedly suppressed, but the flame buoyancy instability was gradually enhanced. By comparing the effects of the two gas explosion suppressants on the pressure and flame propagation characteristics, it was found that at the same volume fraction, trifluoroiodomethane was significantly better than carbon dioxide in suppressing the explosion of methane. By comparing the reduction rates of the characteristic methane explosion parameters at a volume fraction of 9.5%, it was observed that the inhibitory effect of 4% trifluoroiodomethane on the maximum explosion pressure was approximately 4.6 times that of the same amount of carbon dioxide, and the inhibitory effect of 4% trifluoroiodomethane on the maximum explosion pressure rise rate and flame propagation speed was approximately 2.7 times that of the same amount of carbon dioxide. The addition of 0.5%–1.5% trifluoromethane to 4% and 8% carbon dioxide can improve the explosion suppression efficiency of carbon dioxide. This enhancing phenomenon is a comprehensive manifestation of the oxygen-decreasing effect of carbon dioxide and the trifluoroiodomethane-related endothermic effect and reduction in key free radicals.     

Experimental study on inert products,moisture, and particle size effect on the minimum ignition energy of combustible dusts

Handling combustible dusts not only continues to pose a risk to industry but can also affect the safety of society. Explosion risk could be avoided or mitigated trying to guarantee inherent safety throughout the product life chain. One way to reduce the risks when dealing with combustible dust is to increase the Minimum Ignition Energy (MIE) in order to decrease combustible dust ignition sensitivity. To achieve this decrease, the inertization technique, also known as moderation, will be used. It consists of adding inert powders or humidity to the combustible dust. As sometimes end-users also must deal with the handling of flammable dusts, this study aims to find the most optimal inert for toner waste from printers and Holi powder (organic coloured dust from Indian parties), taking Lycopodium as a reference. Calcium carbonate, sodium bicarbonate and gypsum are proposed as inert materials. In addition, with the aim of giving a second use to biomass boiler waste or boiler slagging, this waste will be analyzed as inert, as well as how humidity affects the combustible dusts. Then, sodium bicarbonate will be tested at different granulometries to evaluate the effect of particle size on moderation process. The tests were carried out in the modified Hartmann apparatus or MIKE 3.0. Mechanisms such as decomposition of inert dust have been analyzed by thermogravimetric analysis (TGA)). The results show that gypsum and moisture are the best performing inert followed by calcium carbonate. Boiler slagging and solid bicarbonate contribute to a decrease in the MIE in some of the tests. The reasons for this deviation are discussed in the presented article. When sodium bicarbonate is analyzed at different particle sizes, it is found that the optimum particle size does not match the particle size of the combustible dust. According to the tests, there is an optimum point for which the inert powder provides better results.     

Analysis on research trends with dust explosions by bibliometric approach

Highly destructive combustible dust explosions, which is prone to cause secondary explosion, has been a concern in industrial processes. To understand the current development and status of research on dust explosions, 1276 publications related to dust explosions from 1998 to 2021 were indexed through the Web of Science Core Collection database. CiteSpace and VOSviewer were used to visualize and analyze the collected literature information. The number of articles related to dust explosions has increased from 12 in 1998 to 191 in 2021. China, the United States, and Canada are the major contributors in this field. Dalhousie University, Beijing Institute of Technology, and Dalian University of Technology are at the core of dust explosion research. Wei Gao, Paul Amyotte, and Chi-Min Shu are the most prolific researchers. Journal of Loss Prevention in the Process Industries, Powder Technology, and Process Safety and Environmental Protection are the major sources of publications related to dust explosions. The research topic of dust explosions mainly evolves into four aspects: explosion characteristics and influencing factors, research media, explosion suppression, and numerical simulation. New research hotspots have appeared related to gas–dust hybrid mixtures, nanomaterials, and powder suppressants. The results can help researchers in the dust explosion field to quickly determine the research frontier and the overall situation.     

Building urban gas process safety management (UG-PSM) system: Based on root cause analysis with 160 urban gas accidents in China

Urban safety is significantly impacted by the complexity of urban gas accidents. Although China has put forward the goal of “zero fatalities in accidents” for urban gas, unfortunately, the root causes of the unsound safety culture and imperfect safety management system of urban gas enterprises remain unresolved. Therefore, statistical analysis and 24Model analysis of 160 urban gas accidents in mainland China were performed to investigate the proximate causes of the accidents and the current situation of urban gas safety. The CCPS's risk-based process safety elements were used to identify potential deficiencies in the current urban gas process safety management (UG-PSM). During the analysis, it was observed that insufficient implementation of concealed danger investigation and rectification accounted for 76%, which is the primary proximate cause of urban gas accidents. Stakeholder outreach is the most under-represented competency in urban gas safety management. Based on the results, a novel framework for the UG-PSM system was constructed, and the theory of urban gas safety management was further improved. Furthermore, we evaluated the matching degree between UG-PSM elements and the existing measures of the government, urban gas associations, third-party organizations, and urban gas enterprises. Finally, we analyzed the feasibility, challenges, and development directions of the UG-PSM system. This study establishes a foundation for researchers and practitioners in the future research and practice of urban gas process safety and provides theoretical guidance for preventing high-incidence accidents of urban gas in China.     

Towards eliminating systematic errors caused by the experimental conditions in Biochemical Methane Potential (BMP) tests

The Biochemical Methane Potential (BMP) test is increasingly recognised as a tool for selecting and pricing biomass material for production of biogas. However, the results for the same substrate often differ between laboratories and much work to standardise such tests is still needed. In the current study, the effects from four environmental factors (i.e. ambient temperature and pressure, water vapour content and initial gas composition of the reactor headspace) on the degradation kinetics and the determined methane potential were evaluated with a 2⁴ full factorial design. Four substrates, with different biodegradation profiles, were investigated and the ambient temperature was found to be the most significant contributor to errors in the methane potential. Concerning the kinetics of the process, the environmental factors’ impact on the calculated rate constants was negligible. The impact of the environmental factors on the kinetic parameters and methane potential from performing a BMP test at different geographical locations around the world was simulated by adjusting the data according to the ambient temperature and pressure of some chosen model sites. The largest effect on the methane potential was registered from tests performed at high altitudes due to a low ambient pressure. The results from this study illustrate the importance of considering the environmental factors’ influence on volumetric gas measurement in BMP tests. This is essential to achieve trustworthy and standardised results that can be used by researchers and end users from all over the world.     

Unique products from the reaction of naphthalene with the hydroxyl radical

Many of the products of the reaction of naphthalene (Naph) with the OH radical in a reaction chamber were identified. Previously unidentified products included 1,2-naphthoquinone (NQ), oxygenated indenes and benzopyrones. Possible pathways for the formation of 1,2-NQ and 1,4-NQ are proposed. In the chamber reactions, more 1,2-NQ than 1,4-NQ partitioned to the particle phase. From this result we infer that, in the atmosphere, the percentage of 1,2-NQ in the particle phase should be greater than that for the 1,4-NQ. Because both of these compounds are considered to be toxic, and since they appear in both the gas and particle phases in the reaction chamber, and by implication in the atmosphere, it is considered important that both the gas and particle phases of these two compounds should be measured to assess their impact on human health.     

Recovery of ammonia from poultry litter using flat gas permeable membranes

The use of flat gas-permeable membranes was investigated as components of a new process to capture and recover ammonia (NH₃) in poultry houses. This process includes the passage of gaseous NH₃ through a microporous hydrophobic membrane, capture with a circulating dilute acid on the other side of the membrane, and production of a concentrated ammonium (NH₄) salt. Bench- and pilot-scale prototype systems using flat expanded polytetrafluoroethylene (ePTFE) membranes and a sulfuric acid solution consistently reduced headspace NH₃ concentrations from 70% to 97% and recovered 88% to 100% of the NH₃ volatilized from poultry litter. The potential benefits of this technology include cleaner air inside poultry houses, reduced ventilation costs, and a concentrated liquid ammonium salt that can be used as a plant nutrient solution.     

PTR-MS measurements and analysis of models for the calculation of Henry's law constants of monosulfides and disulfides

Sulfides are known for their strong odor impact even at very low concentrations. Here, we report Henry’s law constants (HLCs) measured at the nanomolar concentration range in water for monosulfides (dimethylsulfide, ethylmethylsulfide, diethylsulfide, allylmethylsulfide) and disulfides (dimethyldisulfide, diethylsulfide, dipropylsulfide) using a dynamic stripping technique coupled to Proton Transfer Reaction-Mass Spectrometry (PTR-MS). The experimental data were compared with literature values and to vapor/solubility calculations and their consistency was confirmed employing the extra-thermodynamic enthalpy-entropy compensation effect. Our experimental data are compatible with reported literature values, and they are typically lower than averaged experimental literature values by about 10%. Critical comparison with other freely available models (modeled vapor/solubility; group and bond additivity methods; Linear Solvation Energy Relationship; SPARC) was performed to validate their applicability to monosulfides and disulfides. Evaluation of theoretical models reveals a large deviation from our measured values by up to four times (in units of M atm⁻¹). Two group contribution models were adjusted in view of the new data, and HLCs for a list of sulfur compounds were calculated. Based on our findings we recommend the evaluation and adaption of theoretical models for monosulfides and disulfides to lower values of solubility and higher values of fugacity.     

Metal Pollution Assessment of Surface Sediments Along a New Gas Pipeline in the Niger Delta (Nigeria)

Chromium, nickel, copper, zinc and cadmium were determined in sediments of the Niger Delta (Nigeria) in order to discriminate between natural metal sources and anthropogenic ones. Surface sediments were collected at seven sites along a new gas pipeline near Port Harcourt, between the New Calabar River and the Bonny River towards Bonny town. Chemical characterisation is obtained by hydrofluoric–nitric acid digestion procedure, providing the ‘total’ (‘residual’) metal contents. Information about the anthropogenic metal fraction was obtained by cold diluted hydrochloric acid extraction procedure. This ‘labile’ acid soluble fraction of metals, perhaps due to relatively recent inputs in the sediments, constitutes the fraction more likely to be available to marine organisms, and furnishes a first evaluation of the possible toxicity of sediments of this sensitive ecosystem. Zinc appears to be the most available of all the heavy metals: its ‘labile’ fraction attains 40–50% of the ‘total’ zinc in sediment. Sites near Port Harcourt city are the most contaminated. All the examined metals are one order of magnitude below the respective values proposed as a limit for toxicity and are comparable with those observed by other authors in similar Niger Delta areas. Some anomalous data found near Port Harcourt city suggest that zinc and cadmium are the metals that require further monitoring. Their anthropogenic source could be derived from urban and industrial sewage.