SUSTAINABILITY AT THE LOCAL LEVEL: MANAGEMENT TOOLS AND MUNICIPAL TAX INCENTIVE MODEL

The implementation of sustainable development may seem a simple concept when written on paper. However to carry-out long term actions put forward by the Agenda 21 (AG21) at the local level represents one of the main challenges as municipal governments in general do not have the capacity to effectively implement the process. Regional environmental assessment (REA) has shown to be effective in supporting decision-making not only to correct environmental problems due to past unsustainable social-economic developments but also help local governments to implement sustainable actions. However this requires long-term investments of AG21 plans and projects. The allocation of regular and consistent financial resources is one of the main ingredients for the sustainable development process. But traditional plans and projects financed by national and/or international funds may not be sustainable in the long-term because they become dependent on external funding. Research demonstrate that innovative economic instruments such as ecotaxes represent a feasible alternative to sponsor local sustainability because taxes are collected permanently by the government and could be invested in continuous actions. Ecotaxes experiences have provided important reference to structure a municipal incentive model (MIM) to sponsor AG21’s environmental plans and projects on a long-term (permanent) basis. However sustainable development cannot be solely through economic investments. A comprehensive municipal environmental management scheme (MEMS) has been established to support the incentive model. The scheme seeks not only to improve local institutional framework but also incentive continuous participation of local stakeholders at all levels of society. Participatory events and the provision of incentives (educational and financial) are key to motivate society to protect the environment and support actively the sustainable development process as emphasised in the RIO-92 Conference.     

The implications of new information and communication technologies for sustainability

This paper discusses the relationship of new information and communication technologies (ICTs) and sustainable development. It deconstructs popular myths about a sustainable information society. One myth is that telework has reduced the need to travel and hence environmental pollution. The reality is that teleworkers make up only a small share of the total workforce, telework can generate new social relationships and hence the need for more travelling, work-related travel produces only a small amount of the total carbon dioxide emissions, and that the total distance travelled per employee is constantly rising. Another myth is that information economy is weightless and dematerialized which reduces environmental impacts. The energy and resource intensities of the ICT sector are indeed lower than the one of the total economy. The ICT sector also emits less CO₂ than the total economy. But the ICT sector constitutes only a small portion of the total value added and fossil fuel combustion is still the dominant activity of modern industrial economies. Some stakeholders argue that virtual products allow resource, energy, and transport savings. But burning digital music on compact discs and DVDs, printing digital articles and books, etc. results in rebound effects that cause new material and energy impacts, computers have a low life span of 2–3 years, reusable and upgradeable computers and computer equipment are hardly used and might not be as profitable as non-reusable ones, computers are consuming much energy. Alternatives such as energy consumption labels on ICTs and green ICTs that consume less energy contradict dominant economic interests. A sustainable information society is a society that makes use of ICTs and knowledge for fostering a good life for all human beings of current and future generations by strengthening biological diversity, technological usability, economic wealth for all, political participation of all, and cultural wisdom. Achieving a sustainable information society costs, it demands a conscious reduction of profits by not investing in the future of capital, but the future of humans, society, and nature.     

青岛工业与资源灰色关联分析

本文应用灰色关联分析方法研究了青岛地区主导工业对资源的依赖状态及不同工业行业之产出对各类资源投入的反应程度,以灰关联树反映工业经济与资源复合系统之整体及不同层次子系统的耦合关系,定量揭示工业经济效益主导变量与各类资源变量的动态联系,从资源高效利用的角度探讨了青岛工业产业结构调整和优化的方向及区域经济与环境效益相协调的可能途径。     

基于不同废污泥源的短程反硝化快速启动及稳定性

为探究不同废污泥源快速启动短程反硝化和实现稳定NO_2~--N积累的可行性,在3个完全相同的SBR反应器(S1、S2和S3)分别接种:实验室城市污水反硝化除磷系统排泥、城市污水厂剩余污泥及河涌底泥,比较其短程反硝化启动快慢和NO_2~--N积累特性,考察系统短程反硝化活性和NO_3~--N→NO_2~--N转化性能,并从微生物学角度分析反应器功能菌群特征.结果表明,在乙酸钠为唯一碳源、高碱度和适宜COD/NO_3~--N比进水条件下,3个SBR短程反硝化反应器在短时间内均能够成功启动,系统平均NO_3~--N→NO_2~--N转化率为S1 S2 S3(75. 92% 73. 36% 69. 90%).同时发现持续低温条件下S1和S2呈现不同程度的短程反硝化性能恶化趋势,但S3能够稳定维持良好NO_2~--N积累性能.微生物高通量测序表明,变形菌门和拟杆菌门居PD系统主导地位,3个短程反硝化反应器NO_2~--N积累关键功能菌属Thauera属丰度差异明显:S3 S1 S2(25. 09% 4. 71% 3. 60%),表明S3具备稳定高效的NO_2~--N积累性能,同时高丰度Thauera属可能是维持低温短程反硝化活性的重要原因.     

乙醇汽油与普通汽油非常规污染物排放特性对比研究

在一台满足国Ⅴ排放标准的双喷射(气口喷射+缸内直喷)汽油机上开展了燃用E10乙醇汽油(乙醇体积比为10%)对发动机非常规排放特性影响的试验研究.使用傅里叶变换红外分析仪(FTIR)测量了饱和烃、不饱和烃、芳香烃及醇、醛等非常规污染物排放量,对比分析了双喷射模式时各工况下E0和E10两种燃料的非常规排放水平.结果表明,双喷射模式下,加入乙醇有效降低了乙烯、1,3-丁二烯、苯和甲苯的排放量,但会导致乙醛排放升高.双喷射模式下,随着负荷增加,两种燃料下的1,3-丁二烯和甲苯排放呈现先升高后降低的趋势,乙烯、甲醛和苯排放则先降低后升高.乙醇能抑制1,3-丁二烯、乙烯生成,抑制效果为PFI模式优于双喷射模式,GDI模式抑制量最低.PFI和GDI模式下E10的甲醛排放均显著升高,但双喷射模式有效抑制了甲醛排放的增加.     

氨基改性生物炭负载纳米零价铁去除水中Cr(VI)

以聚乙烯亚胺（PEI）为功能单体,玉米秸秆生物炭为载体,制备了氨基改性生物炭负载型纳米零价铁（nZVI@PEI-HBC）,并利用扫描电镜（SEM）、红外光谱（FTIR）和X射线光电子能谱（XPS）等手段对材料进行了表征,分析了溶液pH、温度、材料投加量等因素对其去除Cr（VI）的影响及其去除机理.结果表明：在投加量为0.5 g·L^-1,温度为20℃,pH值为5,Cr（VI）初始浓度为20 mg·L^-1条件下,各材料对Cr（VI）的去除率大小为nZVI@PEI-HBC > nZVI > PEI-HBC > HBC.SEM显示nZVI颗粒较均匀地分散在生物炭表面,FTIR分析表明PEI改性后材料表面增加了氨基等重金属配位基团,这可能是nZVI@PEI-HBC去除Cr（VI）效果更好的原因.影响因素研究表明,材料具有较好稳定性,老化28 d后其Cr（VI）去除性能变化不大;酸性环境、升温、增大材料投加量均有利于nZVI@PEI-HBC对Cr（VI）的去除.机理研究发现,水中溶解氧加速了nZVI的腐蚀和Fe（II）的释放,促进Cr（VI）还原为Cr（III）,然后通过共沉淀作用和氨基等基团的吸附作用被去除.     

焦化废水处理过程中固相物质的形成及处置方法评价

焦化废水处理过程中产生的焦油、污泥和结晶杂盐等固相物质,既有资源属性,又有污染特性,但目前缺乏基于能源、经济及环境影响方面的评估.本研究阐述了3类固相物质的形成机制,建立了质量当量计算及处置方法评价模型.以宝武集团韶关钢铁股份有限公司焦化厂（二期）焦化废水处理工程的A/O/H/O（厌氧/好氧/水解/好氧）流化床工艺作为考察对象,利用工程运行参数和水质统计数据进行固相物质的产量推算,结果发现,焦油、物化污泥、生物污泥（含水率为80%）和工业杂盐的产率分别为0.186、5.80、4.24和1.97 kg·m^-3.通过处置方法评价模型明确了焦油焚烧、污泥热解、结晶杂盐分盐提纯后工业应用是最佳处置方案,在60 m³·h^-1废水处理规模的固相物质处置过程中,每年约产生1177 MWh的能源,获得135.0万元的经济效益,排放627.0 t CO₂,表明能源回收、经济效益和环境影响的协同存在.