Impact analysis of drought, water excess and salinity on grass production in The Netherlands using historical and future climate data

The coupled SWAP-WOFOST model was used to study the effects of increasing salinity of groundwater, drought and water excess on grass production in The Netherlands. WOFOST simulates crop growth and SWAP simulates transport of water, solutes and heat in the vadose zone. The model was tested using several datasets from field experiments. We applied the models at regional scale where we quantified the impact of various groundwater salinity levels on grass growth and production using historical weather data (1971-2000). The salt concentrations in the subsoil were derived from the National Hydrological Instrument. The results show that salinity effects on grass production are limited. In wet years the excess rainfall will infiltrate the soil and reduce salt water seepage. In a next step we used future weather data for the year 2050, derived from 3 Global Circulation Models. From each model we used data from two CO₂ emission scenarios. As expected higher temperatures increased drought stress, however, the production reduction as a result of salt water in the root zone is limited. Salt stress mainly occurred when irrigation was applied with saline water. The increased CO₂ concentration in combination with the limited drought stress resulted in increasing simulated actual and potential yields. Overall conclusion for grassland in The Netherlands: drought stress is stronger than stress caused by water excess which on its turn is stronger than salinity stress. Future water demand for irrigation may increase by 11-19% and result in water scarcity if water supply is insufficient.     

加压气浮法处理含油废水中溶气压力对出水水质的影响与应用研究

以实际工作中的含油废水为研究对象,采用加压气浮处理工艺,通过多年的实际应用与对监测数据的分析,总结出气浮压力对气浮处理效果的影响,通过对溶气罐压力的调整,可得到最佳的出水水质。该项研究结果操作方便、处理效率高、易于控制、对今后的工作具有指导意义,有很好的推广价值。     

南京理工大学高压实验室及其研制高压水射流切割机

南京理工大学高压实验室自８０年代初建立以来，在高压容器及武器发射管的自紧理论和工程应用、高压零部件研制、高压传感器和信号放大显示系统、高压介质等方面做了大量的工作。９３年以来，进行了水射流切割机的研制工作，解决了超高压缸体的动态密封、高压缸体的自增强、无触点式换向传感器、内衬不锈钢组合型高压容器等诸多问题，试制成功了水射流切割机样机。     

龙门式高压水射流快速洗消装置的研究

介绍了龙门式高压水射流快速洗消装置的系统组成、系统主要参数的确定,系统的工作过程;计算分析了系统水力特性、工作参数与应用。     

在役压力容器缺陷处理

介绍了在役压力容器常见缺陷以及它们的处理方法。     

流体动力系统噪声控制研究

以泵为例分析了液压动力系统中噪声产生的机理和危害，结合多年来的生产经验，给出降低和控制液压动力系统噪声的思路和几种基本方法。     

黄土与砂土液化特性的对比──土液化与减灾防灾

基于系统的试验 ,总结已有成果 ,研究了饱和黄土和砂土液化在液化机理、液化判别标准、影响液化的因素、孔压和应变的发展等方面的异同之处。研究表明 ,由于在液化机理上存在差异 ,导致二者动荷载下的孔压和应变发展特点有显著差别 ;同一因素对二者液化性状的影响可能相似 ,也可能不同 ;在动三轴液化试验中 ,黄土和砂土均可采用初始液化作为液化的判别标准。     

亚甲蓝湿式氧化影响因素研究

以湿式氧化技术对亚甲蓝水溶液进行处理,用水样COD去除率评价处理效果.考察了反应时间、温度、氧分压、搅拌速度、进水pH值以及进水浓度对处理效果的影响,并进行机理分析.实验确定的最佳操作工艺条件为:反应温度210℃、氧分压2.0 MPa、搅拌速度880 r/min、进水pH=11.30.在此条件下,COD为2 000mg/L的亚甲蓝水溶液,反应90min时COD去除率达93.2%.     

雷管自动装配线上袋式除尘器的设计和研究

以军民两用雷管主要填充物黑索金为研究对象,详细论述了小型低压脉冲袋式除尘器在雷管自动装配线上的应用,及该结构中几个关键点的设计。     

长袋低压脉冲除尘器的创新与发展

依靠科技进步，应用多项专利技术，研制与开发的LFDM型长袋低压脉冲除尘器，成功应用于冶金、有色、建材、电力、机械和矿业等行业的工业气体除尘与净化；具有明显的达标排放和占地小、阻力低、投资省、运行费用少等特点。