絮凝法分离谷氨酸菌体的研究

采用絮凝法对味精发酵生产过程中发酵液中的菌体进行研究，得到无机凝聚剂与高分子絮凝剂复合配比使用是发酵液去除菌体的有效办法。对复合用药除菌后的谷氨酸发酵液和原谷氨酸发酵液进行谷氨酸回收的比较，谷氨酸的回收率提高了8．8％。     

小径薄壁管射线透照布置方法

小径薄壁管广泛用于工艺管道中，在对其进行无损探伤时，一般采用双壁双影椭圆成像法和双壁重叠成像法，针对小径薄壁管对接焊缝透照成像的特殊要求，具体介绍双壁双影椭圆成像法的透照布置方法。     

环己烷氧化废碱液的回收利用

介绍了一种从环己烷氧化废碱液中回收高价值有机酸的新方法。用氢氧化钠碱熔处理废碱液中的羟基己酸及其聚合物，可使废碱液中己二酸的质量分数由3．18％提高到8．74％，且环境效益和经济效益显著。     

Starch, Poly(lactic acid), and Poly(vinyl alcohol) Blends

Research on biodegradable materials has been stimulated due to concern regarding the persistence of plastic wastes. Blending starch with poly(lactic acid) (PLA) is one of the most promising efforts because starch is an abundant and cheap biopolymer and PLA is biodegradable with good mechanical properties. Poly(vinyl alcohol) (PVOH) contains unhydrolytic residual groups of poly(vinyl acetate) and also has good compatibility with starch. It was added to a starch and PLA blend (50:50, w/w) to enhance compatibility and improve mechanical properties. PVOH (M_W 6,000) at 10%, 20%, 30%, 40%, 50% (by weight) based on the total weight of starch and PLA, and 30% PVOH at various molecular weights (M_W 6,000, 25,000, 78,000, and 125,000 dalton) were added to starch/PLA blends. PVOH interacted with starch. At proportions greater than 30%, PVOH form a continuous phase with starch. Tensile strength of the starch/PLA blends increased as PVOH concentration increased up to 40% and decreased as PVOH molecular weight increased. The increasing molecular weight of PVOH slightly affected water absorption, but increasing PVOH concentration to 40% or 50% increased water absorption. Effects of moisture content on the starch/PLA/PVOH blend also were explored. The blend containing gelatinized starch had higher tensile strength. However, gelatinized starch also resulted in increased water absorption.     

SEDIMENT OXYGEN DEMAND IN THE ARROYO COLORADO RIVER1

ABSTRACT: The lower reaches of the Arroyo Colorado have historically failed to meet their use under subsection 303(b) of the U.S. Clean Water Act due to fecal coliform bacteria and low dissolved oxygen (DO). Fish kills, especially at the tidal confluence at the Port of Harlingen, Texas, have been reported. Oxygen demand from sediment (SOD) for a river typically has two states‐diffusion limited SOD (SOD) and potential SOD (pSOD), expressed when sediment is resuspended through increased flow or other disturbances. The objective of this research was to measure SOD in the Arroyo Colorado River in situ, estimate pSOD ex situ, and evaluate the relationship between SOD and the depositional environment. We measured SOD and pSOD in the Arroyo Colorado River at up to eight sites over three sampling events. We identified the sample sites based on a modified Rosgen geomorphic index for streambed stabilization. Sites with high sediment deposition potential had high SOD. The average values of SOD between sites were 0.62 g/m²/day (standard deviation 0.38 g/m²/day) and ranged from 0.13 to 1.2 g/m²/day. Potential SOD values ranged from as low as 19.2 to as high as 2,779 g/m³ sediment/ day. Potential SOD can serve as an indicator of the possible impact of SOD from resuspended sediment in stream systems.     

废水中甲酸萃取回收的研究

以ＺＹＭ混合溶剂为萃取剂，以含４．５％的甲酸的废水进行萃取试验，结果表明，ＺＹＭ具有良好的热稳定性和再生性，对废水中的甲酸有较高的萃取率。采用本萃取技术，不但具有显著的环境效益，而且还可回收甲酸，获得较好的经济效益。     

旱涝灾害的一些基本问题初探

首先就旱涝灾害对人类的作用进行了分析，认为它影响范围最大，危害程度最深．其次．对旱涝灾害的成因、确定旱涝灾害的定量指标以及评估旱涝灾害的指标体系进行分析探讨；最后对国内防御旱涝灾害的能力做了总体评价，并对其所采取的预防，救抗灾措施等进行分析．     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

Synthesis of poly(hydroxyalkanoate) from hydrolyzed linseed oil

Pseudomonas putida was grown on a mixture of long-chain fatty acids obtained by hydrolysis of linseed oil. A poly(3-hydroxyalkanoate) containing 51.2% of unsaturated monomers was obtained. A considerable percentage (13.6%) was constituted by C₁₄ and C₁₆ monomers containing three double-bonds in the side chains. The polymer showed a high tendency to crosslink when it was kept in presence of air. In the crosslinked polymer no polyunsaturated monomers could be detected.