用烧结法从沸腾炉渣中提取铝和铁的研究

把沸腾炉渣和石灰及精煤混合制成小球,然后在大约1 000 ℃下烧结.取不同烧结时间的样品用硫酸浸取,得到含有铝离子和铁离子的溶液.试验表明,采用浓度为4 mol/l的硫酸,在80 ℃下浸取烧结球样品(50%沸腾炉渣∶40%精煤∶10%石灰)24 h,可以得到铝和铁的最大提取率,分别为86.50%和94.60%.滤渣可以作为固化材料用于高速公路的路基建设或水泥生产中的添加剂.     

NITROGEN CONTENT AND ACIDITY OF RAIN ON THE GEORGIA COAST1

ABSTRACT: Since nitrogen is a nutrient frequently in short supply in coastal ecosystems, an estimate of the nitrogen input via rain was made for the Georgia coast. Water samples collected in 34 separate storms during a 12 month period were analysed for concentrations of ammonia, nitrate plus nitrite, and dissolved organic nitrogen (DON). The range and average concentration in micromoles of nitrogen per liter was 0.0 to 137 (6.3) for ammonia, 1.0 to 21 (7.9) for nitrate plus nitrite, and 0.0 to 13.6 (4.0) for DON. DON, not usually measured in rain, comprised up to 62% of the total nitrogen content. The annual amount of nitrogen contributed by rain to the coast was about 0.3 g N/m². This value is a small fraction of the calculated nitrogen requirements of coastal plants. More than half the rain samples had pH values less than the CO₂ equilibrium pH of 5.6. Values as low as 4.2 were in the range of pH values reported for acid rain in Europe and the northeastern U.S. Total titratable acidity was measured for 12 summer rainwater samples. The results fox 7 individual storms showed a highly linear relation between hydrogen ion concentration and total acidity. However, the elope of the regression line indicated that increases in acidity were not a result of addition of strong acid alone.     

THE FATE OF NITRATE IN LAKE SEDIMENT COLUMNS1

ABSTRACT: To investigate the magnitude of denitrification and assimilatory nitrate reduction as these reactions relate to the fate of nitrate reaching sediments via groundwater seepage, undisturbed core samples of sediments (40 cm length) from two lakes (Mendota and Tomahawk) were leached from the bottom (at 1.4 cm/day) with a solution of ¹⁵N-nitrate (10 mg N/liter). The sediment columns were fitted with Pt electrodes to measure the oxidation-reduction (Eh) potential. While leaching removed considerable ammonium-N and soluble organic N, essentially no ¹⁵N had passed through the columns by 50 days. The Eh readings indicated that denitrification was occurring in the lower portions of the columns. The ¹⁵N distribution of the sediment N after 50 days showed that about 15 to 26% of the added nitrate-N was converted to organic N and ammonium-N. The data show that denitrification can be a significant N sink in seepage lakes.     

Thermal and hydrometallurgical recovery methods of heavy metals from municipal solid waste fly ash

Heavy metals in fly ash from municipal solid waste incinerators are present in high concentrations. Therefore fly ash must be treated as a hazardous material. On the other hand, it may be a potential source of heavy metals. Zinc, lead, cadmium, and copper can be relatively easily removed during the thermal treatment of fly ash, e.g. in the form of chlorides. In return, wet extraction methods could provide promising results for these elements including chromium and nickel. The aim of this study was to investigate and compare thermal and hydrometallurgical treatment of municipal solid waste fly ash. Thermal treatment of fly ash was performed in a rotary reactor at temperatures between 950 and 1050 °C and in a muffle oven at temperatures from 500 to 1200 °C. The removal more than 90% was reached by easy volatile heavy metals such as cadmium and lead and also by copper, however at higher temperature in the muffle oven. The alkaline (sodium hydroxide) and acid (sulphuric acid) leaching of the fly ash was carried out while the influence of temperature, time, concentration, and liquid/solid ratio were investigated. The combination of alkaline-acidic leaching enhanced the removal of, namely, zinc, chromium and nickel.     

Method of Testing the Penetration of Acid Solutions Through Safety Gloves

Because they cause burns that are difficult to heal, acids are dangerous, and steps should be taken to ensure that the human skin does not come into contact with them. For this purpose safety gloves are generally used by workers who have to handle acids. Such gloves need to be tested to ensure that they are acid resistant. Standard EN 374 (European Committee for Standardization [CEN], 1993c) specifies a method of testing the permeation of liquid chemicals, on a molecular level, through glove material, but it may be difficult to ensure the fitness of the joints of a two-compartment cell, when gloves are lined with jersey. To deal with this a simple pH-meter method to test the permeation of acid and alkali solutions through safety gloves has been developed. The permeation of H₂S0₄, HCI, HN0₃, and CH₃COOH through gloves made from neoprene, nitrile, and PVC was tested. This method seems to be simple and economical.     

Formation of Soluble Complexes of Metals with Humic Acid and Its Environmental Significance

In order to investigate the role of functional groups present in humic acid(s) (HA) during complex formation, water soluble complexes between HA isolated from soil and metals (Pb, Ca, As, Ni, Cr, Co, Cu, Cd, Fe, Mn, Mg and Zn) were prepared and subjected to infrared (IR) spectroscopy. the IR data revealed the involvement of the - OH group of humic acid in complex formation with all metals except copper and arsenic, whereas the - COOH group of HA was found to be the preferred site of binding for all the metals. the significance of findings in relation to detoxification of environmental pollutants is discussed in this paper.     

Communication ecology of webbing clothes moth: 4. Identification of male- and female-produced pheromones

Summary. We investigated the hypothesis that aggregation signals produced by male webbing clothes moths (WCM), Tineola bisselliella (Hum.) (Lepidoptera: Tineidae), and close-range male attractant signals produced by females have a pheromonal basis, at least in part. Gas chromatographic-electroantennographic detection (GC-EAD) and GC-mass spectrometric analyses of bioactive methanolic extracts of male WCM disclosed three candidate pheromone components: hexadecanoic acid methyl ester (16:Ester), (Z)-9-hexadecenoic acid methyl ester (Z9—16:Ester), and octadecanoic acid methyl ester (18:Ester). In bioassay experiments in a large Plexiglas™ arena, a blend of synthetic 16:Ester plus Z9—16:Ester was attractive to male and virgin (but not mated) female WCM; the 18:Ester was inactive. GC-EAD analyses of pheromone gland extracts from female WCM revealed (E,Z)-2,13-octadecadienal (E2Z13—18:Ald) and (E,Z)-2,13-octadecadienol (E2Z13—18:OH) as candidate sex pheromone components. In arena bioassay experiments, 1—5 female equivalents of synthetic E2Z13—18:Ald (0.2 ng) and E2Z13—18:OH (0.1 ng) were more attractive to male WCM than were two virgin female WCM. We anticipate that the combination of aggregation and sex pheromones, male-produced sonic aggregation signals, and habitat-derived semiochemicals will be highly effective in attracting male and female WCM to commercial traps. Received 12 January 2001; accepted 8 June 2001.     

草酸对Cr胁迫下李氏禾解毒性能的影响

结合因子分析方法分析了草酸对Cr胁迫下李氏禾解毒性能的影响。研究过氧化氢酶(CAT)、可溶性糖、生长指标的变化情况,并运用因子分析方法筛选出最能表征李氏禾生长特性的指标,进而较科学的研究外源草酸对Cr胁迫下李氏禾解毒性能的影响。Cr质量浓度为0、200、400 mg/kg的土壤中,适当浓度草酸对李氏禾CAT影响表现出极显著差异(P0.01);当土壤中Cr质量浓度200 mg/kg,草酸质量浓度为80、120 mg/kg时,可溶性糖浓度分别比本组对照降低了23.59%、32.65%;株高可作为关键因子的关键变量。外源草酸可以增强李氏禾对Cr的解毒性能且与草酸浓度有关,因子分析方法可以应用于李氏禾研究中。     

混凝工艺去除重金属-腐殖酸有效性研究

考查了混凝剂对腐殖酸(HA)和重金属镉的络合体的去除效果。通过与混凝剂分别对腐殖酸和镉的单一去除比较发现:混凝剂对络合体的去除提高了HA和镉的去除率。通过调节不同环境因素发现:增加混凝剂用量,HA的去除率会在达到峰值后不再增加,而镉的去除率会在达到峰值后有所下降;提高p H值会加快HA的去除达到峰值且提高镉的去除率;腐殖酸溶液初始浓度越高,腐殖酸和镉的最终去除率越高;离子强度越高,HA和镉的最终去除率越低。     

Application of a hydroxylamine nitrate stability model to plutonium purification process equipment

A mathematical model that predicts hydroxylamine nitrate (HAN) (NH₂OH·HNO₃) stability is applied to aqueous solutions containing HAN, nitric acid and plutonium that are used in plutonium purification processes. The model estimates the stability of these solutions with respect to the rapid, hazardous, autocatalytic reaction of HAN with nitric acid that generates heat and gas. It also accounts for reaction kinetics, temperature changes, gas generation rates, solution volumes and flow rates, and distribution of plutonium and nitric acid between aqueous and organic phases. The model is applied to three typical process vessels used in solvent extraction purification of plutonium – a countercurrent aqueous/organic plutonium stripping column, an oxidation column used for HAN and hydrazine destruction, and a plutonium rework tank. Both normal and off-normal process scenarios are modeled. Two of the off-normal scenarios lead to the rapid autocatalytic reaction of HAN with nitric acid where heat and gas are generated and that could lead to damage of the process equipment and/or release of hazardous plutonium solution from the vessel. In these two cases, stationary aqueous solutions containing HAN, Pu(III), and nitric acid were allowed to slowly react until conditions for the autocatalytic reaction were reached.