水资源生态足迹分析——以安康市为例

根据生态足迹分析方法,建立了水资源生态足迹概念模型,确定了计算水资源帐户生态足迹所需的3个关键参数,即平均水资源产量、均衡因子和地区产量因子,计算了安康市1996—2007年水资源生态足迹和生态承载力。引入水资源生态足迹压力指数、万元GDP水资源生态足迹、累积水资源生态足迹等指标,利用水足迹模型评价水资源可持续发展程度的全面性和对比性。结果表明,计算结果可客观评价安康市水资源可持续发展与利用情况,为地区水资源的可持续利用与管理提供了科学的依据。     

中国能源生态足迹的时空动态特征及效应分析

运用生态足迹方法计算出1990—2007年中国能源消费的生态足迹。在此基础上,分析了能源足迹强度(EFI)、能源足迹生态压力(EPIEF)的时空动态变化特征。结果表明,近20年来我国能源足迹波动上升,能源消费结构有所改善,但煤炭足迹仍占主导,近几年又有回升趋势;能源足迹强度呈幂指数衰减,能源利用效率不断提高;EPIEF呈上升趋势,说明能源利用对自然生态系统的压力逐渐增大。在空间分布上,各省区能源足迹差异显著,能源足迹强度由西向东逐渐降低,而EPIEF则由西向东呈增大趋势。依据EPIEF指数将中国30个省区划分为能源足迹生态盈余区(EPIEF1)、生态轻度亏损区(1EPIEF5)和生态严重亏损区(EPIEF5)3种类型。     

浅析XLDM型脉冲袋式除尘器在CFB锅炉上的应用

介绍了兖矿国宏化工公司2台160 t/h CFB锅炉配套XLDM-5700型袋式除尘器的实际运行情况,从除尘效率、喷吹方式、运行能耗等方面分析了袋式除尘器的性能,并总结出XLDM型袋式除尘器最佳运行方式。     

水下公路隧道纵向疏散通道加压送风系统研究

为研究水下公路隧道纵向疏散通道加压送风系统的关键设计参数,结合纵向疏散通道的特点,借鉴一般建筑加压送风系统的设计要求,提出了纵向疏散通道内加压送风量的计算方法,并通过数值模拟方法对纵向疏散通道加压送风系统进行了研究。结果表明,利用风速法计算得到的送风量比压差法计算得到的结果大20倍左右,并且压差法计算送风量时受疏散口缝隙宽度影响较大,工程适用性差。通过数值模拟可知,疏散通道内的送风风速达到1.5m/s时即能够满足人员安全疏散要求,这与风速法计算的结果一致。研究结果可供采用纵向疏散模式的隧道疏散通道加压送风系统设计参考。     

Influence of GSTM1 and GSTT1 genotypes and confounding factors on the frequency of sister chromatid exchange and micronucleus among road construction workers

In the present study, we have investigated the influence of polymorphism of GSTM1 and GSTT1 genes and confounding factors such as age, sex, exposure duration and consumption habits on cytogenetic biomarkers. Frequency of sister chromatid exchanges (SCEs), high frequency cell (HFC) and cytokinesis blocked micronuclei (CBMN) were evaluated in peripheral blood lymphocytes of 115 occupationally exposed road construction workers and 105 unexposed individuals. The distribution of null and positive genotypes of glutathione-S transferase gene was evaluated by multiplex PCR among control and exposed subjects. An increased frequency of CBMN (7.03 ± 2.08); SCE (6.95 ± 1.76) and HFC (6.28 ± 1.69) were found in exposed subjects when compared to referent (CBMN - 3.35 ± 1.10; SCE - 4.13 ± 1.30 and HFC - 3.98 ± 1.56). These results were found statistically significant at p < 0.05. When the effect of confounding factors on the frequency of studied biomarkers was evaluated, a strong positive interaction was found. The individuals having GSTM1 and GSTT1 null genotypes had higher frequency of CBMN, SCE and HFC. The association between GSTM1 and GSTT1 genotypes and studied biomarkers was found statistically significant at p < 0.05. Our findings suggest that individuals having null type of GST are more susceptible to cytogenetic damage by occupational exposure regardless of confounding factors. There is a significant effect of polymorphism of these genes on cytogenetic biomarkers which are considered as early effects of genotoxic carcinogens.     

电—袋复合除尘器捕集微细粒子的理论浅析

依据袋式除尘器的捕集机理,定性分析了静电力对增强电—袋复合除尘器捕集亚微米微细粒子能力以及降低袋式除尘器压力损失的影响,为进一步研究电—袋复合除尘器过滤机制提供参考。     

Use of a food web model to evaluate the factors responsible for high PCB fish concentrations in Lake Ellasjøen, a high Arctic Lake

Background, aim, and scope

Lake Ellasjøen, located in the Norwegian high arctic, contains the highest concentrations of polychlorinated biphenyls (PCBs) ever recorded in fish and sediment from high arctic lakes, and concentrations are more than 10 times greater than in nearby Lake Øyangen. These elevated concentrations in Ellasjøen have been previously attributed, in part, to contaminant loadings from seabirds that use Ellasjøen, but not Øyangen, as a resting area. However, other factors, such as food web structure, organism growth rate, weight, lipid content, lake morphology, and nutrient inputs from the seabird guano, also differ between the two systems. The aim of this study is to evaluate the relative influence of these factors as explanatory variables for the higher PCB fish concentrations in Ellasjøen compared with Øyangen, using both a food web model and empirical data.

Methods

The model is based on previously developed models but parameterized for Lakes Ellasjøen and Øyangen using measured data wherever possible. The model was applied to five representative PCB congeners (PCB 105, 118, 138, 153, and 180) using measured sediment and water concentrations as input data and evaluated with previously collected food web data.

Results

Modeled concentrations are within a factor of two of measured concentrations in 60% and 40% of the cases in Lakes Ellasjøen and Øyangen, respectively, and within a factor of 10 in 100% of the cases in both lakes. In many cases, this is comparable to the variability associated with the data as well as the efficacy of the predictions of other food web model applications.

Discussion

We next used the model to quantify the relative importance of five major differences between Ellasjøen and Øyangen by replacing variables representing each of these factors in the Ellasjøen model with those from Øyangen, in separate simulations. The model predicts that the elevated PCB concentrations in Ellasjøen water and sediment account for 49%–58% of differences in modeled fish PCB concentrations between lakes. These elevated sediment and, to a lesser extent, water concentrations in Ellasjøen are due to PCB loadings from seabird guano. However, sediment–water fugacity ratios of PCBs are consistently greater in Ellasjøen compared with Øyangen, which suggests that internal lake processes also contribute to differences in sediment and water concentrations. We hypothesize that the nutrients associated with guano influence sediment–water fugacity ratios of PCBs by increasing the stock of pelagic algae. As both these algae and the guano settle, their organic carbon content is degraded faster than PCBs, which causes an extra magnification step in Ellasjøen before these detrital particles are consumed by benthic organisms, which are in turn consumed by fish. The model predicts that the remaining ～50% of the differences in PCB concentrations observed between the fish of these lakes are due to other subtle differences in their food web structures.

Conclusions

In conclusion, based on the results of a food web model, we found that the most dominant factors influencing the higher PCB fish concentrations in Lake Ellasjøen compared with Øyangen are the higher sediment and water concentrations in Ellasjøen, caused by seabird guano. Together, sediment and water are predicted to account for 49%–58% of differences in fish concentrations between lakes. Although seabird guano provides a source of nutrients to the lake, in addition to contaminants, empirical data and indirect model results suggest that nutrients are not leading to decreased bioaccumulation, in contrast to what has been observed in temperate, pelagic food webs.

Recommendations and perspectives

The results of this study emphasize the importance of considering even small differences in food web structure when comparing bioaccumulation in two lakes; although the food web structures of Ellasjøen and Øyangen differ only slightly, the model predicts that these differences account for most of the remaining ～50% of the differences in PCB fish concentrations between the two lakes. This study further demonstrates the utility of food web models as we were able to predict and tease apart the influence of various factors responsible for the elevated concentrations in the fish from Lake Ellasjøen, which would have been difficult using the field data alone.     

辽河油田稠油泥砂综合处理工艺的研究*

稠油污泥作为含油污泥的典型代表,其成分极为复杂、处理难度极大,由于目前国内外尚无成熟工艺可完全实现其"减量化、资源化、无害化处理",给油田生产和环境保护带来了严重影响。文章分析了稠油污泥的组成及性质,根据稠油污泥来源不同实施分类预处理,利用热风干化技术将其减量,经热解气化焚烧和热能利用,为实现含油污泥无害化处理进行了有益探索。     

交通荷载作用下饱和软粘土孔压-应变分析模型

针对交通荷载的作用特点设计了循环三轴试验,进而对交通荷载作用下饱和软粘土的动力特件进行厂研究.结果表明:循环荷载作用下,饱和软粘土存在临界循环应力比,采用孔压曲线所得到的临界循环应力比要小于采用应变曲线所得到的临界循环应力比.当土样不存在初始剪应力时,随着循环次数的增加,土样的应力-应变关系曲线近似原点对称,但随着初始剪应力的增大,应力-应变关系曲线逐渐表现为一系列平行曲线,峰值孔压与循环孔压幅值均逐渐减少;同时,轴应变的发展加快,但循环应变幅值逐渐减小.当循环应力比小于临界循环应力比时,对于同一初始剪应力,不同循环应力比下的孔压比-动应变曲线近似集中在同一条曲线上.通过对试验数据进行回归分析,得到了交通荷载作用下饱和软粘土残余孔压-累积塑性应变关系模型.     

基于震后低压变化的供水管网功能可靠度分析

供水管网的抗震功能是指供水管网在地震作用下能够满足震后城市特定用水需要(需水量和水压)的能力。地震发生后,供水管网一般处于低压供水状态,使得管网中部分用户的水压和水量不能得到全部满足,导致管网部分节点的实际配水量小于需水量。为此,在传统的管网水力分析基础上考虑节点流量随节点水压的动态变化,通过求解非线性水力方程组,得到管网节点实际流量和水压;同时,借鉴结构可靠度分析方法,引入供水管网系统随机水力模型,给出了震后供水管网功能可靠度分析的一次二阶矩方法。以一实际管网为例,演示了震后低压供水时管网功能可靠度分析的应用方法。