再悬浮过程中河流底泥PAHs的迁移与释放

利用再悬浮模拟(particle entrainment simulator,PES)装置模拟了河流底泥在受到上层扰动力后的再悬浮过程.结果表明,沉积物性质如粒径组成及PAHs含量对沉积物再悬浮过程中PAHs的释放影响显著.再悬浮过程中上覆水体总悬浮颗粒物(total suspended solids,TSS)含量与颗粒态PAHs之间存在极显著相关关系.切应力对再悬浮过程中PAHs释放的影响体现在两方面.一方面,单位体积的颗粒态PAHs随切应力增大而增大;另一方面,悬浮颗粒上PAHs的富集效应随切应力增大而减弱,是由于切应力强烈导致吸附作用弱的大颗粒进入水体.上覆水体中的PAHs总量在一段时间上升后于120 min或240min趋于稳定,而颗粒态与溶解态之间具有良好响应.高低环PAHs释放行为差异显著,由于中高环PAHs的疏水性,上覆水体中检测到的多为3~4环个体.     

南水北调对密云水库水位变幅带土壤磷释放量的影响

南水北调来水引起的水位上涨可能会导致密云水库水位变幅带土壤中磷的释放.过量的磷可能会引起水体富营养,因此,研究水库变幅带磷释放风险对密云水库水质安全保障具有科学指导意义.本研究采用连续浸提法测定密云水库变幅带土壤及沉积物中弱吸附态磷(NH_4ClP)、铁磷(BD-P)、铝磷(NaOH-P)及钙磷(HCl-P)等4种不同形态磷含量,探讨其分布特征;并在室内进行了磷释放模拟实验,估算了南水北调来水引起水库水位上升所致的易释放磷的释放量.结果表明,NH_4Cl-P、BD-P、NaOH-P、HCl-P广泛地分布于密云水库变幅带土壤及沉积物中.在白河、内湖及潮河3个库区,磷形态分布具有一致规律,即HCl-PNaOH-PBD-PNH_4Cl-P.因密云水库变幅带为中国典型的北方碱性土壤,变幅带无机磷主要为钙磷.NH_4Cl-P在3个库区变幅带土壤中含量相差不大,在受水动扰动力影响较小的内湖库区BD-P含量略高于其它2个库区.在3个不同库区中,潜在活性磷NH_4Cl-P和较稳定的NaOH-P在岸上和水陆交界面土壤及水下沉积物中含量相差不大,受氧化还原条件影响较大的BD-P在沉积物中的含量略高于岸上和水陆交界面土壤.磷释放模拟实验及释放量估算结果表明,水库水位上涨3 m的情况下,白河、潮河和内湖库区淹没变幅带土壤分别释放1.02、0.80、0.37 mg·m~(-2)易释放磷.白河和内湖库区变幅带被水淹没土壤中磷释放的风险可能更高,需加强防护.     

底泥中营养物质及其他污染物释放机理综述

水体底泥(沉积物)污染,是世界范围内的一个重要环境问题.其污染物主要通过大气沉降、废水排放、水土流失、雨水淋溶与冲刷进入水体,最后沉积到底泥中并逐渐富集,使底泥受到严重污染.总结了底泥中氨氮、重金属的影响因素及释放机理,也指明了持久性有机污染物释放机理研究不足的现状,提出对其释放机理研究的重要性.     

Morphological characteristics of flashing jet throughout superheated liquid release

Many release problems involve two-phase releases of hazardous materials of superheated liquids with high energy into the atmosphere. Such accidents are accompanied by violent phase transition and form catastrophic flashing jets. In this work, experimental and theoretical analyses were conducted to investigate dynamic characteristics of flashing jet morphology and their dependence on pressure-decay dynamics under different storage pressures, superheats, and nozzle diameters. Flashing jet morphology and angle throughout two-phase releases were captured by a high-speed camera, and the corresponding source pressure in the superheated liquid tank was measured simultaneously. Results show that three typical phases, expansion, stabilization, and decay, are characterized throughout two-phase release based on the evolution of flashing jet morphology. The jet initially expands gradually due to the enhancement of phase transition intensity, and then keeps stable when the intensity reaches its maximum, and terminally decays rapidly due to the depletion of superheated liquid. Phase transition intensity at the nozzle exit is mainly controlled by the pressure-decay dynamics. Bubbles nucleation inception sites gradually move upstream of the nozzle during the pressure decay process increasing the phase transition intensity. The increase of storage pressure, superheat and nozzle diameter promotes the mechanical and thermodynamic effects on the jet breakup. The significant increase of mechanical and thermodynamic effects effectively accelerates droplets evaporation and further affects flashing jet morphology.     

Recent application of Computational Fluid Dynamics (CFD) in process safety and loss prevention: A review

In recent years, significant progress has been made to ensure that process industries are among the safest workplaces in the world. However, with the increasing complexity of existing technologies and new problems brought about by emerging technologies, a strong need still exists to study the fundamentals of process safety and predict possible scenarios. This is attained by conducting the corresponding consequence modeling and risk assessments. As a result of the continuous advancement of Computational Fluid Dynamics (CFD) tools and exponentially increased computation capabilities along with better understandings of the underlying physics, CFD simulations have been applied widely in the areas of process safety and loss prevention to gain new insights, improve existing models, and assess new hazardous scenarios. In this review, 126 papers from 2010 to 2020 have been included in order to systematically categorize and summarize recent applications of CFD for fires, explosions, dispersions of flammable and toxic materials from accidental releases, incident investigations and reconstructions, and other areas of process safety. The advantages of CFD modeling are discussed and the future of CFD applications in this research area is outlined.     

粗枝云杉不同径级根系分解过程中4种养分元素的释放特征

植物根系分解是养分元素进入土壤的重要途径之一.为了解径级对根系分解过程中养分元素释放的潜在影响,以川西亚高山针叶林中的粗枝云杉(Picea asperata)为对象,采用原位分解试验,研究云杉3个径级(0-2 mm,2-5 mm和5-10 mm)根系分解过程中钾(K)、钠(Na)、钙(Ca)和镁(Mg)元素的浓度、残留...     

某市给水管网中铁释放现象影响因素与控制对策分析

针对某市管网水中铁浓度的变化规律进行了系统的研究,确定了管垢向管网水中释放出的铁是管网水中铁超标的主要原因.研究中发现铸铁管和镀锌钢管中管垢的主要化学组分为铁.在给水管网中,管网水的溶解氧和余氯浓度低时,对应的管网水中铁释放现象严重,其原因是还原条件使管垢表面的致密钝化层被破坏,造成二价铁的大量释放.根据试验结果提出了给水管网中铁释放和“红水”现象的控制对策.     

水源更换对给水管网水质的影响研究

为了研究水源更换对给水管网水质的影响,对北方A市水源更换过程中管网水质理化指标进行了监测分析.通过33 h的监测发现,由于水源水质不同造成管网水质化学不稳定,管网水水质部分指标发生了明显的下降,pH从7.54降到7.18,碱度从188　mg·L^-1降到117 　mg·L^-1,氯化物从310 　mg·L^-1降到132 　mg·L^-1（以Cl^-计）,电导率从0.176　S·m^-1降到0.087 　S·m^-1,钙离子和镁离子略有下降分别为15 　mg·L^-1和11 　mg·L^-1,这些都是由于滦河水质与黄河水质不同造成的;余氯在换水过程中发生了较复杂的变化,主要是由于水源更换造成耗氯量增加以及夜间用水量少造成管网水输配时间长引起的;pH、碱度、余氯的变化使得管网水中铁的含量增加,最高达到0.4 　mg·L^-1,超出饮用水标准规定的0.3 　mg·L^-1.通过分析水源更换过程中水质的变化,提出了控制管网水质稳定的方法主要有提高pH、增加碱度、投加缓蚀剂和严格保证出厂水及管网水水质指标特别是余氯等.     

湖泊沉积物中磷化氢的释放动力学初探

采用柱状芯样模拟法,研究了太湖沉积物-水界面磷化氢的释放动力学.结果表明:当沉积物-水界面磷化氢的释放达到动态平衡时,水界面中磷化氢的浓度基本不再增大,大约在0.34 pg·l-1左右,此时磷化氢的释放通量约为0.008 pg·dm-2·h-1.根据室内模拟结果,太湖沉积物每年的磷化氢释放量在13.81-49.62 g之间,从而使磷化氢在湖水中的平均浓度达到0.16 pmol·l-1.     

潮间带沉积物/大气Hg的释放的模拟研究

研究了潮间带沉积物中的Hg向大气的释放,结果表明光照造成沉积物中的Hg快速向大气释放.光照8 h后,海泊河口和黄河口沉积物释放到大气中的Hg分别占58%和51%,其释放通量总体上遵循先升高后降低的规律,前者在13:00～14:00达到最大值2 830μg/(m2·h),后者在12:00～13:00达到最大值73μg/(m2·h);海泊河口沉积物Hg的释放通量与大气温度、沉积物温度和光照强度的相关系数分别为0.83(P＜0.05)、0.98(P＜0.01)和0.73(P＜0.05),黄河口沉积物Hg的释放通量与大气温度、沉积物温度和光照强度的相关系数分别为0.73(P＜0.05)、0.80(P＜0.05)和0.81(P＜0.01),温度、光照对沉积物Hg的释放有重要的影响.