焙烧温度对CeO_2(ZrO_2)/TiO_2选择性催化脱硝性能的影响

采用溶胶-凝胶法并以不同温度焙烧制备一系列CeO_2(ZrO_2)/TiO_2(CZT)催化剂,考察了CZT催化剂固相结构、酸量、比表面积等性能与催化活性的关系。采用XRD、BET、NH3-TPD、H2-TPR以及XPS等表征技术对催化剂进行表征。结果表明:焙烧温度为450℃时CZT催化剂具有最高的催化活性,其在240~400℃的温度窗口内活性均高于90%,且具有较好的抗水和抗硫中毒能力。随着焙烧温度的提高,催化剂表面的Ce和Zr原子进入体相晶格且Ce0.5Zr0.5O2向Ce0.75Zr0.25O2转变,导致催化剂的储释氧能力和氧化还原性能降低。另外,锐钛矿和金红石型TiO_2晶粒尺寸的增加,催化剂的有效比表面积和总酸量降低,因此CZT催化活性随着焙烧温度的提高而有所降低。换言之,大的比表面积、良好的氧化还原性能、表面Ce4+的富集以及酸性位的增多均有利于NH3-SCR活性的提高。     

地下水循环井技术处理土壤和地下水中甲基叔丁基醚研究

研究了MTBE在砂土中的静态吸附以及采用地下水循环井技术(GCW)去除砂土和地下水中MTBE的衰减规律。结果表明:MTBE在砂土中的吸附动力学符合准二级动力学方程,相关系数R2为0.99618,在砂土中的吸附平衡时间为24 h;吸附热力学符合Linear平衡吸附,吸附系数为0.00306 m3/kg。GCW运行30 h后,地下水饱和含水层中MTBE浓度由500 mg/L降至72.5 mg/L,去除率为85.5%;砂土中MTBE的吸附量由0.93 mg/g降至0.03 mg/g,去除率达96.4%。水平方向距GCW越近,MTBE的去除效率越快,垂直方向位于GCW上部的MTBE优先会被去除,最佳修复时间为运行15 h。GCW对砂土和地下水中高浓度MTBE具有良好的修复效果。     

运用批实验研究溶解氧对米酒去除硝酸盐的影响

为了判别不同溶解氧条件下脱氮效果和碳的需求量,在水温为25~30℃条件下,设置了缺氧、微氧和有氧3种输入条件,以及C/N分别为2.0、1.5两种碳源投放量开展实验。研究表明:溶解氧的存在对反硝化作用的启动有延迟作用,但影响较小。溶解氧对于反硝化过程并没有产生明显的抑制作用,但在溶解氧较低的情况下,反硝化速率更为理想。缺氧条件下,C/N的适宜值应低于1.5;微氧条件下的C/N适宜值在1.5~2.0;而在有氧条件下C/N=2.0时可高效去除硝酸盐。该研究可为农村地区家庭自行去除饮用水中硝酸盐的实际应用提供参考。     

UV/H_2O_2对氯消毒副产物TCM、DCBM的去除影响因素研究

针对UV/H_2O_2对氯化消毒副产物三氯甲烷(TCM)和一溴二氯甲烷(DCBM)的去除效果及影响因素进行研究,结果表明UV/H_2O_2方法对TCM和DCBM去除效果的影响因素有过氧化氢(H_2O_2)投加量、紫外光照强度、反应p H值和反应物初始浓度。通过不同的反应条件得出:H_2O_2在一定投加量变化范围(10~35 mmol/L)内,随投加量的增加,TCM和DCBM的去除率均呈先上升后下降趋势,H_2O_2最佳投加量分别为25,20 mmol/L;增大紫外光照(UV)强度,TCM和DCBM的去除率均显著提高;随初始p H值的增大,去除率均呈先上升后下降趋势,p H值为7.0时,去除率达到最佳;TCM和DCBM反应初始浓度分别为150,160μg/L时,其去除率最高,在有效时间内去除率分别为95.88%、92.56%。     

Effects of sludge retention time, carbon and initial biomass concentrations on selection process: From activated sludge to polyhydroxyalkanoate accumulating cultures

Four sequence batch reactors (SBRs) fed by fermented sugar cane wastewater were continuously operated under the aerobic dynamic feeding (ADF) mode with different configurations of sludge retention time (SRT), carbon and initial biomass concentrations to enrich polyhydroxyalkanoate (PHA) accumulating mixed microbial cultures (MMCs) from municipal activated sludge. The stability of SBRs was investigated besides the enrichment performance. The microbial community structures of the enriched MMCs were analyzed using terminal restriction fragment length polymorphism (T-RFLP). The optimum operating conditions for the enrichment process were: SRT of 5 days, carbon concentration of 2.52 g COD/L and initial biomass concentration of 3.65 g/L. The best enrichment performance in terms of both operating stability and PHA storage ability of enriched cultures (with the maximum PHA content and PHA storage yield (Y_PHA/S) of 61.26% and 0.68 mg COD/mg COD, respectively) was achieved under this condition. Effects of the SRT, carbon concentration and initial biomass concentration on the PHA accumulating MMCs selection process were discussed respectively. A new model including the segmentation of the enrichment process and the effects of SRT on each phase was proposed.     

磁性PEI功能化秸秆的制备及对Pb (Ⅱ)的吸附

为获得同时具有优良的吸附性能和磁分离特性的生物吸附材料,以汽爆秸秆为基质,采用戊二醛交联剂法制备了磁性聚乙烯亚胺功能化秸秆吸附剂（Fe₃O₄-PEI-RS）,通过SEM、XRD、FTIR、XPS和VSM等手段表征了材料的结构和性质,测定了Pb（Ⅱ）在Fe₃O₄-PEI-RS上的吸附性能,考察了pH、吸附时间、吸附剂投加量、Pb（Ⅱ）初始浓度、温度等因素对吸附的影响.结果表明,Fe₃O₄-PEI-RS对Pb（Ⅱ）的吸附具有强烈的pH依赖性;吸附时间对Pb（Ⅱ）的吸附效率有明显的影响,在180 min时吸附达到平衡,吸附过程符合准二级动力学模型;Langmuir和Freundlich模型都能很好地描述Pb（Ⅱ）在Fe₃O₄-PEI-RS上的吸附行为,20、30和40℃时最大吸附量分别为192.31、200.00和212.77 mg/g;热力学参数△G < 0,而焓变△H>0、△S>0,说明该吸附属于熵增加的自发吸热反应过程,升温有利于吸附.重复试验表明,EDTA作解吸剂,经5次吸附/解吸附循环后吸附剂仍能保持较高的吸附容量.研究显示,所制Fe₃O₄-PEI-RS对Pb（Ⅱ）具有较高的吸附容量,稳定性好、可循环利用,能在磁场下实现快速分离.      

Biodegradation of polycyclic aromatic hydrocarbons (PAHs) by fungal enzymes: A review

Polycyclic aromatic hydrocarbons (PAHs) are a large group of chemicals. They represent an important concern due to their widespread distribution in the environment, their resistance to biodegradation, their potential to bioaccumulate and their harmful effects. Several pilot treatments have been implemented to prevent economic consequences and deterioration of soil and water quality. As a promising option, fungal enzymes are regarded as a powerful choice for degradation of PAHs. Phanerochaete chrysosporium, Pleurotus ostreatus and Bjerkandera adusta are most commonly used for the degradation of such compounds due to their production of ligninolytic enzymes such as lignin peroxidase, manganese peroxidase and laccase. The rate of biodegradation depends on many culture conditions, such as temperature, oxygen, accessibility of nutrients and agitated or shallow culture. Moreover, the addition of biosurfactants can strongly modify the enzyme activity. The removal of PAHs is dependent on the ionization potential. The study of the kinetics is not completely comprehended, and it becomes morem hallenging when fungi are applied for bioremediation. Degradation studies in soil are much more complicated than liquid cultures because of the heterogeneity of soil, thus, many factors should be considered when studying soil bioremediation, such as desorption and bioavailability of PAHs. Different degradation pathways can be suggested. The peroxidases are heme-containing enzymes having common catalytic cycles. One molecule of hydrogen peroxide oxidizes the resting enzyme withdrawing two electrons. Subsequently, the peroxidase is reduced back in two steps of one electron oxidation. Laccases are copper-containing oxidases. They reduce molecular oxygen to water and oxidize phenolic compounds.     

Amoxicillin effects on functional microbial community and spread of antibiotic resistance genes in amoxicillin manufacture wastewater treatment system

This study aimed to reveal how amoxicillin(AMX) affected the microbial community and the spread mechanism of antibiotic resistance genes(ARGs) in the AMX manufacture wastewater treatment system. For this purpose, a 1.47 L expanded granular sludge bed(EGSB) reactor was designed and run for 241 days treating artificial AMX manufacture wastewater. 454 pyrosequencing was applied to analyze functional microorganisms in the system. The antibiotic genes OXA_(-1), OXA_(-2), OXA_(-10), TEM_(-1), CTX-M_(-1), class I integrons(intI1) and 16 SrRNA genes were also examined in sludge samples. The results showed that the genera Ignavibacterium, Phocoenobacter,Spirochaeta, Aminobacterium and Cloacibacillus contributed to the degradation of different organic compounds(such as various sugars and amines). And the relative quantification of eachβ-lactam resistance gene in the study was changed with the increasing of AMX concentration.Furthermore the vertical gene transfer was the main driver for the spread of ARGs rather than horizontal transfer pathways in the system.     

Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light

Pd-MnO_2/TiO_2 nanotube arrays(NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO_2/TiO_2 NTAs photo electrodes were analyzed by scanning electron microscopy(SEM), X-ray diffraction(XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet–visible diffuse reflectance spectrum(DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination(xenon light). The performed analyses illustrated that Pd-MnO_2 codoped particles were successfully deposited onto the surface of the TiO_2 nanotube arrays;DRS results showed significant improvement in visible light absorption which was between400 and 700 nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant(Rhodamine B) illustrated a superior photocatalytic(PC) efficiency of approximately 95% compared to the bare TiO_2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of UOH radicals.     

基于ES-VSP分布的交通状态对公交车动态排放的影响

为评估不同交通状态下公交车运行特征和排放水平的差异,现场采集广州市B9、226线路公交车的逐秒GPS数据,以ES-VSP（发动机负荷-机动车比功率）分布表征畅通、轻度拥堵和中度拥堵下的公交车运行特征,结合IVE（international vehicle emission）模型求得公交车平均排放因子并分析其差异.结果表明:①所测公交车的发动机低负荷区中bin11（-1.6 < ES ≤ 3.1,-2.9 kW/t ≤ VSP < 1.2 kW/t）频率范围为50.55%~83.39%,中度拥堵时bin 11频率是畅通时的1.1~1.3倍;② 3种交通状态下公交车的CO、VOC（运行产生的挥发性有机物）、VOC_evap（蒸发产生的挥发性有机物）、NO_x（氮氧化物）和PM（颗粒物）平均排放因子范围分别为7.63~11.40、0.26~0.46、0.68~1.56、0.32~0.51和0.72×10-2~1.28×10-2 g/km;③同种交通状态下,主干路公交车专用道和BRT车道的公交车的大部分污染物平均排放因子低于次干路混行车道、主干路混行车道,中度拥堵时主干路BRT车道的CO、VOC、VOC_evap、NO_x和PM平均排放因子相对其他道路最低,分别为7.66、0.27、0.87、0.32和0.75×10-2 g/km;④次干路混行车道、主干路混行车道的公交车污染物平均排放因子随交通状态愈加拥堵而增大,但畅通时主干路BRT车道的公交车行驶速度、加速度较高,导致CO平均排放因子较高,对应3种交通状态其比例为1.0:0.9:0.8.研究显示,交通状态对公交车运行和排放具有显著影响.