Ecotoxicity in Aliivibrio fischeri of Ibuprofen,Omeprazole and their Mixtures

The acute ecotoxic effects of ibuprofen and omeprazole and their mixture have been measured using Aliivibrio fischeri as a biomodel. The toxic effects were also tested after 5 days, and an effect-driven approach was used to analyse the results. The toxic effects of the mixtures were compared with the predictions obtained using concentration addition and independent action mathematical methods.

According to the Passino and Smith classification, the results indicate that ibuprofen can be considered slightly toxic (10<EC₅₀ <100?mg?L^-1), while omeprazole can be denoted as moderately toxic (1<EC₅₀ <10?mg?L^-1) to Aliivibrio fischeri. An overestimation of the actual ecotoxic effect of the mixture was found when the concentration addition and independent action methods were applied. Finally, the effect-driven approach indicated that the transformation products of the studied drugs should be prioritized for risk assessment purposes.     

On-board measurements of gaseous pollutant emission characteristics under real driving conditions from light-duty diesel vehicles in Chinese cities

A total of 15 light-duty diesel vehicles(LDDVs) were tested with the goal of understanding the emission factors of real-world vehicles by conducting on-board emission measurements. The emission characteristics of hydrocarbons(HC) and nitrogen oxides(NOx) at different speeds, chemical species profiles and ozone formation potential(OFP) of volatile organic compounds(VOCs) emitted from diesel vehicles with different emission standards were analyzed. The results demonstrated that emission reductions of HC and NOxhad been achieved as the control technology became more rigorous from Stage I to Stage IV. It was also found that the HC and NOxemissions and percentage of O2 dropped with the increase of speed, while the percentage of CO2 increased. The abundance of alkanes was significantly higher in diesel vehicle emissions, approximately accounting for 41.1%–45.2%, followed by aromatics and alkenes. The most abundant species were propene,ethane, n-decane, n-undecane, and n-dodecane. The maximum incremental reactivity(MIR)method was adopted to evaluate the contributions of individual VOCs to OFP. The results indicated that the largest contributors to O3 production were alkenes and aromatics, which accounted for 87.7%–91.5%. Propene, ethene, 1,2,4-trimethylbenzene, 1-butene, and1,2,3-trimethylbenzene were the top five VOC species based on their OFP, and accounted for 54.0%-64.8% of the total OFP. The threshold dilution factor was applied to analyze the possibility of VOC stench pollution. The majority of stench components emitted from vehicle exhaust were aromatics, especially p-diethylbenzene, propylbenzene, m-ethyltoluene, and p-ethyltoluene.     

Soil effects of six different two-species litter mixtures that include Ulmus pumila

The tree species that contribute to decomposed leaf litter can have important effects on soil properties and thus nutrient cycling and interactions between tree species. We examined ground leaf litter and soil mixtures consisting of leaves from Ulmus pumila (Up) combined individually with leaves from one of six other species: Betula platyphylla (Bp), Quercus liaotungensis (Ql), Salix matsudana (Sm), Hippophae rhamnoides (Hr), Caragana microphylla (Cm), and Amorpha fruticosa (Af). The soil–litter mixtures were incubated for 120 days to analyse the effects of their decomposition on soil properties and to determine the interactions between the different types of litter within each mixture. The decomposed litter mixtures were composed of Up combined with Sm- or Hr-improved soil fertility relative to the pure Up mixture, but the decomposed litter mixtures were composed of Up combined with Cm-, Af-, or Ql-diminished soil properties. Three leaf mixture treatments, namely Up?×?Bp, Up?×?Sm, and Up?×?Hr, exhibited synergistic effects on soil properties (i.e. soil properties exceeding the predicted values); however, three other treatments, namely Up?×?Ql, Up?×?Cm, and Up?×?Af, exhibited antagonistic effects (i.e. properties below the predicted values). Therefore, litter from Bp, Sm, or Hr should be mixed with Up to improve soil fertility and production in plantations.     

烃类沸点的定量构效关系研究

应用CODESSA软件计算296种烃类物质的分子结构描述符,分别用启发式回归（HM）和最佳多元线性回归（B-MLR）筛选计算出的所有分子描述符,并建立沸点的线性回归模型。用B-MLR方法筛选出的4个描述符作为支持向量机（SVM）的输入建立了非线性模型。预测结果表明：所建立的模型稳健,泛化能力强,预测误差小。非线性模型（R2=0.9905,RMSE=10.2295）的性能优于线性回归模型（HM：R2=0.9819,RMSE=14.0606;B-MLR：R2=0.9842,RMSE=13.1058）,预测效果令人满意。     

Theoretical evaluation of lower explosion limit of hybrid mixtures

Lower explosion limits of hybrid fuel mixtures are usually determined through time consuming and expensive experiments. Although, mathematical expressions like Le-Chatelier's Law and Bartknecht curve have been used by many researchers to predict the LEL of hybrid mixtures, significant deviations remain unexplained. This research work, presents a more sophisticated and general approach for the determination of LEL of hybrid mixtures.Assuming that the combustion kinetics of pure species are independent and unchanged by the presence of other combustible species, complete conversion of the reactants and no heat losses, a simple mathematical model has been derived from the enthalpy balance of the whole system. For the experimental validation of the modelled values, modified version of 20L sphere has been employed, following the European standard (EN 14034-3: 2011) as experimental protocol. Hybrid mixtures of three dusts with two gases were selected for the scope of this publication. By analyzing the modelled as well as the experimental values, it can be concluded that the LEL values of the individual components in the hybrid mixture set the upper and lower limit for the LEL of the hybrid mixture provided the total amount of fuel in the system is considered as the concentration of the hybrid mixture. Moreover, the amount of dust or gas required to render the hybrid mixture flammable mainly depends on the energy contribution upon combustion of the individual species to raise the temperature of the whole system from ambient to the flame temperature.Le-Chatelier's Law and Bartknecht curve are empirical relations, which might hold true for a first-order approximation of LEL of hybrid mixtures, but do not represent the most conservative values of LEL reported in literature. This implies that there is a non-zero probability of occurrence of an explosible mixture in the non-explosible concentrations ranges defined by these relations. Considering these arguments, the authors suggest to employ the model presented in this paper – which presents reasonably conservative values of LEL of hybrid mixtures – for theoretical calculation of LEL of hybrid mixtures, when no precise experimental data is available.     

Combining product engineering and inherent safety to improve the powder impregnation process

The functionalization of nonwoven textiles can be realized by dry powder impregnation. In order to develop and improve this process, two complementary approaches have been combined: product engineering and inherent safety. It consists in integrating ab-initio consumers' requirements, production constraints as well as safety and environmental considerations. This case study is focused on the proposal, the characterization and the selection of powders mixtures of flame retardants and copolyesters, which will be used to create fire-proofed textiles. The influences of the chemical natures of the flame retardant (e.g. calcium carbonate, aluminium trihydroxide, ammonium polyphosphates), their respective concentrations, particle diameters and the addition of silica to flame retardant/polymer mixtures on their minimum ignition energy has been investigated. It has been determined that ammonium polyphosphates are far more efficient than other flame-retardants and that a minimum of 20%wt. concentration is needed to generate a powder mixture that will be almost insensitive to ignition by an electrostatic source. Modifying the particle size distribution and introducing glidants play also a significant role on flame retardant/polymer interactions, on powder dispersibility and has a strong impact on the minimum ignition energy. Finally, the formulations which have been selected fulfill the requirements for fire resistance, flowability, prevention of dust explosion; they are non-toxic, environmentally friendly and their cost is reduced.     

Fume emissions during gas metal arc welding

The control of exposure to welding fumes is of increasing importance in promoting a healthy, safe and productive work environment. This article describes the effects of shielding gas composition on the amount and composition of welding fumes produced during gas metal arc welding (GMAW). The amount of fumes generated during welding was measured for steady current over a range of wire-feed speeds and arc voltages using the standard procedures contained in ANSI/AWS F1.2 [American Welding Society. ANSI/AWS F1.2. Laboratory method for measuring fume generation rates and total fume emission of welding and allied processes. Miami, Florida; 1992]. Results of these measurements show that the fume formation rates (FFRs) increase with CO₂ and O₂ in the shielding gas mixture. The lowest FFRs were obtained with the mixtures of Ar?+?2%CO₂ and Ar?+?3%CO₂?+?1%O₂. The highest FFRs were obtained with the mixtures of Ar?+?18%CO₂ and Ar?+?5%CO₂?+?4%O₂. The welding fumes contains mainly iron, manganese, silicon, titanium and sodium under oxide forms. The fume cluster particles have dimensions between 0.5 and 2?µm. The FFR was found to be governed by the transfer modes of molten metal, i.e. the current intensity and arc voltage, as well as by the shielding gas mixtures composition. Thus these parameters have to be taken into consideration before designing a welding process. Whenever possible, users of GMAW should use the lowest current intensity. However, when this is not possible, due to the constraints of process productivity, welders should use higher currents, but with Ar?+?2%CO₂ and Ar?+?3%CO₂?+?1%O₂ shielding mixtures, which will lead to smaller fume emissions.     

Combined effects of 2,3,7,8-tetrachlorodibenzo- p -dioxin and polychlorinated biphenyl congeners in rats

The objective of this work was to evaluate potential interactions between 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) and polychlorinated biphenyls congeners (PCBs) in rats. Groups of five adult female rats were given 0, 2.5, 25, 250, or 1000?ng TCDD/kg body weight/day or TCDD in combination with a mixture of PCB congeners at a concentration of 2 or 20?µg?kg^?1 body weight/day by gavage for 28 days. After the 28-day treatment period, the rats were killed for the analysis of biochemical, liver enzyme activities, and hematological and pathological end points. Growth suppression, increased absolute and relative liver weights, and decreased thymic weight were observed in the 1000?ng TCDD group alone, or the groups receiving a mixture of 1000?ng TCDD and 2 and 20?µg PCBs. TCDD-increased liver and thymic weights were not altered by PCBs; however, growth suppression was more pronounced in animals receiving 1000?ng TCDD and 2?µg PCBs. Increased hepatic microsomal methoxy resorufin-O-demethylase and ethoxy resorufin-O-deethylase activities occurred in 250 and 1000?ng?kg^?1 TCDD-treated animals, which were antagonized by PCBs. Effects of 250?ng TCDD on serum cholesterol and liver uridine diphosphate glucuronosyl transferase activity were reduced by 20?µg PCBs. Treatment with 1000?ng TCDD increased serum albumin, decreased liver vitamin A, increased kidney vitamin A, and liver microsomal glutathione-S-transferase activity, which were not affected by PCBs. Decreased hemoglobin, platelet, packet cell volume, and red cell indices were observed in TCDD-treated rats, but no interactive effects were seen. Histopathological evaluation revealed that liver, thyroid, and thymus were the target organs, but the effects of co-exposure to PCBs and TCDD were variable. These results indicate that the mixture effects of PCBs and TCDD may be additive, synergistic, or antagonistic depending on the dose level and end points measured.     

A new method for the prediction of flash points for ternary miscible mixtures

The flash point is one of the most important physicochemical parameters used to characterize the fire and explosion hazard for flammable liquids. The flash points of ternary miscible mixtures with different components and compositions were measured in this study. Four model input parameters, being normal boiling point, the standard enthalpy of vaporization, the average number of carbon atoms and the stoichiometric concentration of the gas phase for mixtures, were employed and calculated based on the theory of vapor–liquid equilibrium. Both multiple linear regression (MLR) and multiple nonlinear regression (MNR) methods were applied to develop prediction models for the flash points of ternary miscible mixtures. The developed predictive models were validated using data measured experimentally as well as taking data on flash points of ternairy mixtures from the literature. Results showed that the obtained average absolute error of both the MLR and the MNR model for all the datasets were within the range of experimental error of flash point measurements. It is shown that the presented models can be effectively used to predict the flash points of ternary mixtures with only some common physicochemical parameters.