多点激励下连续桥梁地震响应特性研究

地震动在强度和频率等方面均具有非平稳特性,导致多跨桥梁的动力响应非常复杂.为了研究多跨连续桥梁在多点地震动激励下的反应,首先提出了评价多点地震动非平稳性的3个指标:幅值绝对值的标准差、方向离散度和穿零率.根据桥梁多点激励运动方程的特点,阐述了广义振型参与系数矩阵的意义,及其与传统振型参与系数矩阵的联系和区别.根据多点地...     

蚊香和佛香燃烧过程中苯系物的排放研究

利用小型烟雾箱对6种市售蚊香和5种佛香燃烧过程进行采样研究,定量分析释放的5种苯系物(苯、甲苯、乙苯、对/间二甲苯、邻二甲苯),利用单室质量平衡模型分别计算排放系数.结果表明,蚊香和佛香的不同品牌之间苯系物的排放系数相差较大,蚊香中5种苯系物的平均排放因子分别是77,101,94,250,94μg/g,佛香中5种苯系物的平均排放因子依次是732,598,2084,2349,221μg/g.蚊香与佛香燃烧释放物中含量最高的苯系物均是间/对二甲苯,分别占总含量的41%、39%.取测得的最大排放速率,采用室内空气质量模型模拟一般条件下蚊香和佛香燃烧释放苯系物对室内空气的影响,分析结果显示,燃烧蚊香造成室内苯、甲苯和乙苯的最大模拟浓度分别是31,45,86μg/m3,燃烧佛香造成室内苯、甲苯和乙苯的最大模拟浓度为65,66,187μg/m3.     

Measurement of watershed phosphorus: A review

Eutrophication control programs are based on phosphorus management which, in turn, requires a detailed quantification of the watershed phosphorus budget. This involves an assessment of non‐point sources of phosphorus, a key element of which is determining the fraction of soil‐P and sediment‐P available to support algal growth. This paper presents a review of the state‐of‐the‐art of estimating algal available‐P from non‐point sources, and an analysis of pertinent data. The need to employ multi‐interval algal bioassays in developing phosphorus management systems is stressed.     

The Brown Trout Population at Loch Fleet Eight Years After Liming

Abstract

At the start of the Loch Fleet Project in 1984, the Loch and the upper 7 km of its efferent stream were found to be devoid of trout (Salmo trutta) as a result of acidification. Following the liming treatments applied to the catchment, from 1986 the formerly toxic water quality conditions (pH ～ 4.5, calcium ～ 1 mgl^?1, elevated aluminium and heavy metal levels) were eliminated, and trout were reintroduced on two occasions, in 1987 and 1988. A total of 520 fish were stocked, at a combined density equivalent to 5.5 kg ha^?1. Surveys of the loch and stream populations were carried out annually until 1993 to monitor their development, using a range of techniques, including electrofishing, gill-netting, seine-netting, spawner trapping and mark-release recapture methods. Length and scale- analysis were used to investigate fish growth.

The trout population in Loch Fleet expanded rapidly as a result of natural spawning in the loch's main feeder stream, augmented by the use of an artificial spawning bed which was constructed at the loch outlet in 1990. in mid-1983 the stock density, estimated by mark-recapture census methods, had increased to 24.9 kg ha^?1. Poor recruitment in the years 1991–93, however, reduced the rate of expansion and resulted in a population comprising mainly older individuals. the poor recruitment in these years was not fully explained but was not caused by water quality and was most likely a result of fry washout by spring spates.

Fish growth rates were high initially and were estimated on the basis of the Elliott trout growth model to be optimal for the prevailing water temperature regime of the loch. By 1991, growth rates had fallen, probably as a result of competition for food, but showed signs of recovery towards the end of the study period in 1993, following the period of lower population densities of young fish.

Trout rapidly repopulated the loch's outlet stream after 1987 but have remained sparse and have shown no signs of spawning within most of the stream. Water analyses have shown that the liming of the Loch Fleet catchment has minimal impact on downstream waters when flows are high, so that potentially toxic acid episodes have not been prevented.     

Different proxies for the reactivity of aquatic sediments towards oxygen: A model assessment

Information on benthic carbon mineralization rates is often derived from the analysis of oxygen microprofiles in sediments. To enable a direct comparison of different sediment environments, it is often desirable to characterize sediments by a single proxy that expresses their “reactivity” towards oxygen. For this, there are three commonly used proxies: the oxygen penetration depth (OPD), the oxygen flux at the sediment-water interface (DOU), and the maximum volumetric oxygen consumption rate (R_max). The OPD can be directly determined from the oxygen depth profile, while the DOU is usually obtained by a linear fit to the oxygen gradient either in diffusive boundary layer. The oxygen consumption rate R_max requires the fitting of a reactive-transport model to the data profile. This article shows that the OPD alone is a suboptimal proxy, because it shows a strong dependence on the half-saturation constant K_s, and secondly, because it is sensitive to the particular re-oxidation conditions right above the oxic-anoxic interface. Similarly, the volumetric oxygen consumption rate R_max is rather strongly dependent on the kinetic model formulation employed. To show this we fitted three different (Bouldin, Blackman and Monod) kinetics to the same oxygen data profiles. When fitting these models, the R_max values obtained differed by 20% for exactly the same oxygen profile. Accordingly, if one reports R_max values, it is crucial to specify the kinetic model alongside. Overall, DOU emerges as sediment reactivity proxy which is the least model dependent.     

冬季条件下曝气生物滤池处理模拟灰水的应用研究

文章采用陶粒滤料为载体,研究了在冬季低温条件下化学混凝-曝气生物滤池工艺对模拟灰水的中试研究。实验结果表明,在冬季水温为3℃-15℃的条件下,初沉处理大大减轻了后续曝气生物滤池的运行负荷的同时也提高了整个工艺的搞冲击能力。当曝气生物滤池水力负荷为3．8m／h时,COD、LAS的去除效率分别在70％、80％以上。NH4-N去除效率受LAS、COD、温度影响较大,整个工况去除效率在15％～75％。NH4-N的去除效率随着COD负荷的增加,其去除效率受到严重的影响。COD的去除负荷率为2．85kg／（m^3滤料·d）升高到5．04kg／（m^3滤料·d）时,NH4-N的去除率则由61％-77％,下降到26％～41％,说明了异养微生物的生长严重抑制了硝化亚硝化细菌的生长。     

Experimental analysis of thermal performance of evacuated tube and flat-plate solar air collectors at different air flow rates

The thermal performances of an evacuated tube collector (ETC) and flat-plate solar air collector (FPC) are experimentally investigated at different air flow rates. To investigate the performance of the ETC and FPC, experimental set-ups were fabricated. Air was used as a working fluid and tested at the same climatic conditions. The ETC had 15 evacuated tubes with a surface area of 1.66 m². The experimental set-up consisted of a header with a hollow pipe (square pipe) in the centre through which the air flowed. The flat-plate collector had a surface area of 1.35 m². The FPC had a black painted absorber sheet which divides the collector into two sections. The air flowed through the upper and the lower sections parallel to the collector to minimize the overall heat loss. The temperature of the outlet air depends on several factors along with the airflow rate and the intensity of the solar radiation. It was found that during the day at high flow rates, the efficiency of the ETC varies from 0.12 to 0.5, and for the flat plate it was from 0.29 to 0.68. The maximum temperature of the air was 56.7°C for the ETC and 25.7°C for the FPC.     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

Is The Ca + K + Mg/Al Ratio in the Soil Solution a Predictive Tool for Estimating Forest Damage?

The ratio between (Ca +K +Mg) and Al in nutrientsolution has been suggested as a predictive tool forestimating tree growth disturbance. However, the ratiois unspecific in the sense that it is based on severalelements which are all essential for plant growth;each of these may be growth-limiting. Furthermore,aluminium retards growth at higher concentrations. Itis therefore difficult to give causal and objectivebiological explanations for possible growthdisturbances. The importance of the proportion ofbase-cations to N, at a fixed base-cation/Al ratio, isevaluated with regard to growth of Picea abies.The uptake of elements was found to be selective;nutrients were taken up while most Al remained insolution. Biomass partitioning to the roots increasedafter aluminium addition with low proportions of basecations to nitrogen. We conclude that the low growthrates depend on nutrient limitation in thesetreatments. Low growth rates in the high proportionexperiments may be explained by high internal Alconcentrations. The results strongly suggest thatgrowth rate is not correlated with the ratio in therooting medium and question the validity of usingratios as predictive tools for estimating forestdamage. We suggest that growth limitation of Picea abies in the field may depend on lowproportions of base cations to nitrate. It istherefore important to know the nutritional status ofthe plant material in relation to the growth potentialand environmental limitation to be able to predict andestimate forest damage.     

Accounting for rate instability and spatial patterns in the boundary analysis of cancer mortality maps

Boundary analysis of cancer maps may highlight areas where causative exposures change through geographic space, the presence of local populations with distinct cancer incidences, or the impact of different cancer control methods. Too often, such analysis ignores the spatial pattern of incidence or mortality rates and overlooks the fact that rates computed from sparsely populated geographic entities can be very unreliable. This paper proposes a new methodology that accounts for the uncertainty and spatial correlation of rate data in the detection of significant edges between adjacent entities or polygons. Poisson kriging is first used to estimate the risk value and the associated standard error within each polygon, accounting for the population size and the risk semivariogram computed from raw rates. The boundary statistic is then defined as half the absolute difference between kriged risks. Its reference distribution, under the null hypothesis of no boundary, is derived through the generation of multiple realizations of the spatial distribution of cancer risk values. This paper presents three types of neutral models generated using methods of increasing complexity: the common random shuffle of estimated risk values, a spatial re-ordering of these risks, or p-field simulation that accounts for the population size within each polygon. The approach is illustrated using age-adjusted pancreatic cancer mortality rates for white females in 295 US counties of the Northeast (1970–1994). Simulation studies demonstrate that Poisson kriging yields more accurate estimates of the cancer risk and how its value changes between polygons (i.e., boundary statistic), relatively to the use of raw rates or local empirical Bayes smoother. When used in conjunction with spatial neutral models generated by p-field simulation, the boundary analysis based on Poisson kriging estimates minimizes the proportion of type I errors (i.e., edges wrongly declared significant) while the frequency of these errors is predicted well by the p-value of the statistical test.