基于Matlab分析的台阶式场地平整方案优化设计

在某市餐厨垃圾处理厂场地平整设计中,利用Matlab软件对台阶式场地平整方案进行优化设计,即在Auto CAD环境下用等高线法计算各级台阶的土方量,用Matlab软件拟合出台阶设计高程和土方量的函数关系式,在约束条件下求解,得到了最优设计高程和基于土方挖填平衡条件下场地平整的最小土方工程量,为工程总平面布置提供优化方案。其分析设计方法可为工业企业台阶式场地的总平面布置设计提供借鉴。     

下凹式绿地在降雨径流控制中的应用研究

下凹式绿地具有蓄渗雨水、削减洪峰流量、净化雨水、防止土壤侵蚀等优点,且投资少,是一种能同时满足环境、生态、经济等多重效应的新型雨水利用措施;它的应用将有效缓解城市水资源匮乏和降雨地表径流造成的面源污染,同时能在一定程度上防止城市内涝.在介绍下凹式绿地对降雨径流控制的基础上,着重综述了下凹式绿地对雨水的蓄渗、净化作用及其设计方面的研究进展.     

Sampling and Mapping a Soil Erosion Cover Factor by Integrating Stratification,Model Updating and Cokriging with Images

Cost-efficient sample designs for collection of ground data and accurate mapping of variables are required to monitor natural resources and environmental and ecological systems. In this study, a sample design and mapping method was developed by integrating stratification, model updating, and cokriging with Landsat Thematic Mapper (TM) imagery. This method is based on the spatial autocorrelation of variables and the spatial cross-correlation among them. It can lead to sample designs with variable grid spacing, where sampling distances between plots vary depending on spatial variability of the variables from location to location. This has potential cost-efficiencies in terms of sample design and mapping. This method is also applicable for mapping in the case in which no ground data can be collected in some parts of a study area because of the high cost. The method was validated in a case study in which a ground and vegetation cover factor was sampled and mapped for monitoring soil erosion. The results showed that when the sample obtained with three strata using the developed method was used for sampling and mapping the cover factor, the sampling cost was greatly decreased, although the error of the map was slightly increased compared to that without stratification; that is, the sample cost-efficiency quantified by the product of cost and error was greatly increased. The increase of cost-efficiency was more obvious when the cover factor values of the plots within the no-significant-change stratum were updated by a model developed using the previous observations instead of remeasuring them in the field.     

高炉出铁场除尘方案研究

某钢铁企业高炉炼铁车间的出铁场在生产过程中产生大量高浓度的烟尘,对厂区的大气环境及周边的环境造成严重污染,同时直接危害了职工的身体健康。通过对整个出铁场除尘工艺系统及通风状况的分析及实际应用情况,总结出了适合该场合的系统除尘方案。     

西藏环境信息化基础建设设计实践

描述了西藏环保厅“西藏自治区环境保护厅环境信息化能力建设项目”前期调研、设计的过程,总结在西藏信息化发展基础差、技术人才少、资金投入紧张、稳定性要求高、信息技术发展迅速等现实情况下基础信息化项目建设前期设计特点,为西藏或其他欠发达地区信息化基础建设项目设计提供参考。     

基于任务成功率的装备综合保障工作体系及协同设计环境研究

本文介绍了基于任务成功率的装备综合保障工作体系框架,提出了可靠性、维修性、测试性、保障性、安全性协同设计环境要求,从而为进行可靠性、维修性、测试性、保障性、安全性综合优化设计奠定基础。     

SCR脱硝装置中整流格栅的优化设计

基于CFD模拟软件对某选择性催化还原(SCR)脱硝装置进行数值模拟,分析了不同整流格栅间距、形式对反应器上部流场的影响。以不同高度截面的烟气速度变异系数CV和最大烟气入射角为定量评价指标,给出了满足性能要求的整流格栅设计参数范围以及最优设计方案。     

民机非包容性转子失效危害防护设计研究

民用飞机的发动机转子非包容性失效给飞机的安全运行带来巨大的风险,为了将这种转子非包容性失效可能带来的危害降至最小,需要合理的评估碎片的危害水平,以及采取合理的安全预防措施。尽管在FAA(Federal Aviation Administration)用于评估碎片危害水平的UEDDAM(Uncontained Engine Debris Damage Analysis Model)软件工具中采用了加强防护设计以减少碎片危害,但是没有对具体的分析流程和碎片能量衰减的计算模型进行说明。为此,在现有的碎片危害分析方法的基础上,考虑到碎片在侵彻过程中会有能量衰减,分析了降低碎片危害的三种安全预防措施,通过对比确定了加强防护设计对于降低碎片危害的重要意义及其分析的流程。通过对飞机结构中关键区域定义的理解,明确了在飞机的不同部位需要采取不同的加强防护设计,并详细介绍了整体加强防护设计和局部加强防护设计的流程。     

Users' views of hospital environmental quality: Validation of the Perceived Hospital Environment Quality Indicators (PHEQIs)

Environmental Quality Perception (EQP) is an important construct used to help to understand the relationship between people and the hospital environment. From a patient-centered care perspective, it is important that hospital design take into account the patients' (and other users') point of view. This paper presents the adaptation and validation of a measure of hospital EQP, the Perceived Hospital Environment Quality Indicators (PHEQIs; Fornara, Bonaiuto, & Bonnes, 2006), and seeks to confirm the factor structure of this construct in a different cultural context. Three scales, two focusing on physical environments and one evaluating the social environment, were completed by 562 users of four orthopedic units in Portuguese hospitals, two older and two recently built or renovated. To assess criterion validity, hospital physical environments were also objectively evaluated by two architects. Using a confirmatory factor analysis the three validation procedures produced acceptable fit indices in the final measurement models. Overall reliability values were satisfactory, as was the evidence for criterion validity. PHEQIs scales and factors correlated with global evaluation of the environment, supporting concurrent criterion validity; and predictive criterion validity was demonstrated given that users of older and newer hospitals differed significantly on the perception of quality of hospital EQP, and that high congruence between users' and experts' evaluations was found. Discriminant construct validity was supported, and some difficulties in showing convergent validity are discussed in terms of item formulation adequacy. Implications for research and practice are described.     

Comparison of a two-stage sampling design and its composite sample alternative: An application to soil studies

The objective of a long-term soil survey is to determine the mean concentrations of several chemical parameters for the pre-defined soil layers and to compare them with the corresponding values in the past. A two-stage random sampling procedure is used to achieve this goal. In the first step, n subplots are selected from N subplots by simple random sampling without replacement; in the second step, m sampling sites are chosen within each of the n selected subplots. Thus n · m soil samples are collected for each soil layer. The idea of the composite sample design comes from the challenge of reducing very expensive laboratory analyses: m laboratory samples from one subplot and one soil layer are physically mixed to form a composite sample. From each of the n selected subplots, one composite sample per soil layer is analyzed in the laboratory, thus n per soil layer in total. In this paper we show that the cost is reduced by the factor m — 1 when instead of the two-stage sampling its composite sample alternative is used; however, the variance of the composite sample mean is increased. In the case of positive intraclass correlation the increase is less than 12.5%; in the case of negative intraclass correlation the increase depends on the properties of the variable as well. For the univariate case we derive the optimal number of subplots and sampling sites. A case study is discussed at the end.