Ergonomic Aspects of a Virtual Environment

A virtual environment is an interactive graphic system mediated through computer technology that allows a certain level of reality or a sense of presence to access virtual information. To create reality in a virtual environment, ergonomics issues are explored in this paper, aiming to develop the design of presentation formats with related information, that is possible to attain and to maintain user-friendly application.     

玻璃熔窑SCR烟气脱硝设计的影响因素分析

对影响玻璃熔窑SCR烟气脱硝设计的几个主要因素,如烟气条件（烟气量和NOx初始浓度）、还原剂、催化剂、SCR反应器布置方式及催化剂吹灰方式等进行了分析与讨论,指出在对玻璃熔窑进行SCR烟气脱硝设计时应根据燃料情况、烟气条件、生产工艺、环保法规及污染物减排要求等合理进行选择,以确保玻璃熔窑SCR烟气脱硝系统安全运行及工程投资、运行费用的经济合理性。     

Using Ecological Footprints as a Policy Driver: The Case of Sustainable Construction Planning Policy in London

Abstract

The forests of Nepal, which in the past were at least nominally under the direct control of the state, are today increasingly entrusted to local people in the name of community forestry (CF). CF is considered a successful endeavour in managing forest resources, conserving biodiversity and supplying people with basic economic needs. In order to assess to what extent the two goals of biodiversity conservation and meeting economic needs of people have been integrated through CF, four community forestry user groups (CFUGs) were studied in the Mid-hills ecological zone. Based on a participatory survey and a critical review of the statutes and operational plans of these CFUGs, it was found that integration of biodiversity conservation was still insufficient, and that improvements in the policy and management regimes of CF are necessary to achieve a balance between biodiversity conservation and economic use of the forest resources.     

汽车禁用物质控制方法研究与应用

本文分析了汽车禁用有害物质现状及相关法规和政策要求,探索汽车产品禁限用有害物控制方法,建立汽车产品绿色材料数据系统。企业通过实践,有效控制汽车产品禁限用有害物质的使用。     

Control Issues in the Design of a Gas Turbine Cycle for CO2 Capture

This article is concerned with control issues related to the design of a semi-closed O ₂/CO ₂ gas turbine cycle for CO ₂ capture. Some control strategies and their interaction with the process design are discussed. One control structure is implemented on a dynamic simulation model using a predictive controller, and simulations assess the performance and compare its merits with a conventional PI structure. The results indicate that it can be advantageous for operability to allow a varying (as opposed to fixed) compressor inlet pressure, at the cost of a more expensive design. Furthermore, the results show that a predictive controller has some advantages with respect to the simpler conventional PI control structure, in particular in terms of constraint handling.     

烟气脱硫剂制浆系统一体化设计及应用

石灰石粉制浆系统是石灰石-石膏湿法烟气脱硫工艺中脱硫剂浆液干式制备系统的一个主要部分。针对石灰石粉制浆系统传统设计的不足,提出了石灰石浆液罐与粉仓一体化设计的优化方案,具有节省投资、占地小、设计简单紧凑、系统可靠和寿命长的优点,尤其适合我国老小燃煤机组烟气脱硫改造工程。目前已成功应用于多个烟气脱硫工程。     

模糊控制在湿法脱硫烟气系统中的应用

介绍了石灰石-石膏湿法脱硫装置烟气系统的设计情况,重点讲述了增压风机动叶的控制,针对增压风机动叶系统时滞、非线性等特点,常规PID控制效果并不理想,设计出模糊控制器,仿真后证明了理论的正确性。     

高锰酸盐指数测定的影响因素研究

采用正交实验设计法L9(34)考察高锰酸盐指数测定的影响因素,确定各因素的主次关系及最佳测定条件。结果表明,高锰酸钾浓度对高锰酸盐指数测定的影响程度最大,其次是加热时间及滴定时间,影响较小的是溶液的酸度。在最佳测定条件下:1+3硫酸、加热8min、60s内滴定、高锰酸钾浓度为0.0100mol/L,加标回收率为101%。     

国外轻型车辆防翻架的设计与制作

根据在海外钻井工程服务项目HSE管理中积累的经验,介绍了国外防翻架的安全标准及其设计、选材、制作和安装要求,为中国油田服务承包商进行轻型车辆防翻架制作提供了参考。     

Multiobjective optimisation method for life-cycle design of mechanical products

Manufacturing that minimises the exhaustion of natural resources, energy used and deleterious environmental impact is increasingly demanded by societies that seek to protect global environments as much as possible. To achieve this, life-cycle design (LCD) is an essential component of product design scenarios; however, LCD approaches have not been well integrated in optimal design methods that support quantitative decision-making. This study presents a method that yields quantitative solutions through optimisation analysis of a basic product design incorporating life-cycle considerations. We consider two types of optimisation approaches that have different aims, namely, (1) to reduce the use of raw materials and energy consumption and (2) to facilitate the reuse of the product or its parts when it reaches the end of its useful life. We also focus on how the optimisation results differ according to the approach used, from the viewpoint of the 3R concept (Reduce, Reuse and Recycling). Our method obtains optimum solutions by evaluating objectives fitted to each of these two optimisation approaches with respect to the product's life-cycle stages, which are manufacturing, use, maintenance, disposal, reuse and recycling. As an applied example, a simple linear robot model is presented, and Pareto optimum solutions are obtained for the multiobjective optimisation problem whose evaluated objectives are the operating accuracy of the robot and the different life-cycle costs for the two approaches. The characteristics of the evaluated objectives and design variables, as well as the effects of using material characteristics as design parameters, are also examined.