A biofilter model for simultaneous simulation of toluene removal and bed pressure drop under varied inlet loadings

In this study, a biofiltration model including the effect of biomass accumulation and inert biomass growth is developed to simultaneously predict the Volatile Organic Compounds (VOCs) removal and filter bed pressure drop under varied inlet loadings. A laboratory-scale experimental biofilter for gaseous toluene removal was set up and operated for 100 days with inlet toluene concentration ranging from 250 to 2500 mg?m^-3. According to sensitivity analysis based on the model, the VOCs removal efficiency of the biofilter is more sensitive to Henry’s constant, the specific surface area of the filter bed and the thickness of water layer, while the filter bed pressure drop is more sensitive to biomass yield coefficient and original void fraction. The calculated toluene removal efficiency and bed pressure drop satisfactorily fit the experimental data under varied inlet toluene loadings, which indicates the model in this study can be used to predict VOCs removal and bed pressure drop simultaneously. Based on the model, the effect of mass-transfer parameters on VOCs removal and the stable-run time of a biofilter are analyzed. The results demonstrate that the model can function as a good tool to evaluate the effect of biomass accumulation and optimize the design and operation of biofilters.     

膜-生物反应器中活性污泥沉降性能与膜污染相关性研究

结合连续流小试，对膜．生物反应器运行过程中，活性污泥沉降性能的变化及其对膜污染的影响进行了研究．结果表明，随着运行时间的增长，该系统内丝状菌大量繁殖，活性污泥沉降性能变差，SVI值升高．随之，膜过滤压差(过滤阻力)平均上升速率有所增加，膜过滤周期缩短．膜过滤压差的“两阶段性(平缓上升期和加速上升期)”变化规律趋于明显，平缓上升期和加速上升期的膜过滤压差上升速率随污泥SVI值的升高分别呈现下降和上升的趋势．污泥沉降性能的变化对膜污染过程产生明显影响．电镜观察表明，污泥沉降性能对膜过滤压差的影响与膜面污染层的结构和厚度有关．     

高压电化学絮凝技术去除酿酒废水中总磷的研究

为了使酿酒废水中总磷有效去除并达标排放,通过对酿酒废水总磷的排放情况调查,有针对性的选用高压电化学絮凝技术,对酿酒废水中总磷的去除效果进行实验研究。从实验结果看,调节进水pH值为2.3、停留时间45分钟时总磷去除率可达到99%以上,在该条件下COD的去除率也能达到50%左右,废水总磷排放浓度能够达到1.0mg/L的排放要求。     

关于安全阀整定压力判定方法的讨论

安全阀整定压力是安全阀重要的技术指标之一。国内安全阀检验机构主要通过压力曲线拐点法或听声音法判定安全阀整定压力,国内外型式试验机构通过开高位移判定安全阀整定压力。通过比对试验发现：压力曲线拐点法或听声音法容易受到安全阀结构形式、是否有前泄及安全阀校验台试验容器和储气罐容积不能满足法规要求等因素影响检验的准确性;开高位移判定更为客观、准确。     

Pressure Sensitive Mats as Safety Devices in Danger Zones

Developing prototypes of pressure sensitive mats and testing their practical application were the aims of this study. Two contact plate mats were designed and constructed: rubber-rubber (R) and metal-metal (M). A recipe for rubber mixes and the production technology were prepared. Two laboratory test stands for measuring the actuating force, response time, static pressure resistance, and the durability of the mats were constructed. Computer software was written to control the operation of those test stands. Methods of testing pressure sensitive mats were based on PrDIN 31 006 (Deutsches Institut fur Normung [DIN], 1990) and EN 1760–1 (Comite Europeen de Normalisation [CEN], 1997). Both prototypes of contact plate mats were tested under laboratory and industrial conditions.

The test results proved that the design was correct, the setup requirements were fulfilled, and the mats were efficient and reliable in the industrial environment.     

低压环境对锂电池热失控释放温度影响

为研究锂电池在民航飞行低压特殊环境的安全性及发生热失控灾害后的高温危险性,通过可模拟飞行变动条件的动压变温实验舱开展系列实验,研究锂电池在不同低压环境下的（101,60,30 kPa）多节18650型锂离子电池热失控温度特性,采集电池池体温度及热失控喷射释放温度等参数。研究结果表明:随环境压力降低,圆柱锂电池间的热失控传播并不能被阻断,但锂电池热失控灾害所释放产生的高温区域减少,且高温持续时间变短,释放所产生温度的高温危险性随环境压力的降低而有所降低。     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

污泥压滤脱水条件的优化研究

采用压滤试验,研究了强压条件下剩余污泥的脱水性能及影响因素,确定了污泥压滤脱水的最佳操作条件。结果表明,随着压力的增加、压滤时间的延长和絮凝剂聚丙烯酰胺(PAM)投加量的增加,所得净滤液量均明显增大。综合考虑脱水效果和经济因素,最佳压滤脱水的条件为:压力0.6MPa,压滤时间30min,聚丙烯酰胺的投加量2.5kg/t干泥。     

连续流培养好氧颗粒污泥研究进展

好氧颗粒污泥(AGS)因其沉降性能好,生物量高,抗冲击能力强等优点而受到青睐.相比于传统的序批式反应器(SBR),连续流AGS技术具有易于操作控制以及匹配实际污水厂的大水量,连续流的优势,因而更具有研究价值和应用潜力.通过文献分析和整理,归纳了连续流AGS技术面临的挑战,总结了连续流培养AGS的研究现状和经验教训,并对...     

确定滤袋室内喇叭安装个数和位置的新方法

初步建立 了滤袋 室内声压 分布 的数 学 模型 ，并 利用 实 测结 果对 此 数学 模型 进 行了 检验 ，证明所建 立的模 型是合理 的。可以 利用此模 型计算 滤袋室内 的声 压分 布，并 确定 喇叭 的安 装个 数和安装位 置