模拟南海大气环境下耐候钢腐蚀性能研究

目的通过室内模拟南海大气环境加速腐蚀试验,对比分析几种钢腐蚀性能优劣,为开发耐南海大气腐蚀用钢提供数据支撑和理论依据。方法分别选用Q235B,Q355和Q500q E三种材料作为研究对象,采用中性盐雾试验方法模拟南海苛刻大气环境对试样进行耐蚀性测试,通过试样表面形貌观察、腐蚀质量损失计算和电化学分析等手段研究其腐蚀行为机制。结果 Q235B表面最先被腐蚀产物完全覆盖,腐蚀速率始终大于另外两种材料。Q355和Q500q E表面膜初期起到延缓腐蚀作用,其中以Q500q E极化阻抗最大,腐蚀表面最为平整。结论模拟南海大气环境下三种试验钢耐蚀性能排序为Q500q EQ355Q235B。     

7A52铝合金等离子弧焊接头盐雾腐蚀行为研究

目的研究7A52装甲铝合金等离子弧焊接接头耐海洋大气环境的腐蚀特征和规律。方法通过盐雾加速腐蚀试验进行腐蚀评估,并在腐蚀后利用扫描电子显微镜(SEM)观察腐蚀产物微观形貌,并分析腐蚀时间对腐蚀性能的影响,通过能谱(EDS)分析腐蚀产物的元素组成。结果 7A52铝合金焊接接头盐雾腐蚀初期(8 h)热影响区首先出现点蚀,随着腐蚀时间延长(12 h),母材和焊缝发生点蚀,热影响区腐蚀产物层氧的含量最多。结论 7A52装甲铝合金等离子弧焊接接头处热影响区是腐蚀敏感区,热影响区比焊缝区和母材区耐蚀性稍差。     

熔盐法制备K+-g-C3N4及其光催化降解有机污染物性能

采用熔盐法制备了能级位置可控的钾离子掺杂石墨相氮化碳催化剂（g-C₃N₄）,并考察了其在可见光下降解罗丹明B（RhB）性能.采用XRD、UV-Vis、XPS、N₂吸附、PL、EIS等手段对催化剂进行了表征.结果表明,钾离子的引入降低了催化剂粒径尺寸,提高了比表面积,改善了光生电子-空穴对的分离效率.不仅如此,通过控制钾离子掺杂量可以实现催化剂的能级位置在一定范围内的任意调变,使有机污染物的氧化降解反应从·O₂^-单一氧化剂反应变成·OH和·O₂^-双氧化剂反应,大大提高了降解率.制备的钾离子掺杂g-C₃N₄的RhB降解速率常数达到0.022min^-1,是纯g-C₃N₄的5倍.不仅如此,通过对能级位置的调控,制备的催化剂对其他多种有机污染物如甲基蓝,苯酚等的降解率也有显著提高.     

Hygroscopic properties of sodium and potassium salts as related to saline mineral dusts and sea salt aerosols

Mineral dust, soil, and sea salt aerosols are among the most abundant primary inorganic aerosols in the atmosphere, and their hygroscopicity affects the hydrological cycle and global climate. We investigated the hygroscopic behaviors of six Na- and K-containing salts commonly found in those primary organic aerosols. Their hygroscopic growths as a function of relative humidity (RH) agree well with thermodynamic model prediction. Temperature dependence of deliquescence RH (DRH) values for five of those salts was also investigated, which are comparable to those in literature within 1%–2% RH, most showing negative dependence on temperature. Hygroscopic growth curves of real-world soil and sea salt samples were also measured. The hygroscopic growths of two more-hydroscopic saline soil samples and of sea salt can be predicted by the thermodynamic model based on the measured water-soluble ionic composition. The substantial amounts of water-soluble ions, including Na⁺ and K⁺, in saline soil samples imply that even nascent saline soil samples are quite hygroscopic at high-RH (>80%) conditions. For three less-hygroscopic dust samples, however, measurements showed higher water uptake ability than that predicted by the thermodynamic model. The small amount of water taken up by less-hygroscopic dust samples suggests that dust particles might contain thin layers of water even to very low RH. The results of this study provide a comprehensive characterization of the hygroscopicity of Na- and K-containing salts as related to their roles in the hygroscopic behaviors of saline mineral dusts and sea salt aerosols.     

高效除砷分子筛新型材料制备及其吸附特性研究

为提高4A分子筛(MS)对水溶液中砷的吸附性能,以MS为载体,采用浸渍法制备载铁分子筛(FMS)和铁锰分子筛(FMMS)作为除砷吸附剂,利用扫描电镜(SEM)、傅里叶红外光谱(FT-IR)、比表面积测试法(BET)等手段对MS和FMS微观结构特点进行表征,并开展批次试验考察FMS和FMMS对水中五价砷(As5+)和三价砷(As3+)的吸附效果,对FMS吸附As5+过程进行吸附动力学、等温吸附试验和吸附热力学等拟合.结果表明:①铁盐浸渍改性能有效提高MS比表面积、改善其表面结构,改性后FMS是一种窄孔径、尺寸均匀的介孔材料,比表面积和孔体积分别从27.38 m2/g和0.068 cm3/g增至281.25 m2/g和0.16 cm3/g,平均孔径由9.93 nm减至2.21 nm;MS微观结构由密实粗糙颗粒转变为疏松多孔隙结构.②FT-IR表明,铁盐浸渍形成的铁氧化物主要与MS结构中O—H、Al—O和Si—O结合;批次试验设定ρ(As5+)为4 mg/L,与MS相比FMS对As5+的去除率约提高70%.③吸附动力学结果显示,FMS对As5+的吸附过程符合准二级动力学模型,相关系数(R2)达0.99,反应过程中化学吸附起主要作用.④等温吸附试验表明,FMS对As5+吸附过程与Freundlich等温吸附模型拟合程度较高,相关系数(R2)达0.98,计算最大吸附容量为9.9 mg/g.⑤热力学参数ΔG、ΔH和ΔS计算表明,温度升高有利于FMS吸附砷,反应过程中FMS表面固体与溶液的混乱度上升.⑥与FMS相比,FMMS对As3+吸附性能有效提高,ρ(As3+/As5+)(As3+与As5+共存条件下溶液质量浓度)分别为2.0、4.0、6.0 mg/L下,FMMS去除率分别约提高26.34%、28.06%和28.09%.研究显示,利用铁盐浸渍法对MS改性可有效提升其对As5+和As3+的吸附容量,发挥材料的实际运用价值.      

EFFECTS OF URBAN LAKES ON QUANTITY AND QUALITY OF BASEFLOW1

ABSTRACT: Man-made lakes have significant impacts on the hydrologic conditions in the watershed in which they are built. This paper examines the nature of the impact upon baseflow by comparing baseflow conditions at the outlet of the lakes with those elsewhere in the watershed. Situated in the upper reaches of a small watershed, the lakes studied have only a minor effect upon the magnitude of baseflow discharge, increasing it slightly from October to January, and decreasing it from May to September. Baseflow quality is substantially affected. Natural dissolved ions, as represented by magnesium, are generally decreased in concentration and total load by the lakes. Road salt related inons are substantially increased in both concentration and total load in the baseflow. Surface runoff stored in the lakes is extremely enriched in salt in the winter, and the storage capacity of the lakes is sufficient to maintain winter salt concentrations in the baseflow near the lakes until summer. The storage effect also tends to damp out seasonal fluctuations in baseflow chloride content which are extreme in suburban watersheds. The difference in quality between the lake and non-lake baseflows and the linear distance needed for complete mixing are used as measures of the magnitude and distal extent of the lake effect on baseflow quality.     

分段重铬酸钾法测定高氯离子废水COD方法研究

通过对高盐废水COD测定时氯离子干扰与氧化剂浓度的关系研究发现:氧化剂浓度对氯离子干扰程度有较大的影响。根据研究结果,提出了用分段重铬酸钾法测定高盐废水COD的设想,并对此设想进行了验证。验证结果表明:用分段重铬酸钾法测定高盐废水COD的设想是完全可行的;而且方法的准确度较好,相对误差<9%,实际废水加有机物的回收率>92%。     

Soil-ecological conditions of the zone of salt waste dumping and plant adaptation to them

Technogenic surface formations near salt waste dumps are subject to salinization by sodium chloride. Synanthropic representatives of local flora that have adapted to salinization are characterized by increased concentrations of salinizing ions; redistribution of chlorides, with their predominant accumulation in above-ground organs; selective absorption with respect to sodium, chloride, and potassium ions; and decreased activity of hydrogen ions in cells.     

电路板蚀刻废液及其回收铜盐产品中PCBs污染特征

POPs(持久性有机污染物)是近年来广受关注的一类环境污染物. 为研究工业过程中POPs的运转迁移,针对电路板蚀刻废液及其回收后生产的铜盐产品中7种指示性PCBs(多氯联苯)及CB-209进行分析. 结果表明,PCBs在碱性废液和微蚀废液中未检出,而在酸性废液中有不同程度检出,ρ(∑₈PCBs)在0.41~60.80 ng/L之间,其中ρ(∑₇指示性PCBs)在0.24~58.00 ng/L之间. 3种铜盐产品〔CuCl₂、Cu₂(OH)₃Cl和CuSO₄〕中,CuSO₄中w(∑₈PCBs)相对较高,在2.75~284.00 ng/kg之间;而CuCl₂中w(∑₈PCBs)在6.95~31.50 ng/kg之间;Cu₂(OH)₃Cl中w(∑₈PCBs)在7.31~9.42 ng/kg之间. 污染物指纹特征表明,酸性蚀刻废液及其铜盐产品中的PCBs具有十分相似的分布特征,CB-28是最主要的检出单体,并且w(CB-209)相对较高,表明铜盐产品中的PCBs主要来源于生产原料(酸性蚀刻废液)的携带,而酸性蚀刻废液中污染物来源须待进一步分析研究.      

入侵藤本薇甘菊的耐盐能力

薇甘菊Mikania micrantha Kunth为原产中南美洲的入侵藤本植物,现已在全球热带和亚热带地区照成严重的生态问题。野外观察发现薇甘菊已在珠三角沿海植被中滋生。为揭示薇甘菊的耐盐能力及其对滨海盐生植被的潜在危害性,分别对薇甘菊种子、根系和茎干在不同盐度胁迫下的响应进行了测定。在珠三角地区采集了薇甘菊3个批次的种子,并选取珠江三角洲6种常见植物（菊科假臭草Eupatorium catarium、藿香蓟Ageratum conyzoides、野茼蒿Crassocephalum crepidioides、鬼针草Bidens pilosa、翅果菊Pterocypsela indica和旋花科小花假番薯Ipomoea triloba）作为对照,测定了它们在不同NaCl盐度（质量分数）胁迫下的萌发率和幼苗生长;为揭示薇甘菊种子是否可由海水传播,将薇甘菊和对照植物假臭草、藿香蓟和鬼针草在不同盐度条件下浸泡不同时间后解除胁迫再观测其种子萌发率;为确定薇甘菊能否在滨海盐土中无性繁殖,分别对薇甘菊的根系和茎干在盐水浸泡下的植株生长进行了测定。研究结果表明：1）总体而言,薇甘菊3个种群在≤0.6%盐度胁迫下的种子萌发率均与对照组无显著差异,个别种群的这一阈值可高达1.5%,明显高于其他对照植物;同一盐度胁迫条件下,薇甘菊幼苗根系和苗高生长受抑制程度明显低于对照植物。2）即使经高达3.0%盐度胁迫浸泡长达12 d后,薇甘菊、藿香蓟和假臭草种子的萌发率也没有受到显著影响,而鬼针草种子的萌发率有明显下降;四种植物受浸泡后萌芽的幼苗生长均正常。3）薇甘菊根系受0.5%盐度胁迫时没有植株死亡,但苗高增长仅为对照组的53.3%;根系在1.0%盐度胁迫下有95%的植株能存活至少25 d,但苗高增长仅为对照的18.9%;根系在≥1.5%盐度胁迫下薇甘菊无法存活。4）被清水浸泡的薇甘菊茎茎叶均能存活且在全部被浸泡的节上萌芽。当薇甘菊茎干受≥1.0%盐水浸泡时,受浸泡的叶片全部死亡,在1.0%、2.0%和3.0%盐度胁迫下受试茎第21天的死亡率分别为42.9%、40.9%和86.4%。以上结果表明薇甘菊对盐生生境具一定的适应能力,可能通过种子萌发或无性繁殖扩张的方式对滨海盐生植被构成威胁,应当引起重视。