机械清洗法对MBR膜泥饼层的影响

膜污染是制约MBR发展的瓶颈。考察投加ABS颗粒对MBR膜组件上膜泥饼层的影响,并设对照实验。结果表明,对照MBR膜通量下降速度快,膜污染严重,膜表面上累积厚厚的泥饼层,而在ABS MBR中膜通量下降速度则缓慢的多,且膜上泥饼层积累量则明显少于对照MBR;曝气量越大,颗粒运行的速度也越快,泥饼层被撞落量也越多;颗粒以碰撞角度为45°冲刷膜的情况下,泥饼层掉落效果明显增加;泥饼层包裹的膜丝根数越多,泥饼层的静摩擦力和保持泥饼层不被破坏的力也越大,泥饼层就越难被冲刷掉。SEM照片显示,ABS MBR的膜孔堵塞要严重于对照MBR,表面的褶皱要较对照MBR多。     

Determination of o-phthalic acid in snow and its photochemical degradation by capillary gas chromatography coupled with flame ionization and mass spectrometric detection

Phthalic acid and its photochemical degradation has been determined in snow and rainwater samples collected during winters (2003-2010) in the Southeast of Massachusetts using capillary gas chromatography (GC) with flame ionization and mass spectrometric detection. Water samples were dried using a rotary evaporator and derivatized with a 14% BF₃/methanol reagent before GC analysis. The developed method proved simple and accurate. Phthalic acid was found in snow samples collected in a concentration range of 7.22-76.5 nM. The photodegradation of phthalate was carried out under 300 nm UV light. The direct photodecomposition of the acid is slow (5% h⁻¹). However, the addition of dissolved Fe(III) species at 2.0 μM accelerated the light-induced degradation of phthalic acid by 3.5 times in the atmospheric water samples. Photodegradation rates of phthalic acid increases with decreasing pH value of water samples in the range of pH 2.8-4.5.     

Polychlorinated dibenzo-p-dioxin and dibenzofuran in urban air of an Andean city

Particle-bound polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in ambient air were monitored together with particulate matter less than 10 μm (PM₁₀) at three sampling sites of the Andean city of Manizales, Colombia; during September 2009 and July 2010. PCDD/Fs ambient air emissions ranged from 1 fg WHO-TEQ m⁻³ to 52 fg WHO-TEQ m⁻³ in particulate fraction. The PM₁₀ concentrations ranged from 23 μg m⁻³ to 54 μg m⁻³. Concentrations of PM₁₀ and PCDD/Fs in ambient air observed for Manizales - a medium sized city with a population of 380 000 - were comparable to concentrations in larger cities. The highest concentrations of PCDD/Fs and PM₁₀ found in this study were determined at the central zone of the city, characterized by public transportation density, where diesel as principal fuel is used. In addition, hypothetical gas fractions of PCDD/Fs were calculated from theoretical K_p data. Congener profiles of PCDD/Fs exhibited ratios associated with different combustion sources at the different sampling locations, ranging from steel recycling to gasoline and diesel engines. Taking into account particle and gas hypothetical fraction of PCDD/Fs, Manizales exhibited values of PCDD/Fs equivalent to rural and urban-industrial sites in the southeast and center of the city respectively. Poor correlation of PCDDs with PM₁₀ (r = −0.55 and r = 0.52) suggests ambient air PCDDs were derived from various combustion sources. Stronger correlation was observed of PCDFs with PM₁₀. Poor correlation between precipitation and reduced PM₁₀ concentration in ambient air (r = −0.45) suggested low PM₁₀ removal by rainfall.     

The effect of oxygen on chemical dechlorination of dieldrin using iron sulphides

The degradation of dieldrin by ferric sulphide (FeS₂) in aqueous solution was investigated when shielded against sunlight. An oxidative dechlorination process was observed under aerobic and anaerobic conditions; oxygen volume changed the degradation rate of dieldrin and the generation rate of reaction products. The dechlorination rate under microaerophilic conditions was fastest among the anaerobic to air oxygen concentrations. For this experiment, over 99% of the dieldrin was degraded, and 90% of the released chloride was detected after 30 d under 10 μmol oxygen. The major reaction products were different depending on the dose of oxygen. In the case of aerobic conditions, low molecular weight organic acids, such as formic acid, lactic acid, and oxalic acid, were generated as major reaction products. However, under anaerobic conditions, C₁₆H₂₂O₄ (dibutyl phthalate) and C₆H₁₃ClO (3-chloro-4-methyl-2-pentanol) were detected as reaction intermediates, and small amounts of succinic acid, malonic acid, and formic acid were also generated. These reactions proceed by FeS₂ interface reactions with H₂O under anaerobic condition, or O₂ under aerobic condition.     

Arsenic strongly associates with ferrihydrite colloids formed in a soil effluent

Arsenic mobility may increase in liquid phase due to association with colloidal Fe oxides. We studied the association of As with Fe oxide colloids in the effluent from water-saturated soil columns run under anoxic conditions. Upon exfiltration, the solutions, which contained Fe²⁺, were re-aerated and ferrihydrite colloids precipitated. The entire amount of effluent As was associated with the ferrihydrite colloids, although PO₄³⁻, SiO₄⁴⁻, CO₃²⁻ and dissolved organic matter were present in the effluent during ferrihydrite colloid formation. Furthermore, no subsequent release of As from the ferrihydrite colloids was observed despite the presence of these (in)organic species known to compete with As for adsorption on Fe oxides. Arsenic was bound via inner-sphere complexation on the ferrihydrite surface. FTIR spectroscopy also revealed adsorption of PO₄³⁻ and polymerized silica. However, these species could not impede the quantitative association of As with colloidal ferrihydrite in the soil effluents.     

Variability of dust iron solubility in atmospheric waters: Investigation of the role of oxalate organic complexation

Atmospheric dust deposition is a major external iron source for remote surface ocean waters. Organic complexation is known to play a role in the dissolution of iron-containing minerals. In this paper, we present our study on the effect of oxalate on dust iron solubility in simulated rainwater. Our results reveal that the solubility of iron carried by analogs of different African dusts varies with the dust source. Our experiments indicate a positive linear correlation between iron solubility and oxalate concentration. Soluble iron (SFe) increases from 0.0025(±0.0005)% to 0.26(±0.01)% of total iron, considering all dust sources and with oxalate concentrations ranging from 0 to 8 μM. These results show that the observed variability of iron solubility in aerosols collected over the Atlantic Ocean is, at least partly, due to an increase in dust iron solubility, with the presence of oxalate complexation, rather than to the presence of more soluble anthropogenic iron. Considering the mineralogical composition of those particles, experiments with pure minerals (hematite, goethite and illite) were performed to study the dissolution process. We found that oxalate promotes the solubility of iron contained in clay and hence confirmed that more than 95% of SFe from soil dust is provided by clay (illite). This experimental work enables us to establish a parameterization of iron solubility in dust as a function of oxalate concentration and based on the individual iron solubility of pure iron-bearing minerals usually present in dust particles. Finally, our results emphasize that oxalate contributes to iron solubility on the same order of magnitude as the acid processes. Organic complexation appears to be a process that increases iron solubility and likely enhances the bioavailability of iron from dust.     

Mobility of Cd and Cu in formulated sediments coated with iron hydroxides and/or humic acids: a DGT and DGT-PROFS modeling approach

The diffusive gradients technique in thin films (DGT) was used to investigate the kinetic resupply of Cd and Cu to pore water from the solid phase. For the sake of simplification, experiments were performed using formulated sediments that differed in the presence or absence of humic acids (HA) and/or of iron hydroxides (i.e., goethite and ferrihydrite). The effects of the time after the contamination of the solid phase (aging effect) on formulated sediments that were coated with goethite and HA and spiked with Cd were also evaluated. Kinetic DGT results were interpreted using the newly developed, multi-compartmental model DGT-PROFS.Due to Cu humate formation, the addition of HA slightly increased the Cu concentration in the pore water independent of the effect of the iron hydroxide coating on the formulated sediments and slightly decreased that of Cd. The impact of 8-190 d of aging resulted in a significant decrease in the Cd concentration of the pore water over an increasing incubation time.Modeling our results with DGT-PROFS led to the following conclusions concerning the impact of HA and iron hydroxides on Cd and Cu availability. First, in the presence of HA and absence of iron hydroxides, Cd is associated mainly with weak sites, while Cu is bound to strong sites. Similarly, in the presence of both iron hydroxides and HA, Cu appeared to be more heavily associated with the strong sites than did Cd. When the incubation time increased from 8 to 190 d, a proportion of Cd initially adsorbed onto weak sites transferred to the strong sites, suggesting that the adsorption of Cd on sediments is controlled partially by slow kinetic processes.     

Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

火电厂烟气排放对广州大气环境的影响

广州市是酸雨、可吸入颗粒物污染严重的地区之一,这与其能源结构以煤为主有关.广州发电厂以燃煤为主,其周围大气采样数据分析显示燃煤电厂可对周围大气环境造成较大影响,是酸雨前体物、可吸入颗粒物的主要排放源.酸雨破坏了生态环境,也阻碍了经济的发展;燃煤排放的烟尘细颗粒物属于可吸入颗粒物,其上附着的As、Cr等微量元素多为致癌物质和致基因毒性诱变物质,对周围居民的健康危害极大.最后, 对当前的环境保护工作及存在的问题进行了阐述.     

锚喷粉尘受力及产尘机理分析

通过对锚喷粉尘的受力分析,基于粉尘颗粒的基本性质,运用牛顿运动规律、流体力学的紊流射流、两相流等相关理论,对锚喷产尘原因及运动规律研究,认为锚喷尘源产生的4种方式: 粉尘颗粒自身的特性及二次风流的影响,高速喷射气流带动周围的空气运动所产生的剪切作用,锚喷高速射流内部中团粒间的相互作用以及物料与受喷面的碰撞是影响锚喷产生粉尘的主要原因.